磁致伸缩-压电联合激励凹筒型发射换能器

设计制作了一种新型磁致伸缩-压电联合激励凹筒型发射换能器,采用稀土超磁致伸缩材料Terfenol-D与PZT压电陶瓷作为联合激励元件,模拟计算与实测结果均表明,与采用单一振子激励的凹筒型发射换能器相比,此种新型换能器在保持尺寸小、频率低等优点的同时,显著拓宽了工作频带并提高了辐射声功率.换能器外型尺寸为φ88 mm×316 mm,水中谐振频率1.30 kHz,-3 dB带通Q值1.43,谐振频率下发射电压响应级135.1 dB.     

Robust tracking for MIMO nonlinear time-dependent mismatched uncertain systems: non-adaptive versus adaptive control

This paper considers the problem of robust output-tracking controlfor multi-input multi-output (MIMO) nonlinear systems in thepresence of mismatched time-dependent uncertainties. It firstgeneralizes the stable combined-variable perturbation method(SCVPM) which was proposed by Li et al. (1996) to derive a newrobust controller and its adaptive version for MIMO systemsto track a desired trajectory. It is shown that both controllersnot only stabilize the closed-loop systems but also guaranteethat the tracking errors remain in an O() neighbourhood of theorgin, where is a small design parameter of the controller.Moreover, the adaptive robust controller is only based on thenominal system, and no a priori data on the uncertainties areneeded. Therefore, it is more feasibly implemented than thenon-adaptive controller.     

圆形工件正次品检验及再加工模型

针对圆形工件合格性检验问题建立了两个优化模型,运用Matlab软件进行编程求解,确定了圆心的位置,据此判断出工件一为正品,工件二为次品.接下来为判断能否将次品经过再加工使其成为正品,建立了模型三,并指出了对工件二的简单再加工方法.     

多维随机变量的线性相关性

本文研究了n维随机变量分量间的线性相关性,给出了衡量线性相关性程度的量以及具有(在概率1意义下)严格线性关系的充分必要条件.     

一类带输入时滞的线性时滞系统的新型自适应控制

针对一类带输入时滞且状态时滞常数未知的线性时滞系统,基于LMI方法,采用一种Lyapunov-Krasovskii函数和新型带记忆的状态反馈控制,突破以往自适应控制对估计值的大小限制,研究了一种新型的对该类系统未知状态时滞常数进行自适应控制的控制器设计问题,并且通过带记忆控制器中的常数的适当选取使得带记忆控制始终能反映未知时滞,仿真例子显示了该种方法的有效性.     

磷含量对NiMo/γ-Al_2O_3催化剂活性相结构的影响

采用程序升温还原(TPR)、高分辨透射电镜(HRTEM)和X射线光电子能谱(XPS)表征手段对共浸渍法制备的不同磷含量NiMo/γ-Al2O3催化剂进行了表征,研究了磷含量对NiMo/γ-Al2O3催化剂活性相结构的影响。TPR研究表明,磷能够减少四面体配位Mo物种的数量,增加八面体配位Mo物种的数量,促进高活性Ⅱ型"Ni-Mo-S"活性相的形成。HRTEM研究表明,随磷含量的增加,MoS2颗粒堆积层数增加,催化剂的加氢选择性提高;适量磷能够增加边角位有效Mo原子的分散度(fMo),增加催化剂表面加氢脱硫(HDS)和加氢脱氮(HDN)活性位的数量。上述结论得到了XPS表征的证实:适量磷增加了催化剂表面Mo原子浓度、提高有效助剂比率(PR)和提升比率(Ni/Mo),相应催化剂表现出最高的HDS和HDN活性;但过高磷含量能够引起MoS2颗粒过度堆积,片层长度过长,导致活性位数量减少,催化活性降低。     

生物合成咖啡酸苯乙酯体系的液相色谱-串联质谱快速分析

建立液相色谱-串联质谱(LC-MS/MS)检测生物合成咖啡酸苯乙酯体系中咖啡酸(Caffeic acid,CA)和咖啡酸苯乙酯(Caffeic acid phenethylester,CAPE)的方法。采用LC-MS/MS电喷雾电离(ESI),负离子选择反应监测(SRM)模式检测。以V(乙腈)∶V(水)∶V(冰醋酸)=55∶45∶0.5为流动相,流速1.0mL/min,Hypersil C18色谱柱分离并检测生物合成咖啡酸苯乙酯体系中的咖啡酸以及咖啡酸苯乙酯的含量,并对生物合成咖啡酸苯乙酯的收率进行了动力学分析。本方法在进样量为0.2～20μg时具有良好的线性关系,咖啡酸和咖啡酸苯乙酯样品的加标回收率分别为93.4%～98.2%和90.3%～97.8%,相对标准偏差分别为1.79%～2.56%和1.82%～3.67%,咖啡酸苯乙酯收率在3d内可以达到15.54%,表明本方法简便、快速、可靠。     

Synthesis and Single-crystal Structure of a Silver(Ⅰ) Carboxyarylphosphonate: [Ag(H_2BCP)(4,4'-bipy)]·2H_2O

The title compound, a novel Ag(Ⅰ) carboxyarylphosphonate [Ag(H2BCP)(4,4'- bipy)]·2H2O (H3BCP = p-H2O3PCH2C6H4COOH, 4,4'-bipy = 4,4'-bipyridine), was synthesized by a hydrothermal reaction and characterized by elemental analysis, IR spectra and single-crystal X-ray diffraction. It belongs to monoclinic system, space group P21/c with a = 5.7038(11), b = 22.397(4), c = 5.602(4) ?, β = 106.26(3)°, V = 1913.4(7) 3, Z = 4, C18H20N2O7PAg, Mr = 515.20, Dc = 1.788 g/cm3, μ = 1.182 mm-1, F(000) = 1040, the final R = 0.0404 and wR = 0.1216 for 4178 observed reflections with I 2σ(Ⅰ). In the structure, the Ag(Ⅰ) cations are bridged by 4,4'-bipy to give rise to 1D chains running along the b axis. These chains are linked further by the interactions of O (from BCP ligands) and Ag atoms to yield 2D layers. Hydrogen bonding interactions and weak π-π stacking interactions between 4,4'-bipy rings assemble such adjacent layers to generate a 3D supramolecular architecture.     

仪器分析理论课程教学实践与探索

仪器分析是一门实践性较强的专业基础课,其原理抽象、理论性强、内容广泛。在分析了仪器分析课程特点及实践教学中出现的问题的基础上,对该课程的教学模式及观念提出了改革措施,以激发学生学习兴趣,提高课堂教学效率,培养学生创新及实践能力。     

A study of the active thermal control for the high energy detector on the HXMT

A thermal control system (TCS) based on the resistance heating method is designed for the High Energy Detector (HED) on the Hard X-ray Modulation Telescope (HXMT). The ground-based experiments of the active thermal control for the HED with the TCS are performed in the ambient temperature range from -15 to 20 ℃ by utilizing the pulse width to monitor the interior temperature of a NaI(Tl) crystal. Experimental results show that the NaI(Tl) crystal's interior temperature is from 17.4 to 21.7 ℃ when the temperature of the PMT shell is controlled within (20±3) ℃ with the TCS in the interesting temperature range, and the energy resolution of the HED is maintained at 16.2% @ 122 keV, only a little worse than that of 16.0% obtained at 20 ℃. The average power consumption of the TCS for the HED with a low-emissivity shell is about 4.3 W, which is consistent with the simulation.