Antimony speciation by inductively coupled plasma mass spectrometry using solid phase extraction cartridges

A novel and simple method for inorganic antimony speciation is described based on selective solid phase extraction (SPE) separation of antimony(III) and highly sensitive inductively coupled plasma mass spectrometric (ICP-MS) detection of total antimony and antimony(V) in the aqueous phase of the sample. Non-polar SPE cartridges, such as the Isolute silica-based octyl (C8) sorbent-containing cartridge, selectively retained the Sb(III) complex with ammonium pyrrolidine dithiocarbamate (APDC), while the uncomplexed Sb(V) remained as a free species in the solution and passed through the cartridge. The Sb(III) concentration was calculated as the difference between total antimony and Sb(V) concentrations. The detection limit was 1 ng L(-1) antimony. Factors affecting the separation and detection of antimony species were investigated. Acidification of samples led to partial or complete retention of Sb(V) on C8 cartridge. Foreign ions tending to complex with Sb(III) or APDC did not interfere with the retention behavior of the Sb(III)-APDC complex. This method has been successfully applied to antimony speciation of various types of water samples.     

工业上电解应用的简单实验

金属的电解制取由铜的含氧矿物(孔雀綠、氧化铜及氧化亚铜等)制取铜的原理,在学校里很容易演示。在一含有10％硫酸溶液的烧杯中,投入研碎的矿粉,加热直至得到淡颜色的硫酸铜溶液。将所得溶液用过濾法使与沉淀分离,然后把溶液电解,铜即沉积于炭的阴电极上。由熔融鹽制取金属的原理,最好用电解氯化锌为例说明。为了熔化氯化锌,可应用容积30毫升的铁坩埚。演示实验时,可盛结晶氯化锌至坩埚的大约一半地方,放在酒精灯或煤气灯上加热,经2-3分鐘,氯化锌即熔融(t=313℃),继续加热,在熔融鹽中浸入两根     

A fibrous hypercrosslinked sorbent prepared on PP-ST-DVB matrix via post-crosslinking reaction

A fibrous sorbent possessing abundant micropore structure was firstly prepared via post-crosslinking reaction on the PP-ST-DVB original fiber. Its micromorphology and sorptive properties were investigated, and the results demonstrated that the novel fibrous hypererosslinked sorbent has narrow pore-size distribution, small average porous radius （1.90 nm）, high specific surface area （362.31 m^2/g）, and fine sorptive properties for small organic molecules.     

Screening,library-assisted identification and validated quantification of fifteen neuroleptics and three of their metabolites in plasma by liquid chromatography/mass spectrometry with atmospheric pressure chemical ionization

A liquid chromatographic/mass spectrometric assay with atmospheric pressure chemical ionization (APCI-LC/MS) is presented for the fast and reliable screening and identification and for the precise and sensitive quantification of 15 neuroleptic (antipsychotic) drugs and three of their relevant metabolites in plasma. It allows confirmation of the diagnosis of a neuroleptic overdose and monitoring of psychiatric patients' compliance. The neuroleptics amisulpride, bromperidol, clozapine, droperidol, flupenthixol, fluphenazine, haloperidol, melperone, olanzapine, perazine, pimozide, risperidone, sulpiride, zotepine and zuclopenthixol and the pharmacologically active metabolites norclozapine, clozapine N-oxide and 9-hydroxyrisperidone were extracted from plasma using solid-phase extraction and were separated on a Merck LiChroCART column with Superspher 60 RP Select B as the stationary phase. Gradient elution was performed using aqueous ammonium formate and acetonitrile. After screening and identification in the scan mode using the authors' new LC/MS library, the neuroleptics were quantified in the selected-ion mode. The quantification assay was fully validated. It was found to be selective and proved to be linear from sub-therapeutic to over therapeutic concentrations for all analytes. The corresponding reference levels are listed. The accuracy and precision data were within the required limits. The analytes were stable in frozen plasma for at least 1 month. The method was successfully applied to several authentic plasma samples from patients treated or intoxicated with various neuroleptics. The validated LC/MS assay has proved to be appropriate for the isolation, separation, screening, identification and quantification of various neuroleptics in plasma for clinical toxicology and therapeutic drug monitoring purposes.     

Stereoselective association of binuclear metallacycles in coordination polymers

A series of structurally related binuclear metallacycles [Cd(NO(3))(2)L](2), where L is an angular exo-bidentate ligand, have been synthesized. Each metallacycle contains two coordinatively unsaturated, chiral metal centers within a single molecule, and the assembly of these metallacycles into polymeric framework structures has been studied systematically for the first time. Stereoselective homochiral association of [Cd(NO(3))(2)L](2) leads to the formation of helical coordination polymers, whereas meso type association results in nonhelical chain structures. The type of stereoselective aggregation depends on the conditions of self-assembly as well as on ligand functionality. Both helical and nonhelical polymeric complexes have been isolated for the metallacycle [Cd(NO(3))(2)(2,4'-pyacph)](2) (2,4'-pyacph = 2,4'-(4-ethynylphenyl)bipyridyl). Homochiral association results in the formation of helical [Cd(NO(3))]( infinity ) chains which link the binuclear [Cd(NO(3))(2)(2,4'-pyacph)](2) metallacycles into racemic two-dimensional sheets which contain both P and M [Cd(NO(3))]( infinity ) helices. In contrast, meso-association leads to the formation of nonhelical one-dimensional chains. It is shown that the product of homochiral association is predominately formed at room temperature and that of meso-association is generated at elevated temperatures. Thus, it may be concluded that the homochiral association appears to be energetically less favorable than the meso-association, a conclusion that has been confirmed by theoretical calculations of the crystal lattice energy. Several high-yield syntheses of bipyridyl-type ligands used for metallacyclic assembly are also reported.     

Covalent chemistry and conformational dynamics of topologically chiral amide-based molecular knots

The readily available in gram quantities tris(allyloxy)knot of the amide-type 5 (knotane) can be completely and partially deprotected with nBu(3)SnH in the presence of a palladium catalyst resulting in hydroxyknotanes 7-9. These, in turn, react with diethylchlorophosphate giving rise to knotanes equipped with between one and three phosphoryl groups. Sulfonylation of bis(allyloxy)monohydroxyknotane 8 with p-toluenesulfonyl chloride and, following removal of one or two allyl groups from the intermediate monosulfonate 13, give rise to sulfonyloxy-allyloxy-hydroxy- and sulfonyloxy-dihydroxy-knotanes 15 and 14, respectively. This provides a convenient method for the preparation of knotanes with any substitution pattern. All new knotanes have been isolated in preparative amounts and as highly pure substances with an exception of allyloxy-dihydroxyknotane 9. This compound could only be obtained as a mixture with the corresponding monohydroxy-derivative 8. The structures of all synthesized compounds were established by means of FAB and MALDI TOF mass spectrometry, (1)H and (31)P NMR spectroscopy. The triphosphorylated knotane 10 exhibits high solubility in alcohols, allowing its complete enantiomeric resolution with a commercially available chiral HPLC column. (1)H,(1)H DQF-COSY correlation spectroscopy along with H/D exchange experiments and ab initio calculations provided the first detailed (1)H NMR signal assignments of knotanes in [D(6)]DMSO solution. The combination of variable temperature (1)H and (31)P NMR spectroscopy and molecular modeling has been applied to study the conformational behavior of the new knotanes in different solvents. It has been shown that in DMSO solution at room temperature knotanes exist in a relatively rigid nonsymmetrical conformation similar to that found in the solid state while faster conformational exchange leading to the average D(3) symmetrical structure was detected in a number of other solvents.     

Enantioselective synthesis of marine indole alkaloid hamacanthin B

An enantioselective total synthesis of hamacanthin B (1) is described. This synthesis is based on the asymmetric synthesis of (S)-2-azido-(indol-3-yl)ethylamine 7, which is coupled with the 3-indolyl-alpha-oxoacetyl chloride 8 and subsequently used in a successful intramolecular Staudinger-aza Wittig cyclization to form the central dihydropyrazinone ring. The stereochemistry of naturally isolated hamacanthin B is revealed as the (S)-configuration.     

Characterisation and determination of indole alkaloids in frog-skin secretions by electrospray ionisation ion trap mass spectrometry

The characterisation of selected indole alkaloids in a quadrupole ion trap mass spectrometer is presented. Fragmentation profiles for tryptamine, 5-hydroxytryptamine (5-HT), N'-methyl 5-hydroxytryptamine (N'-methyl 5-HT), N',N'-dimethyl 5-hydroxytryptamine (bufotenine), N',N',N'-trimethyl 5-hydroxytryptamine (5-HTQ), and N',N'-dimethyl 5-methoxytryptamine (5-MeODMT) are presented with proposed structures given for each product ion observed. Such MS(n) experiments can be used to differentiate the isobaric molecular ions of the compounds 5-HTQ (M(+)) and 5-MeODMT (MH(+)). The quantitative determination of certain indole alkaloids in the skin secretions of the Australian Golden Bell frog, Litoria aurea, by LC/ESI-ion trap MS is also presented. The concentrations of 5-HT, N'-methyl 5-HT and 5-HTQ were found to be 2.68, 0.26 and 0.54 microg per mg of skin secretion, respectively.