Layered lithium-rich oxide nanoparticles: low-temperature synthesis in mixed molten salt and excellent performance as cathode of lithium-ion battery

Layered lithium-rich oxide, 0.5Li₂MnO₃·0.5LiMn_1/3Ni_1/3Co_1/3O₂, is synthesized in a mixed molten salt of KCl and LiCl under 750 °C. Its morphology and structure are characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and nitrogen adsorption and desorption isotherm, and its performances as cathode of lithium-ion battery are investigated by charge–discharge test and electrochemical impedance spectroscopy, with a comparison of the samples synthesized via solid-state reaction. It is found that the resulting product consists of uniform nanoparticles, 50 nm in average, which possesses a well crystallite layered structure although its synthesis temperature is low and thus exhibits excellent cyclic stability and rate capability. The resulting product delivers an initial discharge capacity of 268 mAh g^?1 at 0.1 C and has a capacity retention of 82% after 100 cycles at 1 C, compared to the 243 mAh g^?1 and 73% for the sample synthesized by solid-state reaction under 900 °C.     

Complex dynamics of a particle in an oscillating potential field

In this paper, Mg-doped ZnO nanoparticles were synthesized by the facile sol–gel method. The crystalline structure, characteristic absorption bands and morphology of the obtained Mg-doped ZnO nanoparticles were studied by XRD, FTIR and TEM. The thermal degradation behaviour of the samples was investigated by differential scanning calorimetry (DSC) and thermogravimetry (TG). The effect of Mg concentrations and annealing temperatures on the antibacterial properties of the obtained nanoparticles was investigated in detail. The results indicated that doping Mg ions into ZnO lattice could enhance its antibacterial activity. Antibacterial assay demonstrated that Mg-doped ZnO with 7% Mg content annealed at 400 ^°C had the strongest antibacterial activity against Listeria monocytogenes (98.7%). This study indicated that the inhibition rate of ZnO nanoparticles increased with the formation of granular structure and the decrease of ZnO size due to the doping of Mg ions into the ZnO lattice.     

Nanoflare heating model for collisionless solar corona

The problem of coronal heating remains one of the greatest unresolved problems in space science. Magnetic reconnection plays a significant role in heating the solar corona. When two oppositely directed magnetic fields come closer to form a current sheet, the current density of the plasma increases due to which magnetic reconnection and conversion of magnetic energy into thermal energy takes place. The present paper deals with a model for reconnection occurring in the solar corona under steady state in collisionless regime. The model predicts that reconnection time in the solar corona varies inversely with the cube of magnetic field and varies directly with the Lindquist number. Our analysis shows that reconnections are occurring within a time interval of 600 s in the solar corona, producing nanoflares in the energy range 10 ²¹–10 ²³ erg /s which matches with Yohkoh X-ray observations.     

Exploring a hidden fermionic dark sector

In this paper, we present a generalized unified method for finding multiwave solutions of the time-fractional (2+1)-dimensional Nizhnik–Novikov–Veselov equations. The fractional derivatives are described in the modified Riemann–Liouville sense. The fractional complex transform has been suggested to convert fractional-order differential equations with modified Riemann–Liouville derivatives into integer-order differential equations, and the reduced equations can be solved by symbolic computation. Multiauxiliary equations have been introduced in this method to obtain not only multisoliton solutions but also multiperiodic or multielliptic solutions. It is shown that the considered method is very effective and convenient for solving wide classes of nonlinear partial differential equations of fractional order.     

Time-delayed chameleon: Analysis,synchronization and FPGA implementation

In this paper we report a time-delayed chameleon-like chaotic system which can belong to different families of chaotic attractors depending on the choices of parameters. Such a characteristic of self-excited and hidden chaotic flows in a simple 3D system with time delay has not been reported earlier. Dynamic analysis of the proposed time-delayed systems are analysed in time-delay space and parameter space. A novel adaptive modified functional projective lag synchronization algorithm is derived for synchronizing identical time-delayed chameleon systems with uncertain parameters. The proposed time-delayed systems and the synchronization algorithm with controllers and parameter estimates are then implemented in FPGA using hardware–software co-simulation and the results are presented.     

Extended Holomorphic Anomaly in Gauge Theory

The partition function of an N=2{\mathcal {N}=2} gauge theory in the Ω-background satisfies, for generic value of the parameter b = -e₁/e₂{\beta=-{\epsilon_1}/{\epsilon_2}} , the, in general extended, but otherwise β-independent, holomorphic anomaly equation of special geometry. Modularity together with the (β-dependent) gap structure at the various singular loci in the moduli space completely fixes the holomorphic ambiguity, also when the extension is non-trivial. In some cases, the theory at the orbifold radius, corresponding to β = 2, can be identified with an “orientifold” of the theory at β = 1. The various connections give hints for embedding the structure into the topological string.     

Detection of nanoparticles in edible plant tissues exposed to nano-copper using single-particle ICP-MS

The increasing use of nanopesticides has raised concerns about their effects on crop plants and the impact of human health as well as ecological effects. While increased uptake of metal ions has been observed before, to date, very few studies have demonstrated the presence of nanoparticles in edible tissues. Single-particle inductively coupled plasma–mass spectrometry (sp-ICP-MS) has been suggested as a powerful tool to detect inorganic nanoparticles (NPs) in environmental samples. Here, we exposed edible plant tissues from lettuce, kale, and collard green to nano-CuO, simulating its use as a nanopesticide. We applied sp-ICP-MS to demonstrate the presence of nanoparticles, both in the water used to rinse crop leaf surfaces exposed to nano-CuO and within the leaf tissues. Lettuces retained the highest amounts of nCuO NPs on the leaf surface, followed by collard green and then kale. Surface hydrophilicity and roughness of the leaf surfaces played an important role in retaining nano-CuO. The results indicate that most of the nanoparticles are removed via washing, but that a certain fraction is taken up by the leaves and can result in human exposure, albeit at low levels.

Open image in new window

Graphical abstract ?

     

One-step hydrothermal synthesis of feather duster-like NiS@MoS<Subscript>2</Subscript> with hierarchical array structure for the Pt-free dye-sensitized solar cell

Novel feather duster-like nickel sulfide (NiS) @ molybdenum sulfide (MoS₂) with hierarchical array structure is synthesized via a simple one-step hydrothermal method, in which a major structure of rod-like NiS in the center and a secondary structure of MoS₂ nanosheets with a thickness of about 15–55 nm on the surface. The feather duster-like NiS@MoS₂ is employed as the counter electrode (CE) material for the dye-sensitized solar cell (DSSC), which exhibits superior electrocatalytic activity due to its feather duster-like hierarchical array structure can not only support the fast electron transfer and electrolyte diffusion channels, but also can provide high specific surface area (238.19 m² g^?1) with abundant active catalytic sites and large electron injection efficiency from CE to electrolyte. The DSSC based on the NiS@MoS₂ CE achieves a competitive photoelectric conversion efficiency of 8.58%, which is higher than that of the NiS (7.13%), MoS₂ (7.33%), and Pt (8.16%) CEs under the same conditions.

Open image in new window

Graphical abstract Novel feather duster-like NiS@MoS₂ hierarchical structure array with superior electrocatalytic activity was fabricated by a simple one-step hydrothermal method.

     

Effect of alkyl chain lengths on the assemblies of magnetic nanoparticles coated with multi-functional thiolactone-containing copolymer

This work presents the synthesis of magnetite nanoparticle (MNP) coated with poly(N,N-diethylaminoethyl methacrylate)-b-poly(N-isopropyl acrylamide-st-thiolactone acrylamide) (PDEAEMA-b-P(NIPAAm-st-TlaAm) copolymer and its use in controlled drug release and bio-conjugation. TlaAm units in the copolymer were ring-opened with various alkyl amines to form thiol groups (-SH), followed by thiol-ene coupling reactions with acrylamide-coated MNP and then quaternized to obtain cationic copolymer-MNP assemblies (the size <?200 nm/cluster). The use of alkyl amines having various chain lengths (e.g., 1-propylamine, 1-octylamine, or 1-dodecylamine) in the nucleophilic ring-opening reactions of the thiolactone rings affected their magnetic separation ability, water dispersibility, and release rate of doxorubicin model drug. In all cases, when increasing the temperature, they showed a thermo-responsive behavior as indicated by the decrease in hydrodynamic size and the accelerated drug release rate. These copolymer-MNP assemblies could be used as a novel platform with thermal-triggering controlled drug release and capability for adsorption with any negatively charged biomolecules.

Open image in new window

Graphical abstract MNP coated with multi-functional PDEAEMA-b-P(NIPAAm-st-TlaAm) copolymer and its proposed drug release

     

Nondestructive interface construction for CdS-buffered ZnO nanorod/Cu<Subscript>2</Subscript>O composite structure solar cells

In this work, ZnO nanorod/Cu₂O composite nanostructure solar cells were prepared using hydrothermal growth and electrodeposition. The CdS layer was added between ZnO and Cu₂O to suppress carrier reverse recombination. Nondestructive interface deposition methods were employed to prepare CdS and Cu₂O functional layers. The CdS layers were unconventionally deposited in non-alkaline solution, which can inhibit etching on the ZnO surface, and Cu₂O layers were electrodeposited in ZnO-buffered alkaline solution which can also inhibit etching on the ZnO surface. Finally, the performance of solar cells was improved by adding a highly resistive CdS intermediate layer between ZnO and Cu₂O layers. This work demonstrated the nondestructive interface approach of chemical solution deposition of functional layers on ZnO and possibilities for further improvements to the performance of Cu₂O-based nanostructure solar cells with the addition of an intermediated layer.