四氢呋喃-水-乙醇三元溶液体系制备高合金化Pt-Ru/CMK-3催化剂

提出了在四氢呋喃(THF)、H2O和乙醇三元体系中用一般的化学还原法在室温下制备高合金化Pt-Ru/CMK-3催化剂的新方法. 与在纯水中制得的商品化ETEK催化剂相比, 其Pt-Ru粒子的合金化程度高、平均粒径较小且相对结晶度低, 因此, 该催化剂对甲醇氧化的电催化活性远高于在纯水中制得的Pt-Ru催化剂. 高合金化程度的原因是H2PtCl6和RuCl3在THF、H2O和乙醇三元溶液体系中的起始还原电位相近. 此外, CMK-3以其规整的二维有序孔道结构, 为直接甲醇燃烧电池(DMFC)中电子和物质的传输提供了方便的路径, 其巨大的比表面积也为Pt-Ru 纳米粒子的均匀分散提供了良好的载体.     

Synthesis of 4(3H)-Quinazolinone Derivatives and Their in vitro Antitumor Activity

Classical antifolates containing L-glutamic acid moiety in molecule have shortcomings such as drug resistance which is originated from the defective cell transport by mutation, and toxicity to the host which is due to unnecessarily long retention inside normal cells.[1] One strategy to overcome these shortcomings is to design nonclassical lipophilic inhibitors of folate requiring enzymes by deleting or modifying L-glutamic acid component from the folate analogues.     

六元N-杂环配体TIAMPP的合成及其在不对称催化加氢中的应用

在三乙胺的作用下，利用（S）-3-羟甲基-1，2，3，4-四氢异喹啉（（S）-TicOL）和Ph2PCl缩合，得到六元N-杂环配体（S）-TIAMPP．研究了（S）-TIAMPP与Rh（I）形成的手性催化剂[Rh（（S）-TIAMPP）（COD）]BF。在脱氢氨基酸的衍生物中不对称催化加氢的对映选择性和适应性，以及该催化剂对N-苯甲酰基脱氢肉桂酸甲酯加氢过程中温度、压力、反应溶剂、底物与催化剂比例（S／C）对光学收率的影响．结果表明，在S／C=100，15℃，1．0MPa的甲醇溶液中，反应24h，[Rh（（S）-TIAMPP）（COD）]BF。对N-苯甲酰基脱氢肉桂酸甲酯加氢的光学收率可达到96％．     

用峰鉴别技术反相高效液相色谱法测定火锅汤料中微量吗啡

本文报道了以峰鉴别技术为定性依据的测定火锅汤料中微量吗啡的反相高效液相色谱法。本法采用改良的Ｓｔａｓ－ｏｔｔｏ法分离提取复杂样品中的微量吗啡。由于采用峰鉴别技术，增加了定性参数，大大提高了定性方法的准确性。本法简便、快速。最低检出浓度为０．０４ｍｇ／Ｌ。在数十例样品分析中，与其它仪器分析结果比照，非常符合。     

含氮给体结构对丙烯腈电荷转移光聚合的影响

<正> 对于正性烯类单体,主要是乙烯基咔唑的电荷转移聚合,诚田已作过详细综述。负性烯类单体的电荷转移聚合主要研究的单体是丙烯腈(AN)及甲基丙烯酸甲酯(MMA)。Barton等研究了芳烃为引发剂的MMA光聚合。我们研究了芳胺为引发剂的光聚合。 芳胺,尤其是芳叔胺,是较强的电子给体,与负性单体在光照下经激基复合物而引发聚合,我们的实验表明,吡啶及其同系物(喹啉与吖啶)并不象吡咯及其同系物(吲哚与咔唑)那样有效地引发AN等负性单体的光聚合(见表1)。从图1所示的结构看,它们有     

控制异丁烯阳离子聚合终止方式的新方法—活性中心转化法

控制异丁烯阳离子聚合终止方式的新方法──活性中心转化法曹宪一，王强，武冠英（北京化工大学高分子材料研究所，北京，１０００２９）关键词异丁烯，阳离子聚合，活性中心转化自八十年代中期Ｈｉｇａｓｈｉｍｕｒａ及Ｋｅｎｎｅｄｙ等人陆续发现乙烯基醚类单体及异丁烯...     

Chemical synthesis and firefly luciferase produced dehydroluciferyl-coenzyme A

Dehydroluciferyl-coenzyme A (L-CoA) was chemically synthesized and characterized by MS, UV-vis spectrometry and RP-HPLC. The identity of the chemically synthesized compound with the one that was produced by firefly luciferase was confirmed. Moreover, the reversibility of the enzymatic conversion of dehydroluciferin ? dehydroluciferyl-adenylate ? L-CoA was also confirmed. The chemical synthesis of L-CoA, described here, may help the clarification of the activator effect of CoA on luciferase bioluminescent assays, in which the enzyme catalyzed formation of L-CoA and the consequent destruction of L-AMP is one of the possible explanations for that effect.     

Studies on the Electrochemical Characteristics of K2FeO4 Electrode

Discharge performance of K2FeO4 electrode under different conditions was studied by the constant electric current discharge method. The electrochemical characteristics of K2FeO4 electrode were investigated for the first time by means of cyclic voltammetry. The results show that the K2FeO4 electrode made at moderate pressure (20MPa) and discharged at lower current has better discharge performance. It is also found that K2FeO4 electrode is significantly rechargeable.     

Shot noise sets the limit of quantification in electrochemical measurements

Detection of single molecules, particles, and rapid redox events is a challenge of electrochemical investigations and requires either an amplification strategy or significant averaging for the electrochemical current to exceed the noise level. We consider the minimum number of electrons required to reach the limit of quantification in these electrochemical measurements. A survey of the literature indicates that the state-of-the-art limit in current detection for different types of measurements (e.g. voltammetry, single-molecule redox cycling, ion channel recordings of single molecules, metal nanoparticle collision, and phase nucleation) is independent of the nature of the measurement and increases linearly with reciprocal response time, Δt^?1, over ～5 orders of magnitude (from ～10 to ～10⁶ s^?1). We demonstrate that the practical limit of quantification requires cumulative measurement of ～2100 electrons during Δt and is determined by statistics of counting electrons, that is, the shot noise in the current.     

3-(2-羟基苯基)-5-苯基-6-乙氧羰基-2-环己烯酮的合成与晶体结构

合成了3-(2-羟基苯基)-5-苯基-6-乙氧羰基-2-环己烯酮.通过元素分析、红外光谱、紫外光谱、核磁共振氢谱和质谱对其组成和结构进行了表征.利用X射线衍射分析方法测定了它的晶体结构.该化合物的晶体属单斜晶系,空间群P21/c,a=1.41946(17)nm,b=0.58445(7)nm,c=2.1756(3)nm,β=104.795(2)°,V=1.7450(4)nm3,Z=4,Dc=1.280 g·cm-3,F(000)=712,μ=0.088mm-1,R1[I＞2σ(I)]=0.0627,wR2[I＞2σ(I)]=0.1484.晶体结构测定结果表明化合物分子中的环己烯部分为半椅式构象,分子间通过氢键形成具有16元环的二聚体.