Longitudinal DC electric discharge in a supersonic air flow

A longitudinal dc electric discharge in a submerged high-pressure supersonic air jet is described. Photographs of the discharge are provided. The experimental voltage across the discharge gap and the discharge current are given for two resistances of the resistor that limits the discharge current over a certain range of the discharge channel length along the air flow. The current-voltage discharge characteristic is provided at a constant discharge length. The main discharge characteristics are obtained from a comparison of the experimental and theoretical results calculated on the basis of the simplest model.     

Thermal ionization instability of an air discharge plasma in a microwave field

Results are presented from experimental studies of the initial stage of an air discharge initiated in a linearly polarized quasi-optical microwave beam. The discharge was excited at an air pressure at which the electron-neutral collision frequency in the discharge plasma was considerably higher than the circular frequency of the electromagnetic field and at a microwave field amplitude close to the threshold field for air breakdown. The experiments revealed relatively bright plasma channels stretched along the microwave electric field. The development rate of these channels and their characteristic transverse dimensions are estimated. A comparison of the experimental data and theoretical estimates indicates that the channels observed arise due to the onset of thermal ionization instability in the microwave discharge plasma.     

Anisotropy of the Complex Permittivity of the Kagome-Staircase Compounds Co<Subscript>3</Subscript>V<Subscript>2</Subscript>O<Subscript>8</Subscript> and Ni<Subscript>3</Subscript>V<Subscript>2</Subscript>O<Subscript>8</Subscript>: Experiment and Ab Initio Calculations

The anisotropy of the components of the complex permittivity of vanadate Co₃V₂O₈ and Co₃V₂O₈ single crystals in the paramagnetic phase are studied by optical ellipsometry in the spectral region 0.5–5.0 eV. Our experimental results support the weak anisotropy of the optical response detected earlier for axes a and c. The optical properties are also investigated along axis b. The properties of both compounds are compared. The optical spectra of both compounds along axis b are shifted toward low energies as compared to axes a and c. The maximum of the main interband absorption band of Co₃V₂O₈ is shifted toward low energies by 0.25–0.3 eV as compared to Co₃V₂O₈. The electronic structure parameters of both compounds are determined. Optical function spectra are analyzed using the results of ab initio band calculations.     

High-precision measurements of the compressibility and the electrical resistivity of bulk <Emphasis Type="Italic">g</Emphasis>-As<Subscript>2</Subscript>Te<Subscript>3</Subscript> glasses at a hydrostatic pressure up to 8.5 GPa

High-precision studies of the volume and the electrical resistivity of g-As₂Te₃ glasses at a high hydrostatic pressure up to 8.5 GPa at room temperature are performed. The glasses exhibit elastic behavior in compression only at a pressure up to 1 GPa, and a diffuse structural transformation and inelastic density relaxation (logarithmic in time) begin at higher pressures. When the pressure increases further, the relaxation rate passes through a sharp maximum at 2.5 GPa, which is accompanied by softening the relaxing bulk modulus, and then decreases, being noticeable up to the maximum pressure. When pressure is relieved, an unusual inflection point is observed in the baric dependence of the bulk modulus near 4 GPa. The polyamorphic transformation is only partly reversible and the residual densification after pressure release is 2%. In compression, the electrical resistivity of the g-As₂Te₃ glasses decreases exponentially with increasing pressure (at a pressure up to 2 GPa); then, it decreases faster by almost three orders of magnitude in the pressure range 2–3.5 GPa. At a pressure of 5 GPa, the electrical resistivity reaches 10^–3 Ω cm, which is characteristic of a metallic state; this resistivity continues to decrease with increasing pressure and reaches 1.7 × 10^–4 Ω cm at 8.1 GPa. The reverse metal–semiconductor transition occurs at a pressure of 3 GPa when pressure is relieved. When the pressure is decreased to atmospheric pressure, the electrical resistivity of the glasses is below the initial pressure by two–three orders of magnitude. Under normal conditions, both the volume and the electrical resistivity relax to quasi-equilibrium values in several months. Comparative structural and Raman spectroscopy investigations demonstrate that the glasses subjected to high pressure have the maximum chemical order. The glasses with a higher order have a lower electrical resistivity. The polyamorphism in the As₂Te₃ glasses is caused by both structural changes and chemical ordering. The g-As₂Te₃ compound is the first example of glasses, where the reversible metallization under pressure has been studied under hydrostatic conditions.     

Analysis of Methods of Investigation of the Vibration–Rotation Spectrum of Monomers and Dimers of Sulphur Hexafluoride Isotopes

Journal of Experimental and Theoretical Physics - The stability of the system of sulphur hexafluoride dimer SF6 under the action of external laser radiation has been estimated using ab initio...     

VUV photon induced fluorescence study of SF5CF3

The interaction of SF(5)CF(3) with vacuum-UV radiation has been investigated by photon induced fluorescence spectroscopy. Total fluorescence yield and dispersed fluorescence spectra of SF(5)CF(3) were recorded in the 200-1000 nm fluorescence window. In all cases, the fluorescence spectra resemble those of CF(3)X (X = H, F, Cl, and Br) molecules. At photon energies below 20 eV, the emission is attributed to the excited CF(3) and CF(2) fragments. The threshold for the CF(3) emission is 10.2 +/- 0.2 eV, giving an upper limit estimate for the SF(5)-CF(3) bond dissociation energy of 3.9 +/- 0.3 eV. The excitation functions of the CF(3) and CF(2) emissions were measured in the photon energy range 13.6-27.0 eV. The resonant structures observed in SF(5)CF(3) are attributed to electronic transitions from valence to Rydberg orbitals, following similar assignments in CF(3)X molecules. The photoabsorption spectrum of SF(5)CF(3) shows features at the same energies, indicating a strong contribution from Rydberg excitations.     

Synthesis of a novel Boc-protected cyclopropane-modified proline analogue

The synthesis of the Boc derivative of a novel member of the cyclopropane-modified proline library, Boc-protected 5-azaspiro[2.4]heptane-6-carboxylic acid, is reported. The synthesis was performed in six steps starting from (2S,4R)-4-hydroxyproline using a modified Simmons-Smith reaction as the key step. The reaction conditions for all the steps were carefully selected to avoid racemization at the chiral centers in the intermediates and the final product.     

A Comparison of Tissue Spray and Lipid Extract Direct Injection Electrospray Ionization Mass Spectrometry for the Differentiation of Eutopic and Ectopic Endometrial Tissues

Recent research revealed that tissue spray mass spectrometry enables rapid molecular profiling of biological tissues, which is of great importance for the search of disease biomarkers as well as for online surgery control. However, the payback for the high speed of analysis in tissue spray analysis is the generally lower chemical sensitivity compared with the traditional approach based on the offline chemical extraction and electrospray ionization mass spectrometry detection. In this study, high resolution mass spectrometry analysis of endometrium tissues of different localizations obtained using direct tissue spray mass spectrometry in positive ion mode is compared with the results of electrospray ionization analysis of lipid extracts. Identified features in both cases belong to three lipid classes: phosphatidylcholines, phosphoethanolamines, and sphingomyelins. Lipids coverage is validated by hydrophilic interaction liquid chromatography with mass spectrometry of lipid extracts. Multivariate analysis of data from both methods reveals satisfactory differentiation of eutopic and ectopic endometrium tissues. Overall, our results indicate that the chemical information provided by tissue spray ionization is sufficient to allow differentiation of endometrial tissues by localization with similar reliability but higher speed than in the traditional approach relying on offline extraction.

Open image in new window

Graphical Abstract ?