Effect of anions on the phase stability of γ-FeOOH nanoparticles and the magnetic properties of gamma-ferric oxide derived from lepidocrocite

The effect of anions such as Cl⁻, SO₄²⁻, and HPO₄²⁻ on the phase stability of FeOOH (α or γ) during precipitation is investigated. Oxidation of Fe(OH)₂·xH₂O from FeCl₂ solution with high Cl⁻ concentration ([Cl⁻]/[Fe]=R_Cl≥8) or (NH₄)₂Fe(SO₄)₂ (FAS) with [HPO₄²⁻]/[Fe]=R_P≥0.02 yields phase-pure γ-FeOOH. In the medium ranges of R_Cl and R_P, mixed phases of α-FeOOH and γ-FeOOH are obtained. Replacement of OH⁻ by Cl⁻ with the bridging cations or strongly bonded HPO₄²⁻ ions in the matrix of the intermediate phase (Fe_x²⁺Fe_y³⁺(OH)_2x+2y−nz·xH₂O(A)_zⁿ⁻, where A is anions such as Cl⁻, SO₄²⁻, HPO₄²⁻, etc.), promoted the lower density γ-FeOOH. However, the particles are less developed and have poor crystallinity as evidenced from transmission electron microscope and thermogravimetry-differential thermal analysis of the precipitates. Whereas, monophasic, uniformly sized, nano-lath shaped particles with high aspect ratio >10 are obtained when morphology-controlling cation additives such as Pt⁴⁺, Pd²⁺ or Rh³⁺ are present in FeCl₂ (R_Cl≥8) solution. Preferential adsorption of additives on (0k0) and (h00) planes limits the growth in the perpendicular directions leading to high aspect ratios. The effect of these additives are suppressed by the phosphate ion, a strong complexing ligand, giving rise to fibrous aggregate with the length of individual particles as small as 10-30 nm. While most of the Cl⁻ ion is removed from the final precipitates on washing, phosphate remained as HPO₄²⁻ as evidenced from IR absorption spectra. Maghemite obtained by dehydroxylating γ-FeOOH contains randomly distributed micropores bringing in the relaxation effects of spins on the surface atoms as deciphered from Mössbauer spectroscopy. This leads to the low σ_s (44-48 emu/g) and H_c (120-130 Oe) for γ-Fe₂O_3−δ particles. Whereas nearly pore-free single crystalline particles obtained by reduction followed by reoxidation has high value of σ_s (73 emu/g) and H_c (320 Oe), which decreases to 30 emu/g and 75 Oe, respectively, for nanoparticles obtained from phosphate stabilized lepidocrocite. The mobility of iron ions and counter mobility of vacancies during the topotactic transformation of γ-FeOOH to magnetite to γ-Fe₂O_3−δ renders the particles pore-free.     

Graphitic nanofillers in PMMA nanocomposites—An investigation of particle size and dispersion and their influence on nanocomposite properties

Mechanical, thermal, and electrical properties of graphite/PMMA composites have been evaluated as functions of particle size and dispersion of the graphitic nanofiller components via the use of three different graphitic nanofillers: “as received graphite” (ARG), “expanded graphite,” (EG) and “graphite nanoplatelets” (GNPs) EG, a graphitic materials with much lower density than ARG, was prepared from ARG flakes via an acid intercalation and thermal expansion. Subsequent sonication of EG in a liquid yielded GNPs as thin stacks of graphitic platelets with thicknesses of ～10 nm. Solution‐based processing was used to prepare PMMA composites with these three fillers. Dynamic mechanical analysis, thermal analysis, and electrical impedance measurements were carried out on the resulting composites, demonstrating that reduced particle size, high surface area, and increased surface roughness can significantly alter the graphite/polymer interface and enhance the mechanical, thermal, and electrical properties of the polymer matrix. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2097–2112, 2007     

Gas solubility of carbon dioxide in poly(lactic acid) at high pressures: Thermal treatment effect

The sorption of carbon dioxide in glassy Poly(lactic acid) (PLA) films was studied by quartz crystal microbalance (QCM) at high pressures. Two thermal treatments, melted and quenched, were performed in PLA with two different L:D contents, 80:20 and 98:2, films and compared with a third thermal protocol, annealed, and used in a previous work. The results obtained show that for pressures higher than 2 MPa, the carbon dioxide solubility is larger in PLA 80:20 than in PLA 98:2, indicating that the L:D plays a dominant role on this property. The thermal treatments only affect the gas solubility in PLA 98:2. Sorption isotherms at temperatures 303, 313, and 323 K, below the glass transition temperature of the polymer, and pressures up to 5 MPa were measured and analyzed with three different models, the dual‐mode sorption model, the Flory–Huggins equation, and a modified dual‐mode sorption model where the Henry's law term was substituted by the Flory–Huggins equation. This last model performs especially well for CO₂ in PLA 80:20, due to the convex upward curvature of the solubility isotherms for that system. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 616–625, 2007     

Spectral Properties of Thioflavin T and Its Complexes with Amyloid Fibrils

Comparative analysis of the absorption and fluorescence spectra and fluorescence excitation spectra of thioflavin T (ThT) in various solvents and in the composition of amyloid fibrils has shown that ThT, when excited in the region of the long-wavelength absorption band, fluoresces in the spectral region with a maximum at 478–484 nm. The appearance in aqueous and alcohol solutions of a fluorescence band with a maximum near 440 nm has been attributed to the presence in the composition of the ThT preparations of an impurity with an absorption band in the 340–350-nm range. The literature data showing that in glycerol ThT has a wide fluorescence spectrum with two maxima are due to the artifact connected with the use of a high concentration of the dye. It has been suggested that the cause of the low quantum yield of ThT aqueous and alcohol solutions is the breakage of the system of conjugated bonds due to the reorientation of the benzothiozole and benzaminic rings of ThT in the excited state with respect to one another. The main factor determining the high quantum yield of fluorescence of ThT incorporated in fibrils is the steric restriction of the rotation of the rings about one another under these conditions. The suggestions made have been verified by the quantum-chemical calculation of the ThT molecule geometry in the ground and excited states.     

Algorithmic Complexity of a Problem of Idempotent Convex Geometry

Properties of the idempotently convex hull of a two-point set in a free semimodule over the idempotent semiring R _{max min} and in a free semimodule over a linearly ordered idempotent semifield are studied. Construction algorithms for this hull are proposed.     

Thermal Effects of Microwave Energy in Agricultural Soil Radiation

The thermal treatment by millimeter waves for the soil disinfection can be one possible alternative to chemical treatments. This physical method is based on incrementing the soil temperature and its pathogens irradiating with high frequency electromagnetic waves. So the previous knowledge of the temperature distribution in the irradiated soil is essential for achieving an effective bad microorganism and weed seeds elimination. This report analyse the heating kinetic and spatial distribution of the maximum temperatures reached by the soil. It is presented a mathematic model about how are distributed the reached temperatures in the depth of the irradiated soil. This model concludes that when an orchard soil is irradiated superficially by microwaves, the microwaves have a big attenuation due to the soil dielectric properties and the water located in the pores of the most superficial layer. This fact causes a shield effect blocking the waves penetration in few centimetres. The heating by radiation is reduced to the superficial layer. The heating propagation in the depth is occurred by conduction following the Fourier equations.     

The probability of generating a soluble subgroup of a finite group

It is proved that for finite groups G, the probability thattwo randomly chosen elements of G generate a soluble subgrouptends to zero as the index of the largest soluble normal subgroupof G tends to infinity.     

High-order harmonic generation with a strong laser field and an attosecond-pulse train: The Dirac-Delta comb and monochromatic limits

In recent publications, it has been shown that high-order harmonic generation can be manipulated by employing a time delayed attosecond-pulse train superposed to a strong, near-infrared laser field. It is an open question, however, which is the most adequate way to approximate the attosecond-pulse train in a semianalytic framework. Employing the strong-field approximation and saddle-point methods, we make a detailed assessment of the spectra obtained by modeling the attosecond-pulse train by either a monochromatic wave or a Dirac-Delta comb. These are the two extreme limits of a real train, which is composed by a finite set of harmonics. Specifically, in the monochromatic limit, we find the downhill and uphill sets of orbits reported in the literature, and analyze their influence on the high-harmonic spectra. We show that, in principle, the downhill trajectories lead to stronger harmonics, and pronounced enhancements in the low plateau region. These features are analyzed in terms of quantum interference effects between pairs of quantum orbits, and compared to those obtained in the Dirac-Delta limit.     

Roughness reduction in submicron waveguides by low-molecular weight development

Roughness reduction of a submicron waveguide profile in chemically amplified negative resist is here performed by proper selection of an alkali-based developer, taking into account that its smaller molecules lead to smoother resist surface by altering the developing mechanism of aggregate extraction performed with standard quaternary ammonium hydroxide. Roughness is then analyzed by means of classical Atomic Force Microscope inspection; furthermore, a non-invasive line edge roughness analysis approach based on top-down scanning electron microscope acquisition gives comparable results, in terms of standard deviation and molecular aggregate periodicity.     

Polarization dynamics of longitudinally monomode bipolarized microchip solid-state lasers

This paper is devoted to the polarization dynamics of a longitudinally monomode bipolarized Nd:YAG laser: the low-frequency polarization dynamics of a microchip laser is studied experimentally and theoretically. The intensities and the relaxation oscillation spectrum of orthogonally polarized modes versus the direction of pump polarization is observed. A phase-sensitive model of a longitudinally monomode bipolarized solid-state laser with linear polarized diode laser pump is developed to account for the experimental observations.