Iridium-mediated asymmetric hydrogenation of 2,3-diphenylbutadiene: a revealing kinetic study

Hydrogenation of 2,3-diphenylbutadiene mediated by a chiral iridium carbene oxazoline complex was studied. The kinetics of the reaction showed that it occurred in two distinct stages. The first corresponded to slow consumption of the diene to form half-hydrogenated products, i.e., monoenes. After all the diene was consumed, however, the reaction was much faster and more stereoselective. These data were interpreted in terms of possible catalytic intermediates.     

Influence of the electric field on a bio-mimetic film supported on a gold electrode

A model biological membrane was formed by fusion of mixed cholesterol and DMPC (dimyristoylphosphatidylcholine) phospholipid vesicles onto a gold-coated quartz support. The gold surface was charged and the influence of the charge at the solid support on the structure and integrity of the phospholipid bilayer was investigated using the specular reflection of neutrons and electrochemical measurements. When the surface charge density is close to zero, the lipid vesicles fuse directly on the surface to form a bilayer with a small number of defects and hence low water content. When the support's surface is negatively charged the film swells and incorporates water due to the field driven poration of the membrane. When the charge density is more negative then -8 microC cm(-2) the bilayer is detached from the metal surface. However, it remains in close proximity to the metal electrode, suspended on a thin cushion of water. The film thicknesses, calculated from neutron reflectivity, have allowed us to determine the tilt angle of the lipid molecules as a function of the support's charge density. The lipid molecules are tilted 55 degrees from the surface normal at zero charge density but become significantly more perpendicular (30 degrees tilt angle) at charge densities more negative than -8 microC cm(-2). The tilt angle measurements are in very good agreement with previous IR studies. This paper describes the highlights of a more in-depth study which is fully described in [1].     

A rigid linker-scaffold for solid-phase synthesis of dimeric pharmacophores

Bifunctional linker-scaffolds (compounds 1-3) were designed to meet several criteria for solid-phase syntheses of bivalent ligands. They have two amine-functionalized arms that can be differentially protected. Elaboration of these arms could give ligand-pharmacophore dimers wherein the two active components are held reasonably rigidly at around 10 A separation. Their bifunctional design also enables reactions of libraries with libraries to amplify diversity in a truly combinatorial fashion. Molecules 1-3 are also designed so that cleavage of the linker liberates the scaffold entity into solution under conditions that create only byproducts that should not interfere with biological assays. Thus they contain 2-nitrobenzene sulfonamide components that cleave in the presence of good nucleophiles. In the event, the linker-scaffolds 1-3 were prepared (Schemes 1 and 2). The N-benzyl system 2 was shown to have good stability to the types of conditions that might be used to functionalize the scaffold arms and to be sufficiently labile to the cleavage nucleophile (vide infra). The nucleophiles generally used to cleave nitrobenzene sulfonamides either generate undesirable byproducts (thiophenol or alkane thiols) or proved to be insufficiently reactive for the required solid-phase transformations (n-propylamine). However, sodium sulfide was investigated as a new alternative and shown to be a highly reactive cleavage agent that gives only volatile byproducts and sodium hydroxide. It is suggested that sodium sulfide is a highly desirable nucleophile for cleavage of 2-nitrobenzene sulfonamides, in general. The linker-scaffolds 1-3 were used to prepare a small library of bivalent ligands targeted to a protein receptor having charged cavities separated by approximately 10 A. These systems were made from guanidine, pyridinium, carboxylic acid, and sulfonic acid constituents (Tables 1 and 2).     

The synthesis of diene and of vinyl copolymers containing predetermined quantities of polynuclear hydrocarbon or heterocyclic adducts—VI. Copolymers of butadiene,acenaphthylene or phenanthrene,and a linking agent

Reactions of tetrahydrofuran solutions of butadiene and acenaphthylene with alkali metal produce dianionic species which give quantitative yields of copolymers when subsequently titrated with alkyl dibromides. These polymers, however, crosslink on standing; this has been correlated with the presence of a proportion of 1,5-dihydroacenaphthylene adduct in the product.Similar reactions involving phenanthrene are not quantitative and yield materials containing only a small proportion of the phenanthrene added. The low efficiency has been attributed to the low electron affinity of phenanthrene and to the ability of its dianion to react with alkyl halides by electron transfer rather than metathetically.     

The synthesis of diene and of vinyl copolymers containing predetermined quantities of polynuclear hydrocarbon or heterocyclic adducts—II. The reaction of alkali metal salts of anthracene with alkyl halides

The reactions of alkali metal salts of anthracene with alkyl halides result in the formation of 9,10-dialkyl 9,10-dihydroanthracenes as the principal product, although appreciable quantities of other adducts, notably the 1,2- and 1,4-dialkyl compounds, are also formed.When the disodium salt is used, these adducts account for the total anthracene consumed, but with the dilithium salt appreciable quantities of 9,(4-hydroxybutyl) anthracene compounds are produced; they resulted from additive reaction of the salt with the tetrahydrofuran solvent. In the present experiments, these adducts account for about 20 per cent of the anthracene, but this proportion may be increased by prolonging the standing of the dilithium anthracene solution before reacting with alkyl halide.     

Solvatochromism and piezochromism of dicyano-, tricyano-, and tetracyano-diimine-iron(II) complexes

The solvatochromism of several dicyano-bis-diimine-iron(II) complexes in various binary aqueous solvent mixtures has been established, at 25 °C. A solvent sensitivity scale has been developed for these complexes. The solvatochromic properties of two tricyano-terdentate ligand iron(II) complexes in several solvents have also been determined, as have those of a series of tetracyano-diimine complexes in DMSO–water media. These results have been analysed and systematic but varied trends of solvation were demonstrated. Piezochromic parameters for two complexes have been obtained and are discussed in the context of a solvatochromism/piezochromism correlation.     

Adsorption of<Emphasis Type="Italic"> N</Emphasis>-dodecyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethyl-3-ammonio-1-propanesulfonate (DDAPS), a model zwitterionic surfactant,on the Au(111) electrode surface

Electrochemical measurements including cyclic voltammetry, differential capacity, and chronocoulometry have been used to characterize the adsorption behaviors of the zwitterionic surfactant N-dodecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (DDAPS) on the Au(111) electrode surface. The thermodynamics of the ideally polarized electrode have been employed to determine the Gibbs excess and the Gibbs energy of adsorption. The results show that the adsorption of DDAPS has a multistate character. The first two states are observed at potentials close to zero charge. At low bulk DDAPS concentrations, it corresponds to the formation of a film of nearly flat adsorbed molecules. At higher concentrations it is converted into a hemimicellar state. The second state is formed at negative potentials and charge densities close to 0 C cm^–2. It corresponds to a film of tilted molecules oriented with the hydrocarbon tail towards the metal and the polar head toward the solution.Dedicated to Professor Zbigniew Galus on the occasion of his 70^th birthday and in recognition of his many contributions to electrochemistry.     

Use of basic dyes in the determination of anions, particularly as a means of determining antimony, thallium, and gallium

The use of xanthene, triphenylmethane and other basic dye cations as reagents for the determination of anions is reviewed. Elements and anions determined include Sb, Tl, Ga, Au, Te, In, Zn, Ta, Hg, Re, Sn, U, Os, B, Cr, Ag, ClO(4)(-), PO(4)(-), SO(4)(2-) and NO(3)(-). Difficulties encountered in developing satisfactory procedures involving basic dyes are discussed. Procedures for the purification and analysis of basic dye samples are outlined.     

Solvent effects on substitution reactions at complexes of the [Fe(CN)5L]3- type in binary aqueous mixtures

Summary The kinetics of replacement of 4,4-bipyridine, (4,4-bipy), and 4-cyanopyridine, (4-CNpy), by cyanide in [Fe(CN)₅-(4,4-bipy)]^3-. at 298 K have been studied in binary aqueous mixtures containing different amounts of t-butanol, methanol, glycerol, ethyleneglycol and sucrose. The plots of logarithms of the limiting rate constantsversus the mole fraction of water are linear over the entire composition range studied, showing the importance of solvation phenomena. A different straight line of log (k_L/s^–1)versus X_H2O is obtained for each mixture, indicating the influence of other solvent parameters on the reaction rate. A multiparameter regression of G _exp with A (acidity vector), B (basicity vector) and G^E is used for both reactions; plots of G _calc versus G _exp are linear with slopes of near unity.