Separation and preconcentration of ultratrace lead in biological organisms and its determination by graphite furnace atomic absorption spectrometry

A biological organism (chitosan) was utilized to preconcentrate lead ions from tap water. This preconcentration was achieved by mixing 0.8 ml of chitosan slurry with 10-50 ml of lead-containing solution and subsequently separating by centrifugation. The chitosan paste was then dissolved in 1 ml of 0.2% nitric acid and analysed by graphite furnace atomic absorption spectrometry. The extraction efficiency can approach 100% in the pH range 4-10. The amount of chitosan used was not critical. The effect of some impurities was also investigated. If six samples were prepared simultaneously, the time needed to preconcentrate each sample was less than 3 min. Two different modes of standard addition (the standard lead solutions being added before and after preconcentration) were used for analysis of tap water samples, and the results obtained by the two modes were found to be quite consistent.     

Experimental (NMR) and Computational (MD) Studies on the Inclusion Complexes of 1-Bromoadamantane with alpha-, beta-, and gamma-Cyclodextrin

The inclusion complexes between the most commonly used cyclodextrins (alpha-, beta-, and gamma-CD) and 1-bromoadamantane were prepared and studied experimentally by NMR methods and by molecular dynamics simulations (AMBER force field) with solvation. The NMR results suggest host/guest ratios of 2:1, 1:1, and 1:1 for the complexes with alpha-, beta-, and gamma-cyclodextrin, respectively, as well as defined geometries for the complexes. Averaged geometrical data from the molecular dynamics simulations agree with the complexation geometries deduced experimentally.     

Rheology of a lyotropic mesophase through a stress-relaxation experiment

We report on the first rheological study of the structural relaxations in a nematic liquid crystalline phase. Linear dynamic and transient shear experiments were applied to a polydomain nematic phase of the CTAB/water system: a liquid crystalline mixture composed of 28 wt% CTAB at 35 degrees C. The decay of the shear modulus, G(t), was analyzed using the CONTIN inverse Laplace transform to obtain a distribution of relaxation times which were compared with ones from the usual fitting procedure based on a generalized Maxwell model. The behavior of the nematic lyotropic structure of the CTAB/water system is characterized by the presence of both slow and fast relaxation times. These were interpreted as being due to a progressive loss of the lyotropic domain orientation and to the breaking/reforming process of the cylindrical aggregates, respectively.     

Chemical solution-deposited PbZr 0.53 Ti 0.47 O3 on La 0.5 Sr 0.5 Co O3. SIMS investigation of the effect of different precursor additives on the layer structure

Chemical solution-deposited thin films of PbZr(0.53)Ti(0.47)O(3)/La(0.5)Sr(0.5)CoO(3) on Pt/TiO(2)/SiO(2)/Si substrates have been investigated by dynamic SIMS. The PbZr(0.53)Ti(0.47)O(3) (PZT) is intended to serve as a ferroelectric layer for microelectronic or microelectromechanical applications; conducting La(0.5)Sr(0.5)CoO(3) (LSCO) is a buffer layer intended to eliminate fatigue effects which usually occur at the Pt/PZT interface. Depth profiles of the main components were obtained and revealed that significant diffusion occurred during the deposition and crystallisation processes. Two types of sample, with different thickness of PZT and different types of poly(vinyl alcohol) (PVA) added to the LSCO precursor, were investigated.     

Characterization of laser-irradiated YNi 2 B 2 C surfaces by Auger electron spectroscopy

The suitability of laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) for precise analysis of YNi(2)B(2)C has been investigated. The intensity ratios B/Y and Ni/Y were found to vary during ablation as a function of the ablation conditions. This could be because of fractionation, owing to incongruent ablation or transport and plasma effects. The bottoms and surroundings of the craters were investigated by scanning Auger electron spectrometry. The bottoms of the craters produced by ablation are covered with a thin oxide comparable with that on the polished crystal surface.The craters are surrounded by an oxide layer the dimensions and thickness of which depend on the laser conditions. The formation of this oxide can be assumed to be a result of partial oxidation of sample material during the ablation process; the oxide is then redeposited around the laser crater.     

An insight into the aromaticity of fullerene anions: experimental evidence for diamagnetic ring currents in the five-membered rings of C(60)(6-) and C(70)(6-)

Reduction of the two "closed" [6,6] methanofullerenes, [6,6]C(61)H(2) (1) and [6,6]C(71)H(2) (5), to the corresponding hexaanions with lithium metal causes the bridgehead-bridgehead bonds to open, at least partially, and this change gives rise to diamagnetic ring currents in the resulting homoconjugated six-membered rings (6-MRs). These new ring currents shield the overlying hydrogen atoms on the methylene bridge and induce upfield shifts of 1.60 and 0.11 ppm in their (1)H NMR resonances, respectively. Analogous reduction of the already "open" [5,6]methanofullerenes, [5,6]C(61)H(2) (2) and [5,6]C(71)H(2) (3 and 4), only slightly enhances the shielding of the hydrogen atoms over the homoconjugated 6-MRs (upfield shifts of 0.13, 0.68, and 0.14 ppm, respectively) but leads to exceptionally strong diamagnetic ring currents in the homoconjugated five- membered rings (5-MRs), as evidenced by dramatic shielding of the hydrogen atoms situated over them (upfield shift of 5.01, 6.78, and 1.63 ppm, respectively). The strongest shielding is seen for the hydrogen atom sitting over the 5-MR at the pole of C(71)H(2)(6)(-) (delta = -0.255 ppm) indicating that the excess charge density is concentrated at the poles.     

Synthesis of enantiomerically enriched allenes by (-)-sparteine-mediated lithiation of alkynyl carbamates

[reaction: see text]. The alpha-deprotonation of alkynyl carbamates 3 with the chiral base (-)-sparteine (4)/n-butyllithium, transmetalation with ClTi(O(i)()Pr)3, and subsequent substitution with an aldehyde results in the formation of enantioenriched 4-hydroxyallenyl carbamates 11. Stereoselection is determined by dynamic resolution of the lithium/(-)-sparteine complexes by selective crystallization.     

GIAO/DFT evaluation of 13C NMR chemical shifts of selected acetals based on DFT optimized geometries

DFT/B3LYP calculations of the ground-state conformation of eight cyclic and acyclic acetals are presented and compared with experimental data. Results of single-point GIAO/DFT calculations at five different levels of theory show that isotropic shieldings need to be empirically scaled to achieve agreement with experimental chemical shifts. Statistical evaluation of data indicates that the most accurate prediction of 13C chemical shifts is achieved at the MPW1PW91/6-311G** level of theory. An empirical equation describing the relationship between delta values and shielding constants is postulated. This equation has been applied to the non-chair ground-state conformation of the six-membered acetonide and to the conformationally flexible benzodioxonine derivative. The agreement observed between the experimental and predicted chemical shifts shows that calculations at the MPW1PW91/6-311G** level of theory are adequate for addressing questions of conformation.     

Olive mill wastewater treatment by a pilot-scale subsurface horizontal flow (SSF-h) constructed wetland

Performances of a pilot-scale reed bed for the olive mill wastewater (OMW) treatment were investigated, by monitoring influent and effluent pH, total suspended solids (TSS), chemical oxygen demand (COD), total Kjeldahl nitrogen (TKN), total phosphorus and polyphenols. In order to reduce the suspended matter concentration and to avoid clogging, OMW was pre-treated by adding lime putty, calcium hydroxide and hydraulic lime. The best results were obtained with 2 g/L of hydraulic lime. Pre-treated OMW was dosed in the reed bed at dilution ratios of 1/3 and 1/10 (v/v), pointing up that the latter only did not give rise to reed suffering and allowed to obtain good and durable removal efficiencies, above all for COD (74.1+/-17.6%) and polyphenols (83.4+/-17.8%). Recycling of the effluent was quite effective for the improvement of the wastewater quality, allowing a further removal of 26-70%, depending on the parameter taken into account. A post-dosage study, carried out by feeding the reed bed with the effluent of an activated sludge plant, pointed up a rapid decreasing of the outlet concentrations of the investigated parameters to values compatible with Italian regulations concerning wastewater discharge in surface water. Polyphenols were the exception, being their outlet concentration at the end of post-dosage study around 2 mg/L.     

The complex of a bivalent derivative of galanthamine with torpedo acetylcholinesterase displays drastic deformation of the active-site gorge: implications for structure-based drug design

Bifunctional derivatives of the alkaloid galanthamine, designed to interact with both the active site of the enzyme acetylcholinesterase (AChE) and its peripheral cation binding site, have been assayed with Torpedo californica AChE (TcAChE), and the three-dimensional structures of their complexes with the enzyme have been solved by X-ray crystallography. Differences were noted between the IC(50) values obtained for TcAChE and those for Electrophorus electricus AChE. These differences are ascribed to sequence differences in one or two residues lining the active-site gorge of the enzyme. The binding of one of the inhibitors disrupts the native conformation of one wall of the gorge, formed by the loop Trp279-Phe290. It is proposed that flexibility of this loop may permit the binding of inhibitors such as galanthamine, which are too bulky to penetrate the narrow neck of the gorge formed by Tyr121 and Phe330 as seen in the crystal structure.