Critical Analysis of Hypothesis Tests in Federal Information Processing Standard (140-2)

This work presents an analysis of the existing dependencies between the tests of the FIPS 140-2 battery. Two main analytical approaches are utilized, the first being a study of correlations through the Pearson’s correlation coefficient that detects linear dependencies, and the second one being a novel application of the mutual information measure that allows detecting possible non-linear relationships. In order to carry out this study, the FIPS 140-2 battery is reimplemented to allow the user to obtain p-values and statistics that are essential for more rigorous end-user analysis of random number generators (RNG).     

Analytical performance study of solar blind non-line-of-sight ultraviolet short-range communication links

Motivated by recent advances in solid-state incoherent ultraviolet sources and solar blind detectors, we study communication link performance over a range of less than 1 km with a bit error rate (BER) below 10(-3) in solar blind non-line-of-sight situation. The widely adopted yet complex single scattering channel model is significantly simplified by means of a closed-form expression for tractable analysis. Path loss is given as a function of transceiver geometry as well as atmospheric scattering and attenuation and is compared with experimental data for model validation. The BER performance of a shot-noise-limited receiver under this channel model is demonstrated.     

Automated data processing of [1H-decoupled] 13C MR spectra acquired from human brain in vivo

In clinical 13C infusion studies, broadband excitation of 200 ppm of the human brain yields 13C MR spectra with a time resolution of 2-5 min and generates up to 2000 metabolite peaks over 2h. We describe a fast, automated, observer-independent technique for processing [1H-decoupled] 13C spectra. Quantified 13C spectroscopic signals, before and after the administration of [1-13C]glucose and/or [1-13C]acetate in human subjects are determined. Stepwise improvements of data processing are illustrated by examples of normal and pathological results. Variation in analysis of individual 13C resonances ranged between 2 and 14%. Using this method it is possible to reliably identify subtle metabolic effects of brain disease including Alzheimer's disease and epilepsy.     

Modeling binaural loudness

A survey of data on the perception of binaurally presented sounds indicates that loudness summation across ears is less than perfect; a diotic sound is less than twice as loud as the same sound presented monaurally. The loudness model proposed by Moore et al. [J. Audio Eng. Soc. 45, 224-240 (1997)] determines the loudness of binaural stimuli by a simple summation of loudness across ears. It is described here how the model can be modified so as to give more accurate predictions of the loudness of binaurally presented sounds, including cases where the sounds at the two ears differ in level, frequency or both. The modification is based on the idea that there are inhibitory interactions between the internal representations of the signals at the two ears, such that a signal at the left ear inhibits (reduces) the loudness evoked by a signal at the right ear, and vice versa. The inhibition is assumed to spread across frequency channels. The modified model gives reasonably accurate predictions of a variety of data on the loudness of binaural stimuli, including data obtained using loudness scaling and loudness matching procedures.     

Rapid quantification of TBP and TBP degradation product ratios by FTIR-ATR

Tri-n-butyl phosphate (TBP) is the key complexant within the plutonium and uranium reduction extraction process used to extract uranium and plutonium from used nuclear fuel. During reprocessing TBP degrades to dibutyl phosphate (DBP), butyl acid phosphate (MBP), butanol, and phosphoric acid over time. A method for rapidly monitoring TBP degradation is needed for the support of nuclear forensics. Therefore, a Fourier transform infrared spectrometry-attenuated total reflectance (FTIR-ATR) technique was developed to determine approximate peak intensity ratios of TBP and its degradation products. The technique was developed by combining variable concentrations of TBP, DBP, and MBP to simulate TBP degradation. This method is achieved by analyzing selected peak positions and peak intensity ratios of TBP and DBP at different stages of degradation. The developed technique was tested on TBP samples degraded with nitric acid. In mock degradation samples, the 1,235 cm^?1 peak position shifts to 1,220 cm^?1 as the concentration of TBP decreases and DBP increases. Peak intensity ratios of TBP positions at 1,279 and 1,020 cm^?1 relative to DBP positions at 909 and 1,003 cm^?1 demonstrate an increasing trend as the concentration of DBP increases. The same peak intensity ratios were used to analyze DBP relative to MBP whereas a decreasing trend is seen with increasing DBP concentrations. The technique developed from this study may be used as a tool to determine TBP degradation in nuclear reprocessing via a rapid FTIR-ATR measurement without gas chromatography analysis.     

Synthesis of well‐defined side chain fullerene polymers and study of their self‐aggregation behaviors

Monoalkynyl‐functionalized fullerene was precisely synthesized starting with pristine fullerene (C₆₀) and characterized by multiple techniques. Methyl methacrylate and 6‐azido hexyl methacrylate were then randomly copolymerized via reversible addition fragmentation chain transfer polymerization to build polymer backbones with well‐controlled molecular weights and copolymer compositions. Finally, these two moieties were covalently assembled into a series of well‐defined side chain fullerene polymers (SFPs) via the copper‐mediated click reaction which was verified by Fourier transform infrared spectroscopy and ¹H NMR. The fullerene loadings of the resultant polymers were estimated by thermogravimetric analysis and UV–vis spectroscopy, demonstrating consistent and high conversions in most of the samples. The morphology studies of the SFPs were performed both in solution and on solid substrates. Very intriguing self‐aggregation behaviors were detected by both gel permeation chromatography and dynamic light scattering analyses. Furthermore, the scanning electron microscopic images of these polymers showed the formation of various supramolecular nanoparticle assemblies and crystalline‐like clusters depending on the fullerene contents and polymer chain lengths. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3572–3582     

Determination of Cadmium in Plant Tissues by Electrothermal Atomisation Atomic Absorption Spectrometry with Matrix/Analyte Modification and Smith-Hieftje Background Correction

Abstract

Pressure decomposition in a microwave oven provides a rapid means of sample preparation for plant tissue analyses. The use of delayed atomisation cuvettes, Smith-Hieftje background correction and matrix/analyte modification enables accurate determinations of cadmium concentrations in plant materials to be made. However, care should be taken to restrict the concentrations of modifier used, as too high a concentration may lead to problems with both tube life and over-correction by the Smith-Hieftje background correction system.     

Statistical Foundations of Liquid-Crystal Theory. I: Discrete Systems of Rod-Like Molecules

We develop a mechanical theory for systems of rod-like particles. Central to our approach is the assumption that the external power expenditure for any subsystem of rods is independent of the underlying frame of reference. This assumption is used to derive the basic balance laws for forces and torques. By considering inertial forces on par with other forces, these laws hold relative to any frame of reference, inertial or noninertial. Finally, we introduce a simple set of constitutive relations to govern the interactions between rods and find restrictions necessary and sufficient for these laws to be consistent with thermodynamics. Our framework provides a foundation for a statistical mechanical derivation of the macroscopic balance laws governing liquid crystals.     

Rearrangement of Indolinesulfonamides to Sulfones Using Polyphosphoric Acid (PPA)

Unlike other N-alkylsulfonanilides, indolinesulfonamides hydrolyze in 98% sulfuric acid. Recent work in this laboratory has shown that rearrangement can be achieved by using polyphosphoric acid. A series of substituted indolinesulfonamides has been prepared and rearranged to their corresponding indoline arylsulfones.