纳米级氧化铁的合成及其对六价铬的吸附性能研究

采用溶胶-凝胶法合成了纳米氧化铁,研究了合成条件,并采用TEM对产品进行了表征,测得产品的平均粒径为20-30nm.研究了纳米级氧化铁对Cr（Ⅵ）的吸附.在pH=3.0,吸附比为3.5×10-6:1×10-2（g/g）时,平均吸附效率为95.98％,最大吸附量为398.3μg Cr（Ⅵ）/g.采用2mol/LNaOH可完全洗脱纳米氧化铁所吸附的Cr（Ⅵ）,测定了回收后的纳米氧化铁对Cr（Ⅵ）的吸附效率,结果表明纳米级氧化铁可循环使用,这将为环境污水中Cr（Ⅵ）的治理及研究纳米材料的吸附行为提供参考.     

Structure for a graph with average genus

In [2], Chen et al. showed that the average genus for a graph of maximum degree at most 3 is at least 1/2 its maximum genus. In this paper, the structure for a graph of maximum degree at most 3 with average genus equal to 1/2 its maximum genus is described. Furthermore, LetH be a subgraph ofG and γ_avg(G) = γ_avg(H). It’s shown thatG can be obtained by a series operations of type I and II onH.     

Chaos Synchronization Criterion and Its Optimizations for a Nonlinear Transducer System via Linear State Error Feedback Control

Global chaos synchronization of two identical nonlinear transducer systems is investigated via linear state error feedback control. The sufficient criterion for global chaos synchronization is derived firstly by the Gerschgorin disc theorem and the stability theory of linear time-varied systems. Then this sufficient criterion is further optimized in the sense of reducing the lower bounds of the coupling coefficients with two methods, one based on Gerschgorin disc theorem itself and the other based on Lyapunov direct method. Finally, two optimized criteria are compared theoretically.     

Synthesis and light emitting properties of polyacetylenes having pendent fluorene groups

Five novel fluorene‐containing polymers, poly[(9,9‐dimethylfluoren‐2‐yl)acetylene] ( PFA1 ), poly[(1‐pentyl‐2‐(9,9‐dimethylfluoren‐2‐yl)acetylene) ( PFA2 ), poly[1‐decyl‐2‐(9,9‐dimethylfluoren‐2‐yl)acetylene] ( PFA3 ), poly[1‐phenyl‐2‐(9,9‐dimethylfluoren‐2‐yl)acetylene] ( PFA4 ), and poly[1‐(3,4‐difluorophenyl)‐2‐(9,9‐dimethylfluoren‐2‐yl)acetylene] ( PFA5 ) were synthesized by the polymerization of the corresponding fluorene‐substituted acetylenic monomers ( M1–M5), using WCl₆, MoCl_5, and TaCl₅ as catalysts and n‐Bu₄Sn as a cocatalyst. The synthesized polymers were thermally stable and readily soluble in common organic solvents. The degradation temperatures for a 5% weight loss of the polymers were ∼352–503 °C under nitrogen. PFA1–PFA5 show emission peaks from 402 to 590 nm. Besides, their electroluminescent properties were studied in heterostructure light‐emitting diodes (LEDs), using PFA2–PFA5 as an emitting layer. The PFA5 device revealed an orange‐red emission peak at 602 nm with a maximum luminescence of 923 cd/m² at 8 V. A device with the ITO/PEDOT/ a mixture of PFA2 (98 wt %) and PFA5 (2 wt %)/Ca/Al showed near white emission. Its maximum luminance and current efficiency are 450 cd/m² at 15 V and 1.3 cd/A, respectively. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 519–531, 2006     

A MEMS-Based Piezoelectric Power Generator for Low Frequency Vibration Energy Harvesting

A novel power generator has been achieved to convert vibration to electrical energy via the piezoelectric effect. The generator obtained by micro fabrication process mainly consists of silicon based frame and composite cantilever. The prototype tested at resonant vibration generates 1.15μW of effective power to a 20.4-kΩ resistance load. The potential of this work is to offer miniaturization solutions for power generators, and with the proposed method the ambient ubiquitous vibration can be harvested effectively as endless energy source to form an integrated self-powering system.     

过渡金属钼钒砷杂多化合物的合成与TPR,TPD研究

Seven transition metal molybdovanadoarsenic heteropoly compounds have been synthesized and characterized using IR, UV, TG-DTA, pH potential titration techniques. The molecular formulae of these compounds are pro-posed to be H_xM_yAsMO₁₀V₂O₄₀·zH₂O(x=1～3, y=1,2, M=Cr, Mn, Fe, Co, Ni, Cu, Zn).They are all keggin structure. Surface nature of these compounds have been investigated by temperature programmed desorption and temperature programmed reduction techniques. NH₃-TPD results show that in TPD profiles of the compounds there are two desorption peaks corresponding to weak acid sites of desorption, respectively. Desorbing activativon energy and preexponential factor of weak acid site of desorption for compounds have been calculated. H₂-TPR re-sults show that introducting transtion metal to molybdovanarsenic acid, the reduction peak temperatures of H₂-TPR shift regularly with increasing d electron numbers of transition metals. In addition, Zn and Cu heteropoly com-pounds have yet apparent effect of hydrogen spill over.     

Li^＋／MgO上乙烷氧化脱氢制乙烯的研究（Ⅱ）：催化作用机理

借助ＸＲＤ、ＩＲ、ＴＧ等技术对Ｌｉ＾＋／ＭｇＯ进行了表征，结果表明，酸、碱中心的数目，强度、催化性与Ｌｉ＾＋的添加量相关 ，起酸碱作用的表面金属离子、表面低配位氧集团、Ｏ（Ｌ ｉ＾＋Ｏ＾－）是其反应的活性物种，反应机理可能由离子基、游离基协同完成。     

用ATRP法构筑核壳型梯度极性的多羟基多臂星状超支化聚合物及聚合物刷——双层聚合物刷的合成与表征

设计并通过原子转移自由基聚合方法 (ATRP)合成了核壳型多羟基多臂星状超支化聚合物刷 .以 2 溴异丁基酰溴封端的超支化聚 (3 乙基 3 羟甲基氧杂环丁烷 ) (HP Br)作为大分子引发剂 ,采用Cu(I)Br和N ,N ,N′ ,N′ ,N″ 五甲基二乙基三胺 (PMDETA)催化体系 ,在丁酮与丙醇的混和溶液中 ,通过甲基丙烯酸羟乙酯(HEMA)的ATRP溶液聚合 ,得到了一系列含有大量羟基的多臂星状超支化聚合物刷 (HP g PHEMA) ,并考察了其羟基的活性 ,发现羟基还可以与苯甲酰氯发生反应 .产物的结构和热性能用1 H NMR、FTIR、GPC、TGA、DSC等进行了表征和测试 .     

铜表面腐蚀的激光扫描微区光电压图象的研究

铜表面腐蚀的激光扫描微区光电压图象的研究杨迈之，张雯，蔡生民，任聚杰（北京大学化学系，北京，１０００７１）（河北医学院化学系，石家庄）潘传智，杨勇（浙江工业大学化工系，杭州）（厦门大学化学系，厦门）关键词铜，缓蚀剂，微区光电压图铜的腐蚀与防腐早已引起...