On the C-16 configuration of sitsirikine

The indole alkaloid sitsirikine has been synthesised by a biomimetic conversion of strictosidine and its C-16 configuration established as R by cyclisation to a 16,17-dihydroheteroyohimbine.     

Determination of 6-N-trimethyllysine in urine by high-performance liquid chromatography

A method for determination of 6-N-trimethyllysine in urine is described. Trimethyllysine and the chemically analogous 6-N-triethyllysine internal standard were isolated from aqueous samples by microcolumn ion-exclusion chromatography. The specimens were derivatized by reaction with 1-fluoro-2,4-dinitrobenzene and reaction byproducts extracted by organic solvents. The trimethyllysine and internal standard derivatives were separated easily from other sample constituents by reversed-phase paired-ion high-performance liquid chromatography with spectrophotometric detection at 405 nm. Standard curves were linear over a sample concentration range of 10-150 nmol/ml; the detection limit corresponded with 0.1 nmol trimethyllysine injected into the chromatograph. The procedure was used for determination of trimethyllysine in human urine.     

Reflections on spontaneous asymmetric synthesis by amplifying autocatalysis

Spontaneous generation of chirality was observed in the course of studying the mechanism of asymmetric autocatalysis by NMR in ZnR2 alkylation of pyrimidin-5-aldehydes. A systematic study was carried out in order to discover its origins. Even in clean fresh non-glass reaction vessels spontaneous ee was clearly observed, and was not dependent on any single reaction parameter. For comparison it was demonstrated that enantiomerically pure Zn alkoxide catalyst could control the configuration of the reaction product even when present at below micromolar concentrations. The high propensity of the Soai reaction system to produce an enantiomerically enriched product without initial bias is suggested to result from stochastic effects. These are especially important in autocatalysis because all the final products can be derived by breeding from a small number of initial events. The statistical excess of one enantiomer in that set is sufficient to generate a measurable ee in the product. The process is aided by the requirement for dimerisation before the product is an active catalyst. An enumeration that rationalises these observations is provided.     

Enantioselective conjugate addition to α,β-unsaturated esters and amides mediated by lithium perchlorate

An efficient method for the enantioselective 1,4-conjugate addition of amines to α,β-unsaturated esters containing an inexpensive chiral auxiliary, such as (S)-2-methyl-1-butanol and fenchyl alcohol, in solvent-free conditions mediated by solid lithium perchlorate is reported. Over 12 examples of the products are generated in excellent yields, accompanied by moderate enantioselectivity. The concentrated solution of LiClO₄ in a diethyl ether system works well for the enantioselective 1,4-addition of organolithium compounds to α,β-unsaturated amides without any side reactions.     

Solid-state synthesis of a conducting polythiophene via an unprecedented heterocyclic coupling reaction

Prolonged storage ( approximately 2 years) or gentle heating (50-80 degrees C) of crystalline 2,5-dibromo-3,4-ethylenedioxythiophene (DBEDOT) affords a highly conducting, bromine-doped poly(3,4-ethylenedioxythiophene) (PEDOT), as confirmed by solid-state NMR, FTIR, CV, and vis-NIR spectroscopies. The novel solid-state polymerization (SSP) does not occur for 2,5-dichloro-3,4-ethylenedioxythiophene (DCEDOT), and requires a much higher temperature (>130 degrees C) for 2,5-diiodo-3,4-ethylenedioxythiophene (DIEDOT). X-ray structural analysis of the above dihalothiophenes reveals short Hal.Hal distances between adjacent molecules in DBEDOT and DIEDOT, but not in DCEDOT. The polymerization may also occur in the melt but is significantly slower and leads to poorly conductive material. Detailed studies of the reaction were performed using ESR, DSC, microscopy, and gravimetric analyses. SSP starts on crystal defect sites; it is exothermic by 14 kcal/mol and requires activation energy of approximately 26 kcal/mol (for DBEDOT). The temperature dependence of the conductivity of SSP-PEDOT (sigma(rt) = 20-80 S/cm) reveals a slight thermal activation. It can be further increased by a factor of 2 by doping with iodine. Using this approach, thin films of PEDOT with conductivity as high as 20 S/cm were fabricated on insulating flexible plastic surfaces.     

Mechanistic evaluation of the halocyclization of 4-penten-1-ol by some Bis(2-substituted pyridine) and Bis(2,6-disubstituted pyridine)bromonium triflates

The halocyclization reaction of 4-penten-1-ol mediated by various bis(2-substituted pyridine) and (2,6- disubstituted pyridine)bromonium triflates (P(2)Br(+)OTf(-)) was investigated to determine the influence of the substituents on the mechanism of reaction. In all cases, the reaction proceeds via a two-step process where the starting P(2)Br(+) reversibly dissociates to a reactive monosubstituted PBr(+), which then is captured by 4-penten-1-ol to form halocyclized product (2-bromomethyltetrahydrofuran). The dissociation rate constant of P(2)Br(+) (k(d)) is sensitive to the steric bulk at the 2- and 6-positions, and in the case of the 2, 6-dicyclohexylpyridine or 2,6-dicyclopentylpyridine, the P(2)Br(+) species are too unstable to isolate. The partitioning ratio of the reactive intermediate (PBr(+)) between reversal and product formation (k(-)(d)/k(2)) is not particularly sensitive to the nature of the pyridine, the limiting values being 3-7 except in the case of bis(2(-)-menthylpyridine)bromonium triflate where the k(-)(d)/k(2) ratio is approximately 80. The reaction of 4-penten-1-ol and its OD isotopomer with bis(lutidine)bromonium triflate was investigated to determine the deuterium kinetic isotope effect (dkie) on the bromocyclization reaction. The (k(-)(d)/k(2))(H/D) ratio is 1.0, indicating that the rate-limiting step for the bromocyclization is probably formation of a PBr(+)-4-penten-1-ol complex which does not involve substantial changes in the bonding of the OH. The cyclization of 4-penten-1-ol and 4-pentenoic acid mediated by bis(2(-)-menthylpyridine)bromonium triflate produces an enantiomeric excess in the cyclized products of only 2.4% and 4.8% respectively.     

Studies of organotin(IV)-orthoquinone systems

The primary process in the reaction of hexaphenylditin with various substituted orthoquinones (Q) is shown to involve attack by the quinone at a phenyl ligand. The intermediate thus formed decomposes to yield Ph₃Sn(SQ^·), where S(Q^·−) is the corresponding semiquinonate. Rearrangement of these species in solution gives rise to biradicals, while intramolecular electron transfer may lead to the formation and precipitation of Ph₂Sn(CAT), where CAT²⁻ is the corresponding substituted catecholate. The identification of these processes depends in part on electron paramagnetic resonance spectroscopy. The reaction of Ph₃SnCl or Ph₂SnCl₂ with Na(TBSQ^·) (TBSQ^·−=3,5-di-tert-butyl-orthobenzosemiquinonate) results in the formation of Ph₂Sn(TBSQ^·), which can undergo redistribution and intramolecular electron transfer, so that the solution chemistry of these latter systems is similar to that of the products of the Sn₂Ph₆+Q reaction.     

Kinetic and thermodynamic studies on ligand substitution reactions and base-on/base-off equilibria of cyanoimidazolylcobamide, a vitamin B12 analog with an imidazole axial nucleoside

Ligand substitution reactions of the vitamin B12 analog cyanoimidazolylcobamide, CN(Im)Cbl, with cyanide were studied. Cyanide substitutes imidazole (Im) in the alpha-position more slowly than it substitutes dimethylbenzimidazole in cyanocobalamin (vitamin B12). The kinetics of the displacement of Im by CN- showed saturation behaviour at high cyanide concentration; the limiting rate constant was found to be 0.0264 s(-1) at 25 degrees C and is characterized by the activation parameters: DeltaH(not =) = 111 +/- 2 kJ mol(-1), DeltaS(not =) = +97 +/- 6 J K(-1) mol(-1), and DeltaV(not =) = +9.3 +/- 0.3 cm3 mol(-1). These parameters are interpreted in terms of an I(d) mechanism. The equilibrium constant for the reaction of CN(Im)Cbl with CN- was found to be 861 +/- 75 M(-1), which is significantly less than that obtained for the reaction of cyanocobalamin with CN- (viz. 10(4) M(-1)). pKbase-off for the base-on/base-off equilibrium was determined spectrophotometrically and found to be 0.99 +/- 0.05, which is about 0.9 pH units higher than that obtained previously in the case of cyanocobalamin. In addition, the kinetics of the base-on/base-off reaction was studied using a pH-jump technique and the data obtained revealed evidence for an acid catalyzed reaction path. The results obtained in this study are discussed in reference to those reported previously for cyanocobalamin.     

Linear free energy relationship of the energy of the CTTS transition of Halide ions with the solvatochromic parameter α

A linear free energy relationship was found betweenv _max, the energy of the absorption maximum of chloride, bromide, or iodide ion in various solvents, and the solvatochromic parameter which is a measure of the hydrogen bond donor ability of the solvent. The relationships are: for chloride,v _max=6.99+50.16 kK; for bromide,v _max=5.52+45.20 kK; for iodide,v _max=5.02+40.33 kK. The correlation ofv _max for iodide ion with gave a larger correlation coefficient and smaller standard deviation than a correlation with the E _T (30) parameter of Dimroth. From the values ofv _max for iodide ion and the solvated electron in liquid ammonia at 25°C, these correlations indicate a preliminary value of 0.00 for the parameter of liquid ammonia. This had not been reported before and is lower than expected from a general knowledge of the physical and chemical properties of liquid ammonia but is consistent with a more detailed consideration and recent gas phase measurements of hydrogen bond donor strength.     

Evidence for the direct isomerization of a platinocyclobutane to an olefin complex

Dichloro-2,3,3-trimethyl-1-platinocyclobutane,

, prepared by the metathetical reaction of Zeise's dimer and 1,1,2-trimethylcyclopropane, reacts with pyridine in chloroform to produce a platinum complex of 2,3-dimethyl-1-butene

. Reaction of I with pyridine at low temperatures (ca. ?40° C) leads to a pyridine addition compound (III) in which the platinocyclobutane ring remains intact. The thermal isomerization of III, which may be conveniently studied using NMR, produces a mixture of II and the free olefin.