Ferromagnetic order and critical behavior at surfaces of ultrathin epitaxial films

The critical behavior, ferromagnetic order and magnetic anisotropies of ultrathin, epitaxial, magnetic films is studied using electron capture spectroscopy (ECS), which is capable of probing the long-ranged and short-ranged electron spin polarization (ESP) at the topmost surface layer of uncoated and coated magnetic structures. For all systems [Ni(100)/Cu(100), Ni(100)/NaCl(100), fcc Fe(111)/Cu(111), Fe(100)/Ag(100), Tb/Fe(100)/Ag(100), Fe(100)/Au(100), hcp Tb(0001)/W(110), Fe(110)/W(110), V(100)/Ag(100), Pd(100)/Ag(100), Pd/W(110)] investigated so far, ferromagnetic order is detected. It is found that the surface Curie temperatureT _Cs depends on film thicknessd. ECS data obtained at the surface of various systems reveal the existence ofT- andd-dependent magnetic anisotropies. Although for V(100)/Ag(100) the measured critical exponent=0.128 agrees very well with=1/8 predicted for the two-dimensional Ising model, for other systems, such as Fe(100)/Au(100), the measured value (0.25) is in disagreement with theoretical predictions. The experimental results are discussed within the framework of presently available experimental and theoretical data.     

(Triisopropylsilyl)acetaldehyde acetal as a novel protective group for 1,2-diols

(Triisopropylsilyl)acetaldehyde dimethyl acetal (TIPS-ADMA) was synthesized from chlorotriisopropylsilane in three steps. Cyclic and acyclic 1,2-diols can be transformed to (triisopropylsilyl)ethylidene acetals (TIPS-AA). Removal of the acetal by LiBF₄ regenerates the starting diol in excellent yield even in the presence of an acetonide of 1,2-diol. The TIPS-AA group can survive under the deprotection conditions of the acetonide in acetic acid at 80 °C. Selective protection of 2,3- and 4,6-diols for O-methyl d-mannoside with TIPS-ADMA and selective deprotection of the acetals have been achieved.     

Synthesis,characterization, spectroscopy and thermal analysis of rare earth picrate complexes with <Emphasis Type="Italic">L</Emphasis>-lysine

Summary Rare earth picrate (RE) complexes with L-lysine (Lys) were synthesized and characterized. Elemental analysis (CHN), EDTA titrations and thermogravimetry data suggest a general formula RE(pic)₃·2Lys·2H₂O, where RE=La-Lu (without Pm) and Y, pic=picrate). IR spectra suggest that Lys is coordinated to the central ion through the nitrogen of the α-amino group. Parameters obtained from the absorption spectrum of the Nd compound indicated that the metal-ligand bonds are essentially electrostatic. Emission spectrum and biexponential behavior of the luminescence decay of the Eu compound suggest the existence of polymeric species. Thermogravimetric/derivative thermogravimetric (TG/DTG) and differential scanning calorimetry (DSC) curves of all complexes are very similar, with five events. The final products are the corresponding rare earth oxides and their X-ray diffraction patterns are identical to the calcinated oxides.</o:p>     

1,3,6,9,12,14,17,20-octaethynyltetrabenz[a,b,f,j,k,o]-4,5,10,11,15,16,21,22- octadehydro[18]annulene: a carbon-rich hydrocarbon

Dodecaynes 1a-d have been prepared via a convergent strategy that employs Sonogashira couplings as the carbon-carbon bond-forming tool. Due to the steric bulk of the DMTS groups, 1c adopts a nonplanar conformation, the dynamics of which have been probed by VT-NMR. The cobalt-catalyzed isomerization of 1a,b produced the new conjugated phenylenes 2a,b and 3a,b, respectively. [structure: see text]     

Simultaneous separation and identification of hashish constituents by coupled liquid chromatography-mass spectrometry (HPLC-MS)

Summary This paper reports the use of liquid chromatography for the separation and determination of the major cannabinoids extracted from hashish samples. The direct coupling to the mass spectrometer enables the selective identification both of neutral and acidic cannabinoids. The developed method does not require any preliminary derivatization and should, therefore, be of interest in forensic analysis for simple and unequivocal determination of hashish constituents.Part of this work was presented at the 2nd Italian-Spanish Joint Meeting of Medicinal Chemistry, 30 August–3 September 1995, Ferrara, Italy.     

Peptide labeling using 188Re, 188Re-MAG3 and 153Sm-H1ETA: A comparison on their in vitro lipophilicity

Lanreotide peptide was labeled with ¹⁵³Sm-H₁ETA and ¹⁸⁸Re-MAG₃ in order to evaluate whether or not their conjugation to the peptide produce significant differences of the in vitro lipophilicity with respect to the ¹⁸⁸Re-lanreotide prepared by the direct labeling method (highly lipophilic). The differences of lipophilicity between the complexes, were evaluated using a reverse phase HPLC system. The measured lipophilicity of ¹⁵³Sm-H₁ETA-lanreotide, ¹⁸⁸Re-MAG₃-lanreotide and ¹⁸⁸Re-lanreotide was taken to be the capacity factor [k" = (t _R-t ₀)/t ₀ where t _R is the retention time and t ₀ is the dead time] for each of the complexes under identical chromatography conditions. Results showed that the in vitro lipophilicity decreased in the order ¹⁸⁸Re-lanreotide (direct labeling), ¹⁸⁸Re-MAG₃-lanreotide and ¹⁵³Sm-H₁ETA-lanreotide. Since the last one has a capacity factor (k") similar to that of ¹⁸⁸Re-MAG₃, some renal elimination for ¹⁵³Sm-H₁ETA-lanreotide could be expected, which probably would reduce the unnecessary radiation dose to normal tissues.     

129I in soil and grass samples around a nuclear reprocessing plant

Neutron activation analysis was used to determine¹²⁹I in soil and grass samples around a reprocessing plant. The method involved wet oxidation of samples, using chromic acid, followed by distillation, collection of iodine in alkaline solution, loading on Dowex-1, irradiation and post-irradiation purification steps. The -activity of¹³⁰I isotope of the purified samples was measured for quantitative determination of¹²⁹I. The experimental results showed that¹²⁹I and the¹²⁹I/¹²⁷I atomic ratio in soil samples varied from 1.09×10^–4 to 5.33×10^–3 pCi g^–1 and 0.10×10^–6 to 6.12×10^–6, respectively. Further, the geometric mean of soil-to-plant transfer factor (Bv) for¹²⁹I was found to be 0.16 which was comparable with other published values.     

Mechanical analysis on rocket propellants

The mechanical properties of solid rocket propellants are very important for good functioning of rocket motors. During use and storage the mechanical properties of rocket propellants are changing, due to chemical and mechanical influences such as thermal reactions, oxidation reactions or vibrations. These influences can result in malfunctioning, leading to an unwanted explosion of the rocket motor. Most of modern rocket propellants consist of a polymer matrix (i.e. HTPB) filled with a crystalline material (i.e. AP, AN). However, the more conventional double base propellants consist of a solid gel matrix with additives, such as stabilizers. Both materials show a mechanical behaviour, quite similar to that of general polymers. To describe the material behaviour of both propellants a linear visco-elastic theory is often used to describe the mechanical behaviour for small deformations. Because the time-temperature dependency is also valid for these materials a mastercurve can be constituted. With this mastercurve the response properties (stiffness) under extreme conditions can be determined. At TNO-PML a mastercurve of a double base propellant was constituted using dynamical mechanical analysis (DMA) and compared with a mastercurve reduced from conventional (static) stress relaxation tests. The mechanical properties of this double base propellant determined by DMA were compared with conventional (quasi-static) tensile test results. This revised version was published online in July 2006 with corrections to the Cover Date.