Mesoporous silica-supported uranyl: synthesis and photoreactivity

A mesoporous silica-supported uranyl material (U(aq)O(2)(2+)-silica) was prepared by a co-condensation method. Our approach involves an I(-)M(+)S(-) scheme, where the electrostatic interaction between the anionic inorganic precursor (I(-)), surfactant (S(-)), and cationic mediator (M(+)) provides the basis for the stability of the composite material. The synthesis was carried out under acidic conditions, where the anionic sodium dodecyl sulfate provided the template for the uranyl cation and silicate to condense. Excitation with visible or near-UV light of aqueous suspensions of U(aq)O(2)(2+)-silica generates an excited state that decays with k(0) = 1.5 x 10(4) s(-1). The reaction of the excited state with aliphatic alcohols exhibits kinetic saturation and concentration-dependent kinetic isotope effects. For 2-propanol, the value of k(C)3(H)7(OH)/k(C)()3(D)7(OH) decreases from 2.0 at low alcohol concentrations to 1.0 in the saturation regime at high alcohol concentrations. Taken together, the data describe a kinetic system controlled by chemical reaction at one extreme and diffusion at the other. At low [alcohol], the second-order rate constants for the reaction of silica-U(aq)O(2)(2+) with methanol, 2-propanol, 2-butanol, and 2-pentanol are comparable to the rate constants obtained for these alcohols in homogeneous aqueous solutions containing H(3)PO(4). Under slow steady-state photolysis in O(2)-saturated suspensions, U(aq)O(2)(2+)-silica acts as a photocatalyst for the oxidation of alcohols with O(2).     

Syntheses of gold-manganese and gold-rhenium clusters, [(Ph3PAu)3M(CO)4] and [(Ph3PAu)4M(CO)4] (M = Mn, Re), and the crystal structure of [(Ph3PAu)4Mn(CO)4]BF4

The specific additions of one, three or four Ph₃PAu groups to [M(CO)₅]⁻ (M=Mn, Re) are described. Thus [M(CO)₅] ⁻ in THF reacts with [(Ph₃PAu)₃O]BF₄ to give [(Ph₃PAu)₄Mn(CO)₄]BF₄. An X-ray crystal structure of the M = Mn example shows the cation to have a trigonal bipyramidal Au₄Mn core with the Mn in an equatorial site. The previously known neutral (Ph₃PAu)₃M(CO)₄ clusters are formed by addition of two Ph₃PAu groups, using the mixed reagent [(Ph₃PAu) ₃O]BF₄/[ppn][Co(CO)₄], to Ph₃PAuM(CO)₅, which itself is readily prepared from [M(CO)₅]⁻ and Ph₃PAuCl.     

Mono-cyclopentadienyl complexes of lanthanum: synthesis and characterization of anilido derivatives

Use of the bulky cyclopentadienyl ligand [η⁵-C₅H₂(SiMe₃)₃-1,2,4]⁻ (Cp?) allows for the isolation of monomeric, mono-ring lanthanide species. As previously reported, (Cp?)K reacts with LaI₃(THF)₄ (THF=tetrahydrofuran) in THF/pyridine to form the mono-ring complex (Cp?)LaI₂(py)₃ (1) (py=pyridine); a minor product of this reaction is the bis-ring species (Cp?)₂LaI(py) (2). The solid state structure of 2 reveals a monomeric compound containing a pseudo-tetrahedral metal center exhibiting no unusual intramolecular contacts. Addition of one equiv of KNHAr (Ar=2,6-ⁱPr₂C₆H₃) to complex 1 in THF generates the mono-anilido compound (Cp?)LaI(NHAr)(THF)₂ (3), which may be converted to the more stable pyridine adduct (Cp?)LaI(NHAr)(py)₂ (4) by the addition of pyridine to 3. An X-ray crystal structure of 3 indicated a trigonal bipyramidal metal center with the anilido group oriented trans to the iodide atom (N1-La1-I1=123.1(3)°). A structural study on the bis-pyridine adduct 4 revealed a similar C_s-symmetric structure with a slightly increased N_anilido-La-I angle of 132.1(2)°. Addition of KNHAr to the di-iodo bipyridine adduct (Cp?)LaI₂(bipy)(py) (5), in which the two iodide atoms are cis-disposed, yields the mono-anilido complex (Cp?)LaI(NHAr)(bipy)(py) (6) (bipy=2,2^′-bipyridine); this compound may also be prepared by the addition of bipy to (Cp?)LaI(NHAr)(py)₂ (4). An X-ray diffraction study shows that the lanthanum center in 6 is octahedrally coordinated by a Cp? ring, an iodide, an anilido group, a pyridine molecule and two nitrogens of a bipy molecule. In this case, the anilido moiety and the iodide ligand are arranged in a cis fashion (N_anilido-La-I=111.2(2)°), resulting in a complex with C₁ symmetry. Both (Cp?)LaI(NHAr)(py)₂ (4) and (Cp?)LaI(NHAr)(bipy)(py) (6) are inactive as catalysts for the hydroamination/cyclization of 2-amino-hex-5-ene.     

Electrochemical Detection of MS2 Phage Using a Bead‐based Immunoassay and a NanoIDA

A microbead based sandwich immunoassay for MS2 bacteriophage was developed using an interdigitated array (IDA) electrode with nanoscale dimensions (220 nm electrode width, 620 nm gap). The IDA was fabricated using an electron beam lithographic lift‐off technique. After an antibody‐assisted capture of MS2 using paramagnetic microbeads, a β‐galactosidase labeled secondary antibody was used to convert p‐aminophenyl‐β‐D ‐galactopyranoside (PAPG) into the redox active p‐aminophenol (PAP). Amperometric detection of PAP with IDA electrodes at +300 and ?200 mV vs. a Ag/AgCl reference electrode was used to measure the result, detecting MS2 concentrations as low as 10 ng/mL.     

Synthesis of a novel prostaglandin H2(pgH2) analogue

We describe a five-step synthesis of a PGH₂ analogue from (R)-glyceraldehyde acetonide via formation of 1,2(S)-0-isopropylidene-hex-3(E)-en-5-one, conjugate addition of prostanoid C₁₃- C₂₀ side-chain as the cuprate with C₁-C₇ side-chain used to quench the resultant enolate, and finaily acid-catalysed ketal exchange to provide the desired analogue.     

Impact of prefractionation using Gradiflow on two-dimensional gel electrophoresis and protein identification by matrix assisted laser desorption/ionization-time of flight-mass spectrometry

Prefractionation of protein samples prior to two-dimensional electrophoresis (2-DE) has the potential to increase the dynamic detection range for proteomic analysis. We evaluated a membrane-based electrophoretic separation technique (Gradiflow) for its ability to fractionate an exoproteome sample from the filamentous fungus Trichoderma reesei. The sample was separated on the basis of size and charge. Buffer optimization was found to be necessary for successful size fractionation. Fractionation by charge was used to resolve the sample into four fractions that were subjected to analysis by two-dimensional electrophoresis (2-DE). Enhanced detection of low-abundance proteins with selective removal of high-abundance species was achieved. Fractionated and unfractionated samples were examined for differences in the ability to identify proteins following 2-DE using trypsin in-gel digestion followed by peptide mass fingerprinting using matrix assisted laser desorption/ionization-time of flight-mass spectrometry (MALDI-TOF-MS). Fractionated samples showed marked improvement in protein identification ability and sequence coverage. This study demonstrates the utility of the Gradiflow for fractionation, resulting in an enhancement of resolution and characterization of a moderately complex proteome.     

A structural analysis of the complexes of (S,S)-dimethylpyridino-18-crown-6 with (R) and (S)-[α-(1-naphthyl)ethyl]ammonium perchlorate by NMR techniques and molecular modeling

Significant - interaction is found in the complexes of (S, S)-dimethylpyridino-18-crown-6 with (R)- and (S)-[-(1-naphthyl)ethyl]ammonium perchlorate. This finding is supported by the¹H NOESY NMR spectral technique, greater chemical shift changes of aromatic protons in both host and guest molecules upon complexation, and by molecular mechanics calculations. Because of the flexibility of the ligand, the tripod hydrogen bonding causes¹³C relaxation times of all periphery carbons to decrease without significant selectivity. Rotational energy barrier calculations of the methyl groups of the complexed ligand also show that the (S, S)-host-(R)-guest is the more stable complex.     

Determination of alcohol polyether average molar oligomer value/distribution via supercritical fluid chromatography coupled with UV and MS detection

Supercritical fluid chromatography (SFC) was used for the analysis of ethoxylated and propoxylated surfactants. Samples were derivatized to phenylated silyl ethers with a disilazane-chlorosilane mixture. Addition of a phenyl group to the surfactant allowed UV-absorbance detection of each oligomer. Acetonitrile and methanol were evaluated as mobile phase modifiers. Better peak shape was realized with methanol-modified CO2 on an octadecyl silica bonded phase than with acetonitrile-modified CO2. Peak assignments were made via SFC coupled with electrospray ionization-mass spectrometry (ESI-MS) in the positive ion mode. A sulfonamide-embedded alkyl stationary phase was also evaluated for separation of the derivatized samples. SFC-UV and SFC-ESI-MS data were jointly used for calculation of average molar oligomer values which were then compared to values calculated from 1H NMR data of non-derivatized samples. The derivatization or separation method using the sulfonamide embedded phase required no preliminary cleanup and yielded reproducible oligomer values that were consistent with those of the manufacturer's nominal values.     

High-resolution spectroscopy of induced chiral dimers: a study of the dimers of ethanol by Fourier transform microwave spectroscopy

We present the first recording of the high-resolution spectrum of an induced chiral dimer. Three conformers of the induced chiral dimers of ethanol have been observed using a pulsed molecular-beam Fourier transform microwave spectrometer. The rotational constants of the normal isotopomers of the three species have been determined to be (a) A=5113.826(5), B=1329.7214(4), and C=1257.5151(3) MHz, (b) A=5086.459(5), B=1316.6508(4), and C=1243.6329(4) MHz, and (c) A=4851.608(5), B=1369.7558(6), and C=1243.4184(4) MHz. The observed species have been assigned to calculated structures via Kraitchman double substitution analyses and ab initio calculations. The Kraitchman analyses and the fitted centrifugal distortion parameters suggest that the deuterium bond is significantly stronger than the hydrogen bond in the dimers of ethanol.