大焦深成像系统仿真实验研究

如何增大非相干光学成像系统的焦深是应用光学研究领域的热点问题.本文对采用高次非球面光学掩模板与图像处理相结合增大成像光学系统焦深的新方法进行了深入分析,建立了大焦深成像系统仿真实验模型,并进行了大焦深成像系统仿真实验.实验结果证明了该方法在维持原相对孔径的同时使光学系统在较大的离焦范围内有好的成像质量.实际应用中还要综合考虑模板参量、信噪比等关键因素.     

Reactivities of tetraalkyltin complexes toward Pt/HY zeolite

Tetraalkyltin complexes, SnR₄ (R = Me, Et, Pr, Bu) could react with Pt/HY at 193, 243, 273 and 333 K, respectively. The reactions occurred on the surface of the zeolite and the organotin grafted zeolites were characterized in detail. The framework and the microporous structure of the grafted Pt/HY zeolites were retained. However, the modified zeolites showed better size selectivity in the absorption of hydrocarbons.     

VALENCE AND EMISSION OF SAMARIUM IONS IN KMF(M:Mg、Ca)

The SmF_(2.01)was synthesized by reducing SmF_3 in H_2 stream.As it was doped inKM_gF_3 and KCaF_3.there was emission of Sm~(2+) in KMgF_3 but no emission of Sm~(2+) inKCaF_3 was observed.     

Sr2RuO4的热电势

Sr2RuO4是第一个无CuO面的层状强关联氧化物超导体.测量了9至260K温度范围内Sr2RuO4的热电势,观测到在此温度范围内其热电势为正值.用两种载流子模型对实验数据进行了拟合,并且与Hall系数的实验结果进行了比较,发现低温下两种载流子对热电势和Hall系数的贡献比较类似,但在高温区空穴对热电势的贡献很大而相应地对Hall系数的贡献不占主要地位. 关键词： Sr2RuO4 热电势     

非因子化方法研究D~+→ ■~0K~+衰变(英文)

在领头阶和αs 修正阶 ,用QCD因子化方法 ,并对它的软胶子效应用光锥QCD求和规则分析D+ → K0 K+ 衰变过程 ,我们分析发现朴素因子化方法的结果远离实验结果 ,QCD因子化方法结果靠近实验结果 ,但是 ,在QCD因子化方法中 ,若考虑软胶子效应 ,其结果与实验结果相一致 .另外 ,计算发现 ,软胶子效应在该衰变道中有相当大的贡献 ,因此不能被忽略     

Average Atom Model in Hot Plasmas

Ａｖｅｒａｇｅ　Ａｔｏｍ　Ｍｏｄｅｌ　ｉｎ　Ｈｏｔ　ＰｌａｓｍａｓＡｖｅｒａｇｅＡｔｏｍＭｏｄｅｌｉｎＨｏｔＰｌａｓｍａｓ￥ＹｕａｎＪｉａｎｈｕｉ；ＳｕｎＹｏｎｇｓｈｅｎｇ；ＺｈｅｎｇＳｈａｏｔａｎｇ（ＩｎｓｔｉｔｕｔｅｏｆＡｐｐｌｉｅｄＰｈｙｓｉｃ...     

Mössbauer studies on the hydrogenation and dehydrogenation of Nd16Fe76B8 magnet

Hydrogenation and dehydrogenation of the Nd₁₆Fe₇₆B₈ magnet are studied by X-ray diffraction analysis (XRD) and Mössbauer spectroscopy. The results of the samples treated under different hydrogen gas pressures at different temperatures are discussed. A special hydrogenation-dehydrogenation treatment of the Nd?Fe?B magnet cast can produce excellent isotropic magnet powders and the treated sample has passed a hydrogenation-disproportionation-recombination process.     

不同激发密度下CdS晶体的光致发光和受激发射

本文主要研究在77-111K温度范围内、不同激发密度的N2激光器的337.1nm谱线激发下,激子-激子(Ex-Ex)、激子-载流子(Ex-e)的相互作用和发射一个LO声子(Ex-1LO)、两个LO声子(Ex-2LO)的自由激子的辐射复合行为.并在77K温度下观测到由Ex-Ex发射产生的受激发射.     

Influence of preparation methods on structure and properties of PA6/PA66 blends: A comparison of melt‐mixing and in situ blending

The blends composed of polyamide 6 (PA6) and polyamide 66 (PA66) were obtained using two different preparation methods, one of which was the melt‐mixing through a twin‐screw extruder and the subsequent injection molding; and the other, the in situ blending through anionic polymerization of ε‐caprolactam in the presence of PA66. For the former, there existed a remarkable improvement in toughness but a drastic drop in strength and modulus; however, for the latter, a reverse but less significant trend of mechanical properties change appeared. Various characterizations were conducted, including the analyses of crystalline morphology, crystallographic form, and crystallization and melting behaviors using polarized optical microscopy (POM), wide‐angle X‐ray diffraction (WAXD), and differential scanning calorimetry (DSC), respectively; observation of morphology of fractured surface with scanning electron microscope (SEM); measurement of glass transition through dynamic mechanical analysis (DMA); and the intermolecular interaction as well as the interchange reaction between the two components by Fourier transform infrared spectrometry (FT‐IR) and ¹³C solution NMR. The presence and absence of interchange reaction was verified for the in situ and melt‐mixed blends, respectively. It is believed that the transreaction resulted in a drop in glass transition temperature (T_g) for the in situ blends, contrary to an increase of T_g with increasing PA66 content for the melt‐mixed ones. And the two kinds of fabrication methods led to significant differences in the crystallographic form, spherulite size and crystalline content and perfection as well. Accordingly, it is attempted to explain the reasons for the opposite trends of changes in the mechanical properties for these two blends. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1176–1186, 2007     

热电材料研究进展

在介绍热电材料制冷工作原理，分析热电材料优值系数的基础上，介绍了300K以下热电材料的研究进展，分析了热电材料的制冷特点、现状和应用前景．