Electrical properties and Schottky diodes using N-N′diphenyl-1-4phenylenediamine

Thin films of, N-N′diphenyl 1-4phenylene-diamineane are prepared using vacuum sublimation technique. The electrical conductivity from room temperature down to 127 K is studied. It is found that the conduction of charge carriers obeys T^−1/2 dependence on temperature. The average hopping distance, hopping energy, density of states and their variation due to post-deposition heat treatment are studied. Schottky diodes are fabricated with gold as ohmic contact and aluminium as Schottky contact. From the observed current voltage characteristics the saturation current density, diode ideality factor and the barrier height are determined. Their variation with air annealing is also investigated.     

A study of formation of solid ionic conductors in the mixed system (CdI2)b[(Ag2O)·(CrO3)]100-b (20≤b≤80)

Using Wagner's polarization technique and EMF method the joinic and silver ionic transport number measurements of various compositions of the mixed system CdI₂-Ag₂O-CrO₃ have been made. The presence of AgI in these materials has been inferred from the typical β → α phase transition of AgI, which is characterized by an endothermic peak at around 420 K in the DSC traces of these specimens. While the structural analysis performed by means of powder X-ray diffraction has revealed the formation of ionic phases involving polycrystalline compounds, the Fourier transform infrared (FTIR) spectroscopic results have indicated the presence of ionic species thus confirming the ionic nature of the products. The complex impedance studies carried out in the frequency range 20 Hz - 1 MHz and over the temperature range 294 – 442 K have revealed that the best conducting composition, namely 55%(CdI₂) – 45%(Ag₂O·CrO₃), would exhibit a silver ionic conductivity of 1.3×10⁻⁵Scm⁻¹ at 294 K.     

Observation of dielectronic satellites in the K-spectrum of argon ions in plasma produced by femtosecond laser pulses

The satellite structure of 1s2p ^1,3 P ₁-1s ²¹ S ₀ lines of the He-like argon ion in plasma produced by a 45-fs laser pulse in a gas-jet cluster target is measured with a high spectral resolution. Radiation transitions 2p → 1s from autoionizing states (AISs) are detected for ions ranging from Li-like to F-like. The spectrum observed is theoretically simulated with the use of the spectroscopic data for the AISs of multicharged ions obtained within the multiconfiguration relativistic Hartree-Fock method. Good agreement with experimental data is obtained when the main population channels of these states are taken into account for typical values of cluster-target plasma parameters.     

Syntactic characterization of closure under connected limits

Summary We give a syntactic characterization of (finitary) theories whose categories of models are closed under the formation of connected limits (respectively the formation of pullbacks and substructures) in the category of all structures. They are also those theories whose consistent extensions by new atomic facts admit in each component an initial structure (respectively an initial term structure), and also thoseT for whichM(T) is locally finitely multi-presentable in a canonical way. We also show that these two properties of theories are nonuniform.     

The frequency scale of speech intonation.

In intonation research, prominence-lending pitch movements have either been described on a linear or on a logarithmic frequency scale. An experiment has been carried out to check whether pitch movements in speech intonation are perceived on one of these two scales or on a psychoacoustic scale representing the frequency selectivity of the auditory system. This last scale is intermediary between the other two scales. Subjects matched the excursion size of prominence-lending pitch movements in utterances resynthesized in different pitch registers. Their task was to adjust the excursion size in a comparison stimulus in such a way that it lent equal prominence to the corresponding syllable in a fixed test stimulus. The comparison stimulus and the test stimulus had pitches running parallel on either the logarithmic frequency scale, the psychoacoustic scale, or the linear frequency scale. In one-half of the experimental sessions, the test stimulus was presented in the low register, while the comparison stimulus was presented in the high register, and, conversely, for the other half of the sessions. The result is that, in all cases, stimuli are matched in such a way that the average excursion sizes in different registers are equal on the psychoacoustic scale.     

Molecular dynamics simulation of processing using AFM pin tool

A three-dimensional molecular dynamics (MD) model is utilized to investigate the effect of tool geometry on the deformation process of the workpiece and the nature of deformation process at the atomic-scale. Results show that different states exist between the atomic force microscope (AFM) pin tool and the workpiece surface, i.e. the non-wear state, the ploughing state, the state in which ploughing is dominant and the state in which cutting plays a key role. A relationship between the deformation process of the workpiece and the potential energy variation is presented. The potential energy variation of atoms in different deformed regions in the workpiece such as plastically deformed region, elastically deformed region and the mixed deformation region is different. The features of variations of potential energy are discussed.     

Electrical behavior of the Au/MoS2 interface studied by light emission induced by scanning tunneling microscopy

Light emitted in the tunneling junction of a scanning tunneling microscope has been used to establish the electrical characteristics of nanojunctions made of Au islands deposited on flat MoS₂ surfaces. It is shown that these characteristics are those of rectifying contacts when the gold islands are isolated and that they evolve toward those of ohmic contacts when the island density increases. It is observed that the rectifying behavior also evolves over time as on infinite metal/semiconductor contacts. Using the STM tip, single gold islands can be manipulated on the MoS₂ surface so that their electrical behavior can be changed depending on their position with regard to the other islands.     

Effects of sputter deposition parameters and post-deposition annealing on the electrical characteristics of LaAlO3 dielectric films on Si

The influence of processing parameters on the electrical characteristics of RuO₂/LaAlO₃/Si metal-oxide-semiconductor structures was investigated. In particular, the sputtering regime during deposition of LaAlO₃ on Si and the atmosphere used in the post-deposition annealing step were addressed by determining capacitance-voltage and gate current-voltage characteristics. These results were correlated with compositional information obtained by Rutherford backscattering spectrometry and nuclear reaction analysis. A post-deposition annealing step in oxygen at 600 °C resulted in better electrical characteristics of the final structure as compared to the same treatment performed in nitrogen. This result is explained by oxygen ability to heal oxygen vacancies in the LaAlO₃ film, especially at the dielectric/semiconductor interface region. A thermalized sputtering regime during deposition of LaAlO₃ on Si leads to capacitors with electrical characteristics superior to those deposited in ballistic regime. PACS 77.84.Dy; 81.15.Cd; 81.40.Gh; 73.40.Qv; 82.80.Yc