重稀土高氯酸盐甲基苯甲酰甲基亚砜配合物的合成及Tb3+的发光

合成了重稀土高氯酸盐甲基苯甲酰甲基亚砜配合物RE(ClO4)3·L5·C2H5OH(RE=Gd,Tb,Dy,Tm,Yb;L=C6H5COCH2SOCH3).经元素分析、稀土络合滴定、摩尔电导及热重分析确定了配合物的组成,测定了配体及配合物的IR谱、1H NMR及铽配合物的磷光光谱、荧光激发和发射光谱,根据荧光发射光谱数据计算了铽配合物的各能级值.     

The numerical method for three-dimensional impact with friction of multi-rigid-body system

The differential equations for planar impacts reduce to an algebraic form, and can be easily solved. For three dimensional impacts with friction, there is no closed-form solution, and numerical integration is required due to the swerve behavior of tangential impulse during collisions. The dynamic governing equations in the impact process are built up in impulse space based on the Lagrangian equation in this paper. The coefficient of restitution defined by Poisson is used as the condition of impact termination. A valid numerical method for solving three-dimensional frictional impact of multi-rigid body system is established. The singular cases of tangential movement in sticking point are especially noticed and analyzed. Several examples are present to reveal the different kinds of tangential movement modes varied with the normal impulse during collision.     

基于顺序形态变换的生物芯片图像网格化

生物芯片图像网格化是对由生物芯片扫描得到的荧光成像中的信号(Foreground)和背景(Background)进行划分,以便提取各点的吸光度值、面积和吸光度比等荧光点的数据。网格化的准确与否决定了数据提取的正确性。提出了一种运用顺序形态变换理论实现生物芯片荧光图像网格化的方法,通过对百分位值在0~1之间的顺序形态进行变换,可实现像素灰度的极小值、中间值等多刻度值的灰度取值运算。理论分析表明,该算法能够识别信号与背景的边界,可去除噪声等非边界信息,能判断信号区域,可确定荧光点的边界和范围,可实现荧光点阵图像的网格化。试验结果表明,该算法对不同信噪比的荧光图像来说有很强的适应性,可用于高密度生物芯片图像的处理。     

Elastic Transfer Reactions of 25MeV/u 6He on 9Be Target

Angular distributions for elastic transfer in the ⁶He+⁹Be system were measured at the incident ⁶He laboratory energy of E=150MeV. From a distorted-wave Born approximation (DWBA) analysis,³He spectroscopic amplitude in ⁹Be were extracted and compared with values obtained by shell model calculations. The result shows that the spectroscopic amplitude is much greater than 0.70.     

ICP-AES测定Ni-Cr合金在人工唾液中析出的Ni离子

在模拟口腔环境下用人工唾液浸泡Ni-Cr桥,150h后采用ICP-AES测定Ni-Cr桥在人工唾液中的Ni离子析出量.镍在0.01-7.5μg/mL内有良好的线性关系,相关系数为0.9998;方法检出限为0.0059μg/mL;标准加入法测定镍的回收率为92.3%-99.8%.     

Dynamic Properties of Two-Dimensional Polydisperse Granular Gases

We propose a two-dimensional model of polydisperse granular mixtures with a power-law size distribution in the presence of stochastic driving. A fractal dimension D is introduced as a measurement of the inhomogeneity of the size distribution of particles. We define the global and partial granular temperatures of the multi-component mixture. By direct simulation Monte Carlo, we investigate how the inhomogeneity of the size distribution influences the dynamic properties of the mixture, focusing on the granular temperature, dissipated energy, velocity distribution, spatial clusterization, and collision time. We get the following results: a single granular temperature does not characterize a multi-component mixture and each species attains its own "granular temperature"; The velocity deviation from Gaussian distribution becomes more and more pronounced and the partial density of the assembly is more inhomogeneous with the increasing value of the fractal dimension D; The global granular temperature decreases and average dissipated energy per particle increases as the value of D augments.     

米散射理论在新型导光板中的应用

根据米散射理论,提出了新型导光板的设计思路,计算并分析了对于一定波长的入射光,不同粒径的微粒的散射特性。总结了随着微粒粒径的变化,散射效率、消光效率与背向散射效率的变化规律,分析了散射过程中的偏振度随粒子粒径几散射角变化的情况,同时模拟计算了多个微粒对同一波长的入射光经过多次散射后的概率统计结果。     

以改进的迈克尔逊干涉仪测量LED封装材料的热膨胀系数

LED封装材料在封装的过程中由于热膨胀的缘故会产生应力,将对LED的发光效率产生较大影响。改装的迈克尔逊干涉仪用于测量二氧化钛/有机硅复合的LED封装材料在不同温度范围内的热膨胀系数,具有测量准确,分辨率高等优点。     

液滴在粗糙固体表面上的铺展特性

本文建立了粗糙固体表面上液滴铺展过程的理论模型并采用了格子Boltzmann方法进行数值模拟,研究了粗糙与光滑表面上液滴铺展过程的形貌变化。研究结果表明,无论表面光滑还是粗糙,液滴都沿着半径方向逐渐铺展,整体首先呈帽形,随着时间的推移,液滴在表面铺展成一平面。粗糙表面与光滑表面铺展特性间的差异主要在于粗糙表面液滴受到粗糙元干扰,其铺展形状随时间推移由圆形向八边形过渡.粗糙元间隙的增大导致液滴润湿半径增大,液滴厚度沿半径方向变化梯度降低。