On the retrograde condensation of one or two liquids

This contribution discusses the phenomena of retrograde condensation of one or two liquids. It w1 be shown that both phenomena can be well understood. Also the relation of retrograde condensation of one liquid phase with the condensation behavior of natural gas will be discussed. Similarly that of two liquid phases with multiple phase behavior occurring in low temperature reservoir fluids will be pointed out.     

Kinetic study of n-heptane oxidation

The oxidation of n-heptane has been studied in a jet-stirred flow reactor in the temperature range 950–1200 K at atmospheric pressure for a wide range of fuel-oxygen equivalence ratios (0.2 to 2.0). A chemical kinetic reaction mechanism developed from previous studies on smaller hydrocarbons and extended to C₆ and C₇ species was used to reproduce the experimental data. Good agreement between computed and measured concentrations of major chemical species was obtained for the entire range of experimental conditions. Sensitivity analyses were carried out to identify the reactions having the greatest influence on the modeling results. The major reaction paths for n-heptane consumption and for the formation of the main products have been identified. In addition n-heptane ignition delays behind a reflected shock wave measured by other investigators were used to validate the present reaction mechanism at higher temperature and pressure.     

Temperature dependence of the rate constants for reactions of the carbonate radical with organic and inorganic reductants

Rate constants have been measured by pulse radiolysis for the reactions of the carbonate radical, CO₃^·?, with a number of organic and inorganic reactants as a function of temperature, generally over the range 5 to 80°C. The reactants include the substitution-inert cyano complexes of Fe^II, Mo^IV, and W^IV, the simple inorganic anions SO₃^2?, ClO₂^?, NO₂^?, I^?, and SCN^?, several phenolates, ascorbate, tryptophan, cysteine, cystine, methionine, triethylamine, and allyl alcohol. The measured rate constants ranged from less than 10⁵ to 3 × 10⁹ M^?1 s^?1, the activation energies ranged from ?11.4 to 18.8 kJ mol^?1, and the pre-exponential factors ranged from log A = 6.4 to 10.7. The activation energies for the metal complexes and inorganic anions generally decrease with increasing driving force for the reaction, as expected for an outer sphere electron transfer. For highly exothermic reactions, however, the activation energy appears to increase, probably reflecting the temperature dependence of diffusion. For many of the organic reactants, the activation energies were low and independent of driving force, suggesting that the oxidation is via an inner sphere mechanism.     

Subchronic oral toxicity (six months) of carboxyethylgermanium sesquioxide [(HOOCCH2CH2Ge)2O3]n in rats

After briefly renewing toxicological data on germanium compounds, the authors report on the subchronic oral toxicity of carboxyethylgermanium sesquioxide in rats. During six months, male and female animals received 1 g kg^?1. day^?1. No particular toxic symptoms, and no behaviour problems except a small decrease of body weight in male rats, at the end of the six-month experimentation period, were observed. A significant decrease of erythropoiesis and some significant changes in leucocyte ratios were demonstrated. The main marked effect was a moderate renal dysfunction characterized by a tubular disease with the presence of cylinders, swelling of tubulus cells and flocculus deposits. Germanium urinary excretion was constant and linked to the received dose. Six months later, no preferential accumulation in organs was evident.     

Determination of tributyltin oxide in coastal marine sediments and mussels by electrothermal atomic absorption spectrometry

We have devised a new method for bis(tributyltin)oxide (TBTO) determination in marine sediments and mussels. This technique involves an n-hexane/methylene chloride mixture extraction and extract purification with a sodium hydroxide wash in order to eliminate interfering compounds. TBTO is then extracted again by nitric acid and converted into an inorganic tin species; the analysis has been effected using Zeeman graphite furnace-atomic absorption spectrophotometry. The method detection limit for the matrices examined is 0.004 μg TBTO g^?1 (wet weight) and is sufficient for the analysis in real samples. The percentage recovery of TBTO from sediments and mussels samples is higher than 85% and 95% respectively. This method has been applied to TBTO level determination in sediments and mussels (Mytilus galloprovincialis) sampled in the harbour area in Taranto, where mussel culture activities are much developed; the TBTO levels obtained in sediments and mussels were in the range 15-47 ng g^?1 (wet weight) and 11-30 ng g^?1 (wet weight) respectively. Such values are comparable with those found in other harbour areas in the Mediterranean Sea.     

Study on reproductive endocrinology of human placenta (III)--Hormonal regulation of progesterone production by trophoblast tissue of first trimester.

The effect of hormones on progesterone secretion by 6-8 week human trophoblast tissue cultured in serum-free medium has been investigated. GnRH at low concentration (10(-10)-10(-8) mol/L) stimulated progesterone secretion, while high dose (10(-6)-10(-5) mol/L) produced inhibitory effect. The progesterone secretion could be significantly decreased by addition of anti-hCG antiserum or monoclonal anti-hCG IgG in a dose- and time-dependent manner. Various concentrations of TRH, PGE2, PGF2 alpha, testosterone and estradiol were found to be ineffective. These data indicate clearly that progesterone production by human trophoblast tissue at early gestation stage is under the modulation of GnRH and hCG.     

Radical copolymerization of 2‐trifluoromethylacrylic monomers. II. Kinetics,monomer reactivities,and penultimate effect in their copolymerization with norbornenes and vinyl ethers

Radical copolymerizations of electron‐deficient 2‐trifluoromethylacrylic (TFMA) monomers, such as 2‐trifluoromethylacrylic acid and t‐butyl 2‐trifluoromethylacrylate (TBTFMA), with electron‐rich norbornene derivatives and vinyl ethers with 2,2′‐azobisisobutyronitrile as the initiator were investigated in detail through the analysis of the kinetics in situ with ¹H NMR and through the determination of the monomer reactivity ratios. The norbornene derivatives used in this study included bicyclo[2.2.1]hept‐2‐ene (norbornene) and 5‐(2‐trifluoromethyl‐1,1,1‐trifluoro‐2‐hydroxylpropyl)‐2‐norbornene. The vinyl ether monomers were ethyl vinyl ether, t‐butyl vinyl ether, and 3,4‐dihydro‐2‐H‐pyran. Vinylene carbonate was found to copolymerize with TBTFMA. Although none of the monomers underwent radical homopolymerization under normal conditions, they copolymerized readily, producing a copolymer containing 60–70 mol % TFMA. The copolymerization of the TFMA monomer with norbornenes and vinyl ethers deviated from the terminal model and could be described by the penultimate model. The copolymers of TFMA reported in this article were evaluated as chemical amplification resist polymers for the emerging field of 157‐nm lithography. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1478–1505, 2004     

Influence of preparation methods on structure and properties of PA6/PA66 blends: A comparison of melt‐mixing and in situ blending

The blends composed of polyamide 6 (PA6) and polyamide 66 (PA66) were obtained using two different preparation methods, one of which was the melt‐mixing through a twin‐screw extruder and the subsequent injection molding; and the other, the in situ blending through anionic polymerization of ε‐caprolactam in the presence of PA66. For the former, there existed a remarkable improvement in toughness but a drastic drop in strength and modulus; however, for the latter, a reverse but less significant trend of mechanical properties change appeared. Various characterizations were conducted, including the analyses of crystalline morphology, crystallographic form, and crystallization and melting behaviors using polarized optical microscopy (POM), wide‐angle X‐ray diffraction (WAXD), and differential scanning calorimetry (DSC), respectively; observation of morphology of fractured surface with scanning electron microscope (SEM); measurement of glass transition through dynamic mechanical analysis (DMA); and the intermolecular interaction as well as the interchange reaction between the two components by Fourier transform infrared spectrometry (FT‐IR) and ¹³C solution NMR. The presence and absence of interchange reaction was verified for the in situ and melt‐mixed blends, respectively. It is believed that the transreaction resulted in a drop in glass transition temperature (T_g) for the in situ blends, contrary to an increase of T_g with increasing PA66 content for the melt‐mixed ones. And the two kinds of fabrication methods led to significant differences in the crystallographic form, spherulite size and crystalline content and perfection as well. Accordingly, it is attempted to explain the reasons for the opposite trends of changes in the mechanical properties for these two blends. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1176–1186, 2007