Oxidation of n-Butanol and 2-Pentanol with Molecular Oxygen in Supercritical CO2

Oxidation of n-butanol and 2-pentanol using molecular oxygen in supercritical (SC) CO2 with and without co-solvent is investigated. The results showed that the reaction selectivity is high when the reaction is carried out in SC CO2. It has been observed that co-solvent affects conversion and selectivity of the reaction considerably.     

CH_3O与CIO双自由基反应机理的量子化学研究

在QCISD(T)/6-311+G(d,p)//B3LYP/6-311+G(3df,3pd)水平上,对CH3O与ClO双自由基反应进行了理论研究.结果表明,该反应共有三个反应通道,产物分别为HOCI+CH2O,CH2O2+HCl和CH3Cl+O2(1△).不论从动力学角度,还是从热力学角度看,形成产物HOCl+CH2O的通道均是最有利的,因此为主要反应通道,这与实验观察到的结果是一致的.     

Fe(OH)2悬浮液在EDTA作用下氧气氧化生成δ-FeOOH的机理研究

At room temperature and in the presence of trace EDTA, the formation of δ-FeOOH was studied by the rapid oxidation of Fe(OH)2 suspension with O2. The structural and morphological changes were characterized by various techniques such as XRD, FTIR and TEM. γ-FeOOH and (δ-FeOOH) formed simutaneously in the early period of oxidation. But as the rate of mass transfer was in equilibrium, trace (γ-FeOOH) vanished gradually. Accordingly, pure phase δ-FeOOH was obtained. At the same time, critical amount ratio K of EDTA to Fe2+ was verified. The experiments show that the reactivity, rate of the oxidizing agent and pH of the initial medium were important factors for the formation of pure phase (δ-FeOOH). Under the auxiliary effect of EDTA, the reactivity of O2 was nearly improved to that of H2O2. And the process of the oxidation that Fe(OH)2 suspension was oxidized by O2 under that condition was discussed.     

EQCM技术对电子传递促进机制的研究

本文报道了腺嘌呤存在时对超氧化物歧化酶在金丝电极上电化学行为的影响。并从电化学石英晶体微天平技术的测量结果，初步讨论了腺嘌呤对促进超氧化物歧化酶电子传递过程的作用机制。     

可生物降解聚合物药物释放数学模拟研究进展

由于可降解的聚合物作为药物载体可以使得药物释放具有较高的靶向性、药物释放更加平缓 ,特别是可以使一些不稳定、半衰期短的药物在人体内达到可控制释放的效果 ,因此将可降解聚合物应用于药物释放体系中作为药物载体得到了较深入的研究。随着研究的深入 ,通过数学方法模拟或预测聚合物载体的降解过程以及聚合物降解过程中药物的释放行为是控释体系设计与应用的一个重要发展方向。由于影响因素较多 ,将所有因素逐一考虑将使得数学模型过于庞杂而失去实际意义 ,所以一个数学模型通常只考虑最主要几个的影响因素 ,并对药物释放系统进行相应的假设。目前文献中报道的降解 (溶蚀 )控制药物释放体系的数学模型大致可以分为两类 :假设药物释放按照零级过程 (zeroorderprocess)进行的经验模型和考虑影响药物释放的多种物理化学过程(如局部传质、化学反应 )的理论模型。本文综述了这些理论模型及其研究进展     

Solid-state synthesis and properties of SmCoO3

In this paper, perovskite oxide SmCoO₃ was prepared by the solid-state reaction method using Co₂O₃ and Sm₂O₃ as raw materials. The structure and properties of the samples were investigated by XRD, Raman spectral techniques, and DC measurements and so on. The results of XRD and Raman spectra showed that the mixtures of Co₂O₃ and Sm₂O₃ can react to produce a single phase perovskite oxide SmCoO₃ around 1353 K. The single-phase SmCoO₃ changes from an insulator to a semi-conductor and transition occurs around 470 K. The thermal expansion coefficient (2.17 × 10⁻⁵ K⁻¹) of the single-phase SmCoO₃ is approximately equal to that of doped LaGaO₃, but much bigger than that of SDC(Ce_0.85Sm_0.15O₂) above 873 K.     

软刻蚀及其应用

软刻蚀是一类基于自组装和复制模塑等原理的非光刻微米和纳米加工方法。它为形成和制作微米、纳米图案提供了简便、有效、价廉的途径。在软刻蚀中，用一个表面带图案的弹性模板来实现图案的转移，其加工的分辨率可达30nm－100μm。软刻蚀是微接触印刷、复制模塑、转移微模塑、毛细微模塑、溶剂辅助微模塑等的总称。本文将简介软刻蚀的原理、方法以及它们在微米和纳米加工、微电子学、材料科学、光学、微电子机械系统、表面化学等方面的应用。     

New ceramides from the flower of Albizia iulibrissin

A new ceramide and its glycoside were isolated from the flower of Albizia julibrissin. Their structures were established as (25,35,4R,8E)-2-[(2'R)-hydroxyhexadecanoylamino]-8-tetra-cosene-l,3,4-triol(I)and 1-O-β-D-glucopyranosy1-(2S,3S,4R,8E)-2-[(2'R)-hydroxy-hexade-canoylamino]-8-tetracosene-1,3,4-triol (II) on the basis of chemical and spectroscopic studies.     

Oxidation of Styrene with Molecular Oxygen in Supercritical CO2

The oxidation of styrene with molecular oxygen catalyzed by PdCl2 CuCl2 has been investigated in supercritical CO2 with a batch reactor. The oxidative system of styrene contains four components at the beginning and seven components during the reaction. The critical temperature, critical pressure, and critical density at different conversions are determined by using a high-pressure view cell. The effect of phase behavior on the conversion and selectivity were studied. Experimental results showed that the critical parameters of the reaction mixture at fixed initial molar ratio changed with the conversion of reactant. The conversion of styrene reached maximum near the critical density of the reaction mixture. Product selectivity also varied with density of reaction mixture and could be tuned to some degree.     

Synthesis of Novel Nucleoside Analog （3R）-2,3-Dideoxy-3-（N-hydroxy-N-methylamino）-L-arabinofuranosyl Uracil

The synthesis of novel nucleoside analog (3R)-2,3-dideoxy-3-(N-hydroxy-N-methylamino)-L-arabinofuranosyl uracil was studied. A twelve-step synthetic route, started from L-ascorbic acid, was designed, and the final product was obtained in 20.8% yield.