三元层状MAX相固溶体研究进展

MAX相是一类具有层状结构的三元碳化物或(和)氮化物,M是过渡金属元素,A主要是ⅢA~ⅤA族元素,X是C或N元素。这类化合物兼具陶瓷材料和金属材料的特点,具有优异的导电、导热、耐腐蚀以及抗氧化等性能,在诸多领域具有潜在应用价值。近年来,新元素、新结构和固溶体MAX相的不断出现,进一步扩展了MAX相家族。固溶体MAX相是将合适的元素固溶到已知MAX相中而得到的新MAX相。本文分四类总结了127种MAX相固溶体,对其结构改变和性能调控进行了概括,并指出目前研究存在的理论问题和亟须解决的关键技术,最后对MAX相固溶体的发展进行了预测和展望。     

非对称铺层复合材料层合板质量优化设计

复合材料广泛应用于航空航天等领域,追求轻量化设计已经成为研究重点.对复合材料层合板质量优化设计,可以减少层合板的纤维用量,减小层合板的质量,降低成本.首先研究复合材料层合板在承受轴向载荷时,产生的形变量、应力示意图,分析容易发生失效部位;以层合板铺层厚度为设计变量,最大应变、铺层比例等为约束条件,最小化层合板质量为优化...     

旋转状态半受限冲射流流动和换热特性研究

利用数值模拟的方法,通过改变冲击雷诺数Rej(20000-35000)、旋转数Ro(0-0．0117)等参数,分析旋转条件下半受限单孔冲击射流的流动和换热特性,讨论了旋转对冲击射流的流场结构和换热特性的影响．研究结果表明:冲击射流在离心力和哥氏力的共同作用下发生弯曲,造成冲击靶面上的冲击斑随着旋转数Ro的增加而不断偏移,显著影响了冲击的冷却效果．冲击靶面的平均Nu数随着冲击雷诺数Rej的增加而增加;当旋转数Ro增加时,冲击靶面的平均Nu数先增加,后减小,然后再增加．计算结果和试验结论基本一致．     

Ring-opening metathesis copolymerization employing ruthenium-based metathesis catalysts

The copolymerization of both high- and low-strain cyclic olefins employing three ruthenium-based metathesis catalysts is desribed. The effect of the ligand environment as well as the nature of the carbene on the copolymerizations is discussed.     

ICP-MS测定中草药狼毒中稀土和微量元素

研究了电感耦合等离子体质谱法(ICP-MS)测定中草药狼毒中稀土和微量元素的方法,样品处理通过低温灰化方法与硝酸-过氧化氢消解方法比较,实验确认微量元素采用低温灰化法制备样品, 稀土元素采用酸消化法制备样品,可以满足该方法检测要求,具有测试方法准确、快速等优点。 方法的准确度在1.21%～15.15%, 精密度在0.38%～8.54%之间。 该方法完全可以满足中草药样品中稀土和微量元素检测要求。     

自适应H.264可变块编码模式选择算法

为了减少H.264/AVC帧间编码模式选择的计算复杂度,利用编码模式之间的相关性以及视频序列时空域的相关性,提出了有选择性的小块搜索技术和有选择性的帧内编码模式搜索技术。模拟结果表明,该算法在保持率失真性能的前提下可以大幅度减少模式选择的计算复杂度,有利于H.264的实时应用。     

PbSe/TiO2同轴异质结纳米管的制备及光催化性能

通过溶液法合成了PbSe/TiO2复合纳米管,并对其进行了微观形貌、晶体结构等的表征。结果表明,制得的样品是由PbSe和TiO2两种材料构成的复合材料,致密、均匀的TiO2薄膜包覆在PbSe纳米管表面。以氙灯为模拟光源,通过对甲基橙的降解研究了PbSe/TiO2复合纳米管的光催化性能。结果显示,PbSe与TiO2之间形成的异质结使PbSe/TiO2复合纳米管具有较高的光催化性能,比纯PbSe纳米管的催化降解率提高了约4.5倍。另外,对PbSe/TiO2复合纳米管光催化稳定性也进行了研究。     

基于简单MOPA结构实现3.08 kW全光纤窄线宽线偏振激光输出

基于简单的主振荡功率放大结构,演示了一种高功率窄线宽线性偏振全光纤激光器,其最大输出功率为3.08 kW,3 dB线宽为0.2 nm。在整个功率缩放过程中,偏振消光比约为94%,光束质量M 2约为1.4。这是国内外首次实现3 kW全保偏光纤激光输出,与基于相位调制的窄线宽激光器相比,该激光器可实现近似的线宽,同时具有受激布里渊散射阈值高、系统结构简单、成本低等特点。     

Modeling Geometric State for Fluids in Porous Media: Evolution of the Euler Characteristic

Multiphase flow in porous media is strongly influenced by the pore-scale arrangement of fluids. Reservoir-scale constitutive relationships capture these effects in a phenomenological way, relying only on fluid saturation to characterize the macroscopic behavior. Working toward a more rigorous framework, we make use of the fact that the momentary state of such a system is uniquely characterized by the geometry of the pore-scale fluid distribution. We consider how fluids evolve as they undergo topological changes induced by pore-scale displacement events. Changes to the topology of an object are fundamentally discrete events. We describe how discontinuities arise, characterize the possible topological transformations and analyze the associated source terms based on geometric evolution equations. Geometric evolution is shown to be hierarchical in nature, with a topological source term that constrains how a structure can evolve with time. The challenge associated with predicting topological changes is addressed by constructing a universal geometric state function that predicts the possible states based on a non-dimensional relationship with two degrees of freedom. The approach is validated using fluid configurations from both capillary and viscous regimes in ten different porous media with porosity between 0.10 and 0.38. We show that the non-dimensional relationship is independent of both the material type and flow regime. We demonstrate that the state function can be used to predict history-dependent behavior associated with the evolution of the Euler characteristic during two-fluid flow.

     

Novel stability condition for delayed fractional-order composite systems based on vector Lyapunov function

Nonlinear Dynamics - This paper proposes a novel stability condition for delayed fractional-order composite systems. First, we extend the vector Lyapunov function to the fractional-order systems to...