Rapid capacitive detection of femtomolar levels of bisphenol A using an aptamer-modified disposable microelectrode array

A label-free and single-step method is reported for rapid and highly sensitive detection of bisphenol A (BPA) in aqueous samples. It utilizes an aptamer acting as a probe molecule immobilized on a commercially available array of interdigitated aluminum microelectrodes. BPA was quantified by measuring the interfacial capacitance change rate caused by the specific binding between bisphenol A and the immobilized aptamer. The AC signal also induces an AC electrokinetic effect to generate microfluidic motion for enhanced binding. The capacitive aptasensor achieves a limit of detection as low as 10 fM(2.8 fg ⋅ mL ^− 1) with a 20 s response time. The method is inexpensive, highly sensitive, rapid and therefore provides a promising technology for on-site detection of BPA in food and water samples.

A. AC electrokinetics effect plays a vital role in BPA detection by introducing microfluidic movement to accelerate the molecular transport to the electrode surface.

B. The ACEK capacitive aptasensor has a limit of detection as low as 10 fM (2.8 fg ⋅ mL ^− 1) with a 20-s response time.

     

Methoxylation and Glycosylation Effect on the Redox Mechanism of Citroflavones

The methoxylation and glycosylation effect on the redox mechanism of citroflavones, isorhoifolin, linarin, diosmetin and diosmin, was investigated. All citroflavones’ hydroxyl groups can be electrochemically oxidised, and the oxidation at the B‐ring occurs at a lower potential than at the A‐ring. The electrochemical oxidation is irreversible, pH‐dependent, with occurrence of one or two oxidation products, which undergo reversible redox reactions, depending on the number of OH substituents on the molecule. The glycosylation leads to a steric effect and decreasing of the oxidation peak currents whereas the methylation involves the formation of nonelectroactive oxidation products.     

Optimizing product assortment under customer-driven demand substitution

The problem of product assortment and inventory planning under customer-driven demand substitution is analyzed and a mathematical model for this problem is provided in this paper. Realistic issues in a retail context such as supplier selection, shelf space constraints, and poor quality procurement are also taken into account. The performance of three modified models, one that neglects customers’ substitution behavior, another that excludes supplier selection decision, and one that ignores shelf space limitations, are analyzed separately with computational experiments. The results of the analysis demonstrate that neglecting customer-driven substitution or excluding supplier selection or ignoring shelf space limitations may lead to significantly inefficient assortments. The effects of demand variability and substitution cost on optimal assortment and supplier selection decisions as well as on the optimal revenue are also investigated. The main contribution of this paper is the development of a practical and flexible model to aid retailers in finding optimal assortments to maximize the expected profit.     

X‐ray Raman spectroscopy of lithium‐ion battery electrolyte solutions in a flow cell

The effects of varying LiPF₆ salt concentration and the presence of lithium bis(oxalate)borate additive on the electronic structure of commonly used lithium‐ion battery electrolyte solvents (ethylene carbonate–dimethyl carbonate and propylene carbonate) have been investigated. X‐ray Raman scattering spectroscopy (a non‐resonant inelastic X‐ray scattering method) was utilized together with a closed‐circle flow cell. Carbon and oxygen K‐edges provide characteristic information on the electronic structure of the electrolyte solutions, which are sensitive to local chemistry. Higher Li⁺ ion concentration in the solvent manifests itself as a blue‐shift of both the π* feature in the carbon edge and the carbonyl π* feature in the oxygen edge. While these oxygen K‐edge results agree with previous soft X‐ray absorption studies on LiBF₄ salt concentration in propylene carbonate, carbon K‐edge spectra reveal a shift in energy, which can be explained with differing ionic conductivities of the electrolyte solutions.     

Optical absorption in surface space-charge layers of anisotropic and tilted valley systems

In n-channel accumulation and inversion layers on the (110) and (111) surface of Si, inter-subband optical transitions can be induced by infrared light incident normal to the surface. The resonance screening and exciton-like effect depend strongly on the nature of the valley degeneracy in this configuration. Examples of numerical calculation of the absorption spectrum are presented.     

Solvent effects on jet evolution during electrospinning of semi-dilute polystyrene solutions

Linear polystyrene with a weight average molecular weight of 393,400 g/mol was used with various solvents including tetrahydrofuran (THF), chloroform, carbon disulfide (CS₂), 1-methyl-2-pyrrolidinone (NMP), and N,N-dimethylformamide (DMF) to produce solutions, corresponding to a Berry number of about 9. The jet breakdown behavior of each of these solutions was studied with a high speed camera (2000 frames/s). The structure of the electrospun polymer was examined with a scanning electron microscope. The results indicate that jet breakdown with THF and chloroform entailed significant extensional flow, followed by the onset of instabilities, leading to the formation of numerous secondary jets under steady-state conditions. By comparison, the solution jets with DMF and NMP exhibit extensive whipping and splaying to produce a cloud of jets. In this case, few secondary jets were observed under steady-state conditions. A highly refined structure was observed in the electrospun polymer for NMP and DMF, in accordance with the extensive instabilities observed during jet breakdown. Limited jet instability observed with CS₂ solution suggests the significant effect of solvent evaporation. Typical primary jet velocities were measured to be on the order of 2-5 m/s.     

Evaluation of radioactivity induced in the accelerator building and its application to decontamination work

For decommissioning of the cyclotron and electron synchrotron facilities, the residual radioactivity in surface and core samples of concrete, collected from various parts of buildings, was determined by gamma-ray spectrometry. It was found that the concrete samples were activated mainly by neutrons and that the major radioisotopes were ¹⁵²Eu, ⁶⁰Co, ¹³⁴Cs, ²²Na and ⁵⁴Mn. The maximum activity induced by thermal neutron capture was observed at the depth of 10 cm in the concrete wall near the deflector of the cyclotron. Tritium was also produced by the neutron reaction, because its concentration was proportional to the activities of ¹⁵²Eu and ⁶⁰Co. The surface dose rates inside the accelerator room were also monitored to define the decontamination area. The surface dose rate was proportional to the residual radioactivity, such as ⁶⁰Co. A careful evaluation was very useful in order to minimize the radioactive waste during decontamination.     

Generation and characterization of highly strained dibenzotetrakisdehydro[12]- and dibenzopentakisdehydro[14]annulenes

To generate dibenzotetrakisdehydro[12]- and dibenzopentakisdehydro[14]annulenes ([12]- and [14]DBAs) having a highly deformed triyne moiety, [4.3.2]propellatriene-anneleted dehydro[12]- and dehydro[14]annulenes were prepared as their precursors. UV irradiation of the precursors resulted in the photochemical [2 + 2] cycloreversion to generate the strained [12]- and [14]DBAs, respectively. The [12]DBA was not detected by 1H NMR spectroscopy, but it was intercepted as Diels-Alder adducts in solution, suggesting its intermediacy. Its spectroscopic characterization was successfully carried out by UV-vis spectroscopy in a 2-methyltetrahydrofuran (MTHF) glass matrix at 77 K and by FT-IR spectroscopy in an argon matrix at 20 K. On the other hand, the [14]DBA was stable enough for observation by 1H and 13C NMR spectra in solution, though it was not isolated because of the low efficiency of the cycloreversion. The [14]DBA was also characterized by interception as Diels-Alder adducts in solution and by UV-vis spectroscopy in a MTHF glass matrix at 77 K. The kinetic stabilities of the DBAs are compared with the related dehydrobenzoannulenes with respect to the topology of the pi-systems. In addition, the tropicity of the [14]DBA is discussed based on its experimental and theoretical 1H NMR chemical shifts.     

Electron spin resonance studies on graft copolymerization of gaseous styrene onto preirradiated polypropylene. I. Preirradiation in the presence of oxygen

Graft copolymerization of gaseous styrene was carried out onto polypropylene preirradiated in the presence of oxygen at ?78°C and at room temperature, respectively. The origin of the graft initiation activities of these polymers was investigated by means of electron spin resonance (ESR) of trapped radicals. More grafting was found for the polymers irradiated at ?78°C than for those irradiated at room temperature. The difference of grafting between polymers irradiated at ?78°C and those irradiated at room temperature was not explained by the total amounts of trapped radicals, and it was found that all radicals are not effective in the grafting reaction. ESR measurements showed that there exist two kinds of peroxy radicals, one has more effective ability of abstracting hydrogen atoms from the surrounding polymer chains to form carbon radicals, and another is less effective at the temperature of grafting reaction (40°C). Although the samples irradiated at ?78°C contain the both types of radicals, those irradiated at room temperature do not contain the former type of radicals. It was shown that the carbon radicals produced by such a hydrogen abstraction reaction are actually the effective centers in the grafting reaction of polymers irradiated in the presence of oxygen.