Measurements of hyperon semileptonic decays at the CERN Super Proton Synchrotron

The charged hyperon beam at the CERN Super Proton Synchrotron (SPS) has been used to collect data on semileptonic decays ofΣ ^?,Ξ ^? andΛ. A magnetic channel selects 100 GeV/c negatively charged particles produced in the forward direction by interaction of the 200 GeV/c SPS proton beam on a BeO target. TheΣ ^? andΞ ^? hyperons are concurrently identified in a DISC ?erenkov counter, and their decay products are analysed by a magnetic spectrometer. Electron-hadron discrimination is achieved by the combined use of lead-glass and lead/scintillator counters, transition radiation detectors, and a ?erenkov counter. In this article we report results on the \(\Sigma ^ - \to \Lambda e^ - \bar v\) decay mode. Measurements of the Λ polarization and of the centre-of-mass distributions (baryon kinetic energy, electron-neutrino correlation, and Dalitz plot distributions) yield the vector to axialvector form factor ratiof ₁/g ₁=+0.034±0.080, in agreement with the value expected from the conserved vector current hypothesis (f ₁/g ₁=0). TheΣ ^?→Λe ^? v→ branching ratio measurement gives a value of (5.41±0.30)×10^?5. The effects of radiative corrections are not included in these results. They are discussed in the text. Results on the otherΞ ^?,Σ ^?, andΛ semileptonic decays are reported in separate articles.     

Far-infrared laser magnetic resonance spectrum of NHD

Far-infrared laser magnetic resonance spectra of NHD (X ²A′') (0,0,0) have been observed. Data are presented for the rotational transitions 3₁₃ ← 2₀₂ and 4₁₃ ← 3₂₂ observed at wavelengths of 211.3 and 374.1 μm respectively. Theoretical values of the transition magnetic field strengths have been calculated using the best available molecular constants. The agreement between theory and experiment confirms our spectroscopic assignments, but indicates that with further experimental data, considerable refinement of the molecular constants will be obtained.     

Facilitated transport from ternary cation mixtures through water—chloroform—water membrane systems containing macrocyclic ligands

Cation fluxes were determined for various three-component, equimolar mixtures of alkali metal, alkaline earth, and Pb²⁺ cations in a H₂O---CHCl₃---H₂O liquid membrane system incorporating macrocyclic polyethers as carriers. Carrier ligands studied were 18-crown-6, dicyclohexano-18-crown-6, 1,10-diaza-18-crown-6, 21-crown-7, dibenzo-24-crown-8, and cryptand [2.2.2]. Correlations were found between transport and relative cation:polyether cavity radii, the type of substituents present on the polyether ring, and the type and number of donor atoms present. All the ligands studied transported Pb²⁺ at higher rates than the other Mⁿ⁺ in the mixtures. Transport behavior in these multi-cation systems can be predicted from Mⁿ⁺—polyether complex stability constant data in most cases.     

Use of a Dual-Marker Form of Analysis to Estimate Binding Constants Between Receptors and Ligands by Affinity Capillary Electrophoresis

This work describes the use of a dual-standard analysis approach termed the time-average ratio (TAR) in affinity capillary electrophoresis (ACE) to estimate binding constants of receptors to ligands. In this form of analysis the TAR is the migration time of the receptor divided by the average of the sum of the migration times of two non-interacting standards. This change in TAR as a function of the concentration of ligand yields a value for the binding constant. This concept is demonstrated using three model systems: carbonic anhydrase B (CAB, EC 4.2.1.1) and arylsulfonamides, vancomycin (Van) and ristocetin (Rist) from Streptomyces orientalis and Nocardia lurida, respectively, and d-Ala- d-Ala terminus peptides. Three ACE techniques are used to examine the three systems: standard ACE, flow-through partial-filling ACE (FTPFACE), and on-column derivatization coupled to ACE. The findings described here demonstrate that ACE data analyzed using the TAR form of analysis yield binding constants between receptors and ligands comparable to those estimated using other ACE forms of analysis. A comparison to three other forms of analysis is described.     

Continuous sample deposition from reversed-phase liquid chromatography to tracks on a matrix-assisted laser desorption/ionization precoated target for the analysis of protein digests

Peptide mass fingerprinting by matrix-assisted laser desorption/ionization (MALDI)-mass spectrometry (MS) is one of the standard high-throughput methods for protein identification today. Traditionally this method has been based on spotting peptide mixtures onto MALDI targets. While this method works well for more abundant proteins, low-abundance proteins mixed with high-abundance proteins tend to go undetected due to ion suppression effects, instrumental dynamic range limitations and chemical noise interference. We present an alternative approach where liquid chromatography (LC) effluent is continuously collected as linear tracks on a MALDI target. In this manner the chromatographic separation is spatially preserved on the target, which enables generation of off-line LC-MS and LC-MS/MS data by MALDI. LC-MALDI sample collection provides improved sensitivity and dynamic range, spatial resolution of peptides along the sample track, and permits peptide mass mapping of low-abundance proteins in mixtures containing high-abundance proteins. In this work, standard and ribosomal protein digests are resolved and captured using LC-MALDI sample collection and analyzed by MALDI-TOF-MS.     

Reflection absorption infrared spectroscopy and temperature programmed desorption investigations of the interaction of methanol with a graphite surface

Reflection absorption infrared spectroscopy (RAIRS) and temperature programmed desorption (TPD) have been used to investigate the adsorption of methanol (CH(3)OH) on the highly oriented pyrolytic graphite (HOPG) surface. RAIRS shows that CH(3)OH is physisorbed at all exposures and that crystalline CH(3)OH can be formed, provided that the surface temperature and coverage are high enough. It is not possible to distinguish CH(3)OH that is closely associated with the HOPG surface from CH(3)OH adsorbed in multilayers using RAIRS. In contrast, TPD data show three peaks for the desorption of CH(3)OH. Initial adsorption leads to the observation of a peak assigned to the desorption of a monolayer. Subsequent adsorption leads to the formation of multilayers on the surface and two TPD peaks are observed which can be assigned to the desorption of multilayer CH(3)OH. The first of these shows a fractional order desorption, assigned to the presence of hydrogen bonding in the overlayer. The higher temperature multilayer desorption peak is only observed following very high exposures of CH(3)OH to the surface and can be assigned to the desorption of crystalline CH(3)OH.     

Electrochemical and spectroscopic characterization of the novel charge-transfer ground state in diimine complexes of ytterbocene

The novel charge-transfer ground state found in alpha,alpha'-diimine adducts of ytterbocene (C(5)Me(5))(2)Yb(L) [L = 2,2'-bipyridine (bpy) and 1,10-phenanthroline (phen)] in which an electron is spontaneously transferred from the f(14) metal center into the lowest unoccupied (pi*) molecular orbital (LUMO) of the diimine ligand to give an f(13)-L(*)(-) ground-state electronic configuration has been characterized by cyclic voltammetry, UV-vis-near-IR electronic absorption, and resonance Raman spectroscopies. The voltammetric data demonstrate that the diimine ligand LUMO is stabilized and the metal f orbital is destabilized by approximately 1.0 V each upon complexation for both bpy and phen adducts. The separation between the ligand-based oxidation wave (L(0/-)) and the metal-based reduction wave (Yb(3+/2+)) in the ytterbocene adducts is 0.79 V for both bpy and phen complexes. The UV-vis-near-IR absorption spectroscopic data for both the neutral adducts and the one-electron-oxidized complexes are consistent with those reported recently, but previously unreported bands in the near-IR have been recorded and assigned to ligand (pi*)-to-metal (f orbital) charge-transfer (LMCT) transitions. These optical electronic excited states are the converse of the ground-state charge-transfer process (e.g., f(13)-L(*-) <--> f(14)-L(0)). These new bands occur at approximately 5000 cm(-1) in both adducts, consistent with predictions from electrochemical data, and the spacings of the resolved vibronic bands in these transitions are consistent with the removal of an electron from the ligand pi* orbital. The unusually large intensity observed in the f --> f intraconfiguration transitions for the neutral phenanthroline adduct is discussed in terms of an intensity-borrowing mechanism involving the low-energy LMCT states. Raman vibrational data clearly reveal resonance enhancement for excitation into the low-lying pi* --> pi* ligand-localized excited states, and comparison of the vibrational energies with those reported for alkali-metal-reduced diimine ligands confirms that the ligands in the adducts are reduced radical anions. Differences in the resonance enhancement pattern for the modes in the bipyridine adduct with excitation into different pi* --> pi* levels illustrate the different nodal structures that exist in the various low-lying pi* orbitals.     

Evaluation of the VIDAS Listeria (LIS) immunoassay for the detection of Listeria in foods using demi-Fraser and Fraser enrichment broths, as modification of AOAC Official Method 999.06 (AOAC Official Method 2004.06)

A multilaboratory study was conducted to compare the VIDAS LIS immunoassay with the standard cultural methods for the detection of Listeria in foods using an enrichment modification of AOAC Official Method 999.06. The modified enrichment protocol was implemented to harmonize the VIDAS LIS assay with the VIDAS LMO2 assay. Five food types--brie cheese, vanilla ice cream, frozen green beans, frozen raw tilapia fish, and cooked roast beef--at 3 inoculation levels, were analyzed by each method. A total of 15 laboratories representing government and industry participated. In this study, 1206 test portions were tested, of which 1170 were used in the statistical analysis. There were 433 positive by the VIDAS LIS assay and 396 positive by the standard culture methods. A Chi-square analysis of each of the 5 food types, at the 3 inoculation levels tested, was performed. The resulting average Chi square analysis, 0.42, indicated that, overall, there are no statistical differences between the VIDAS LIS assay and the standard methods at the 5% level of significance.     

Validation of the CALUX bioassay for the screening of PCDD/Fs and dioxin-like PCBs in retail fish

The chemical-activated luciferase expression (CALUX) assay is a reporter gene assay that detects dioxin-like compounds based on their ability to activate the aryl hydrocarbon receptor (AhR) and thus expression of the reporter gene. In this paper, the CALUX assay was examined for its application in the screening of polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (dioxin-like PCBs) in retail fish. The sample extracts were cleaned up on a sulfuric acid-silica gel column followed by an activated carbon column, and the AhR activity of the separated PCDD/F and dioxin-like PCB fractions was determined using the assay. The quantitative limit for 2,3,7,8-tetrachlorodibenzo-p-dioxin (2,3,7,8-TCDD) was 0.98 pg ml(-1) (0.19 pg assay(-1) in the standard curve, corresponding to 0.16 pg g(-1) of CALUX-based toxic equivalency (2,3,7,8-TCDD equivalents) in the tested sample. Recovery tests in which dioxins were added to fish samples resulted in acceptable recoveries (77-117%). The CALUX assay performed well in the analysis of dioxins in fish samples and a comparative study revealed a strong correlation between the CALUX assay and high-resolution gas chromatography-high-resolution mass spectrometry analysis for the determination of PCDD/Fs (r = 0.89) and dioxin-like PCBs (r = 0.91) in retail fish (n = 22). These data revealed that the CALUX assay would be a useful screening method for PCDD/Fs and dioxin-like PCBs in retail fish.     

μ+ depolarization inAlGd alloys

The ⁺ depolarization rate in diluteAlGd alloys containing 50 and 450 atomic ppm Gd was measured in a transverse field of 80 Oe over the temperature range 6–300 K. For both alloys, A increased dramatically above 200 K, reaching values of 0.69 and 0.93 s^–1, respectively, near room temperature. The results are interpreted as providing evidence for a thermally-activated trapping mechanism.This work was supported by the U.S. Department of Energy.