射频磁控溅射CNx薄膜的结构与衬底温度关系的研究

使用射频磁控溅射方法在不同衬底温度下（ts=室温，350，500℃）于Si(001)衬底上沉积了CNx膜，并利用拉曼（Raman)光谱、傅里叶变换红外光谱（FTIR）及X射线衍射光电子能谱（XPS）对CNx膜的化学结合状态与温度的关系进行了研究。Raman光谱结果表明，随衬底温度（ts) 增加，D带向低频方向移动，G带向高频方向移动；它们的半高宽分别由375和150cm^-1减小至328和142cm^-1；ID／IG由3．76减小至2.88。FTIR谱中除无序D带（1400cm^-1)和石墨G带（1570cm^-1)外，还有－700cm^-1,～2210cm^-1(C=N),2330cm^-1(C-O)及3255－3351cm^-1(N-H)等峰。XPS测试结果表明：随衬底温度增加，N与C的物质的量比由0.49下降至0.38，sp^2(C-N)组分与sp^3(C-N)组分强度比呈增大趋势。低温（350℃）退火并未对CNx膜的化学结合状态产生较大影响；高温（900℃）退火样品则显示出较好的结晶化程度。     

高岭石无定形化的动力学研究

Amorphous kaolinite derivatives were prepared through mixing kaolinite with HCOOK and KOH solution. Ki-netics of kaolinite being turned into amorphous derivatvies was investigated by XRD. It showed that the transfor-mation included dynamic and diffuse controlling stages. And the active energy E₁=26.8kJ·mol^-1; E₂=12.2 kJ·mol^-1. TEM and SEM images showed that particle size of the amorphous derivatives was about 50nm. And the amorphous derivatives seemed like alumnsilicate gel， accompanied by some aggregates.     

光催化降解染料ZnO催化剂的性能

光催化法是20世纪70年代发展起来的新型水处理技术，即以某些半导体材料为催化剂，利用光催化法来降解环境污染物。该方法工艺简单，成本较低，在常温下能使大多数不能或难于生物降解的有毒有机物彻底氧化分解。近年来研究最多的是TiO2，由于其带隙较宽(3．2eV)，只能吸收波长λ≤387nm的紫外光，因此研制新型光催化剂仍是重要课题。     

Efficient asymmetric synthesis of an azasugar in water

An extremely efficient asymmetric synthesis of a pyrrolidine azasugar was completed in only four steps in water, without the use of protecting groups and in 60% overall yield from a simple, achiral bis-electrophile.     

吸热型碳氢燃料在银、镧改性混合分子筛上的裂解研究

为进一步提高吸热型碳氢燃料的吸热能效，考察了吸热型碳氢燃料NNJ－150在USHY和HZSM－5混合分子筛以及银、镧改性混合分子筛催化剂上的催化裂解。结果表明，在Ag-LaUSY Ag-LaZSM-5(75:25)混合分子筛催化NNJ－150裂解反应中，低碳烯烃选择性较高，催化剂寿命较长。采用此催化剂，能较好满足吸热型碳氢燃料裂解的需要。     

我国化学纤维新品种的发展

本文紧紧围绕发展我国化纤新品种的现状和展望,提出由“产品先导型”向“技术先导型”、由“市场开发型”向“发展型”过渡的发展展望。按化纤新品种几种主要发展途径,侧重就我国化纤新品种的成就,如:合成新的高聚物,化学、物理(包括结构)改性和纱线、织物后整理等,特别对共聚、共混、多种复合技术改性等,进行了重点讨论。     

烷基极化效应与X=O键伸缩振动频率

烷基取代物R’X=0的X=0键伸缩振动频率ν与烷基R的极化效应指数PEI(R)的关系可表示为:ν=a bPEI(R)。研究结果表明,烷基的极化效应使X=0键的伸缩振动频率降低。     

Palladium catalyzed synthesis of tertiary allylamines. Utilization of α-nitro olefins as allylic nitro compounds

Reaction of α-nitro olefins with secondary amines in the presence of palladium(O) catalyst affords allylic amines.     

锂离子电池负极合金CoSn和Cu-Sn的制备与表征

CoSn alloy and Cu-Sn samples were synthesized by H₂-reduction following solid-state reaction between Co(Ⅱ)， Cu(Ⅱ)， Sn(Ⅳ) and NaOH at ambient temperature. The samples were characterized by XRD， SEM. The results showed that CoSn alloy (80～200nm) is globe-shaped， ultrafine hexagonal material， and Cu-Sn alloy powder consists of two phases， i.e. Cu₆Sn₅ and Cu₃Sn. Cu-Sn powder has spherical morphology and the particle size is estimated to be 60～70nm. The electrochemical performances of CoSn alloy and Cu-Sn powder were studied using lithium-ions model cell Li/LiPF₆ (EC+DMC)/CoSn (or Cu-Sn). It was demonstrated the reversible discharge capacities for 10 cycles keep above 280mAh·g^-1 for nanophase Cu-Sn， and 60mAh·g^-1 for CoSn alloy. Differ-ential capacity plots showed that the reaction mechanisms of Cu-Sn with lithium were reversible.     

STUDIES ON CHARGE TRANSFER POLYMERIZATION——POLYMERIZATION OF ACRYLONITRILE INITIATED WITH PHENYL HYDRAZINE AND ITS DERIVATIVES

The photopolymerization of acrylonitrile (AN) initiated with phenyl hydrazine (PHZ) and its derivatives has been studied. The initiator exponent and monomer exponent were determined from the kinetic investigation to be 0.66th and 2.1th respectively and the overall activation energy was 33.4KJ/mol for the PHZ-AN system. Spectral analysis and other data indicate that a charge transfer complex between PHZ as a donor and AN as an aceeptor is formed. The initiation mechanism was proposed.