Design aspects for the development of mixed-metal supramolecular complexes capable of visible light induced photocleavage of DNA

Mixed-metal supramolecular complexes that couple ruthenium or osmium based light absorbers to a central rhodium(III) core have been designed which photocleave DNA upon irradiation with visible light. The complexes [[(bpy)(2)Ru(dpp)](2)RhCl(2)](PF(6))(5), [[(bpy)(2)Os(dpp)](2)RhCl(2)](PF(6))(5), and [[(tpy)RuCl(dpp)](2)RhCl(2)](PF(6))(3), where bpy = 2,2'-bipyridine, tpy = 2,2':6',2' '-terpyridine, and dpp = 2,3-bis(2-pyridyl)pyrazine, all exhibit intense metal to ligand charge transfer (MLCT) based transitions in the visible but possess lower lying metal to metal charge transfer (MMCT) excited states. These supramolecular complexes with low lying MMCT states photocleave DNA when excited into their intense MLCT transitions. Structurally similar complexes without this low lying MMCT state do not exhibit DNA photocleavage, establishing the role of this MMCT state in the DNA photocleavage event. Design considerations necessary to produce functional DNA photocleavage agents are presented herein.     

Muonium chemistry: kinetics of the gas phase reaction Mu + F2 → MuF + F from 300 to 400 K

The MSR (muonium spin rotation) technique was used to measure the chemical reaction rate for Mu + F₂ → MuF + F in N₂ moderator at ≈ 1 atm from 295 to 383 K giving the Arrhenius expression: log₁₀k (?/mole s) = (10.83 ± 0.20) - (200 ± 50)/T, with k = (1.46 ± 0.11) × 10¹⁰ ?/mole s at 300 K. This is at least 6.8 times the room temperature rate constant for the analogous H atom reaction. The measured activation energy and enhancement over the H reaction rate are indicative of significant tunnelling in the Mu reaction, in agreement with the recent collinear quantum mechanical calculations of Connor et al.     

Two-photon induced fluorescence and resonance-enhanced ionization of sulfur atoms

Two-photon induced fluorescence and resonance-enhanced photoionization have been observed in atomic sulfur originating from both the ³P_2,1,0 and the ¹D₂ states. Sulfur atoms are generated by the sequential multiphoton dissociation of CS₂ at probing wavelengths. The two-photon absorption process involves the 3 ³P_2,1,0 → 4 ³P_2,0,1 or the 3 ¹D₂ → 4 ¹F₃ transitions with resolution of the individual J″ → J′ transitions in most cases. Intensities of the 3³P_J″ → 4 ³P_J′ transitions have been compared with Hartree-Fock calculated transition probabilities from the analogous transitions in atomic oxygen. Photoionization is observed in a three-photon (two to resonance) ionization originating from the ³P_2,1,0 and the ¹D₂ states. Induced fluorescence is observed at 167 and 180 nm which is dipole-allowed radiation from the intermediate ³S⁰₁ and ¹D⁰₂ states, respectively.     

Formation of muonium and a muonic radical in fullerene

Three distinct electronic states were detected for positive muons (⁺) after implantation into a C₆₀ powder sample. About 40% of the ⁺ remained in the bare (diamagnetic) state, essentially an interstitial charged point particle. The rest of the muons were found to thermalize predominantly in two muonium (Mu=⁺ e^–) atomic species. A vacuum Mu state, with hyperfine coupling close to that of free Mu, most likely at the molecular center, and a muonic substituted radical, i.e. a hydrogen-like Mu addition to double bonds on the carbon rings. This opens up a rich subfield of fullerene spectroscopy using muons.     

Bis(fluoroalkyl)acrylic and methacrylic phosphate monomers, their polymers and some of their properties

Ten fluoromonomers of structure (R_FO)₂P(O)OCH₂CH₂OC(O)CRCH₂ were made in 30-64% yield by treating the chloridates (R_FO)₂P(O)Cl with HOCH₂CH₂OC(O)CRCH₂ in chloroform in the presence of triethylamine [R_F=CF₃CH₂, C₂F₅CH₂, C₃F₇CH₂, C₄F₉CH₂, C₄F₉CH₂CH₂ or C₆F₁₃CH₂CH₂; R  H or Me]. The chloromonomer (CCl₃CH₂O)₂P(O)OCH₂CH₂OC(O)CHCH₂ was obtained analogously in 29% yield. Polymerisation of the acrylate monomers, but not the methacrylate monomers, could be effected using α-azoisobutyronitrile as a radical initiator. Acrylic polymers having CF₃CH₂O, CCl₃CH₂O and C₆F₁₃CH₂CH₂O side-chains were obtained as translucent rubbers. Specimens of cotton fabric were treated with solutions of the polymers, and average water and oil repellency ratings measured. Fabric coated with the polymer with the C₆F₁₃CH₂CH₂O side-chain afforded protection from penetration of the test liquids. Treated fabrics were subjected to the limiting oxygen index (LOI) test according to BS EN ISO 4589-2 (1999): this test determines the point at which a material just burns in a volumetric flow of oxygen and nitrogen. The treated fabrics were more fire-resistant (LOI 22-29%) than the untreated fabric (LOI 18%). Fabric coated with the CCl₃CH₂O-based polymer can be considered fire-retardant (LOI 29%). The fluoromonomers were tested for anti-acetylcholinesterase activity and were found to be poor enzyme inhibitors; they are predicted to possess low acute toxicity.     

Mixed-metal supramolecular complexes coupling phosphine-containing Ru(II) light absorbers to a reactive Pt(II) through polyazine bridging ligands

Supramolecular bimetallic Ru(II)/Pt(II) complexes [(tpy)Ru(PEt(2)Ph)(BL)PtCl(2)](2+) and their synthons [(tpy)Ru(L)(BL)](n)()(+) (where L = Cl(-), CH(3)CN, or PEt(2)Ph; tpy = 2,2':6',2'-terpyridine; and BL = 2,2'-bipyrimidine (bpm) or 2,3-bis(2-pyridyl)pyrazine (dpp)) have been synthesized and studied by cyclic voltammetry, electronic absorption spectroscopy, mass spectral analysis, and (31)P NMR. The mixed-metal bimetallic complexes couple phosphine-containing Ru chromophores to a reactive Pt site. These complexes show how substitution of the monodentate ligand on the [(tpy)RuCl(BL)](+) synthons can tune the properties of these light absorbers (LA) and incorporate a (31)P NMR tag by addition of the PEt(2)Ph ligand. The redox potentials for the Ru(III/II) couples occur at values greater than 1.00 V versus the Ag/AgCl reference electrode and can be tuned to more positive potentials on going from Cl(-) to CH(3)CN or PEt(2)Ph (E(1/2) = 1.01, 1.55, and 1.56 V, respectively, for BL = bpm). The BL(0/-) couple at -1.03 (bpm) and -1.05 V (dpp) for [(tpy)Ru(PEt(2)Ph)(BL)](2+) shifts dramatically to more positive potentials upon the addition of the PtCl(2) moiety to -0.34 (bpm) and -0.50 V (dpp) for the [(tpy)Ru(PEt(2)Ph)(BL)PtCl(2)](2+) bridged complex. The lowest energy electronic absorption for these complexes is assigned as the Ru(d pi) --> BL(pi*) metal-to-ligand charge transfer (MLCT) transition. These MLCT transitions are tuned to higher energy in the monometallic synthons when Cl(-) is replaced by CH(3)CN or PEt(2)Ph (516, 452, and 450 nm, for BL = bpm, respectively) and to lower energy when Pt(II)Cl(2) is coordinated to the bridging ligand (560 and 506 nm for BL = bpm or dpp). This MLCT state displays a broad emission at room temperature for all the dpp systems with the [(tpy)Ru(PEt(2)Ph)(dpp)PtCl(2)](2+) system exhibiting an emission centered at 750 nm with a lifetime of 56 ns. These supramolecular complexes [(tpy)Ru(PEt(2)Ph)(BL)PtCl(2)](2+) represent the covalent linkage of TAG-LA-BL-RM assembly (TAG = NMR active tag, RM = Pt(II) reactive metal).     

The BIOREMA project—part 3: International interlaboratory comparison for bio-ethanol test methods

The main objective of the reference materials for biofuel specifications (BIOREMA) project is the development of two test materials (one bio-ethanol material and one biodiesel material) with well-established reference values. Of a series of three papers, this part describes the material preparation, homogeneity study, stability study, and characterisation of the bio-ethanol material. The test material thus obtained was used in an interlaboratory comparison (ILC) to assess current practices and comparability amongst laboratories providing bio-ethanol testing services. Only 13 participants provided data, resulting in a small dataset for evaluation. Further, it appeared that for a number of laboratories, there was not sufficient material for the determination of all requested parameters. In most cases, as far as the data permit, it can be concluded that the consensus values (based on participant’s results) are in good agreement with the reference or the BIOREMA values (obtained by NMIs participating in the project). For three parameters, namely ethanol content, water content, and density, there is good agreement between the reference and consensus values. For these parameters, the reproducibility standard deviation is close to, or even smaller than, the expanded uncertainty associated with the reference value. A number of parameters show very poor reproducibility, for example, pH_e, electrolytic conductivity, and acidity. The same applies to sodium and copper content, which are very low and therefore challenging parameters to measure accurately. The results of the ILC underpin the need for certified reference materials and demonstrate the requirement for more robust quality control to improve the precision and trueness of the results from testing laboratories.     

Formal and total synthesis of (±)-cycloclavine

A ring fragmentation and intramolecular azomethine ylide 1,3-dipolar cycloaddition sequence of reactions was successfully used in the preparation of a known (±)-cycloclavine precursor in good overall yield. Results of efforts to incorporate the tetrasubstituted cyclopropane ring present in cycloclavine are also discussed.     

A Conjugate Addition Approach to Diazo-Containing Scaffolds with β Quaternary Centers

Structurally complex diazo-containing scaffolds are formed by conjugate addition to vinyl diazonium salts. The electrophile, a little studied α-diazonium-α,β-unsaturated carbonyl compound, is formed at low temperature under mild conditions by treating β-hydroxy-α-diazo carbonyls with Sc(OTf)₃. Conjugate addition occurs selectively at the 3-position of indole to give α-diazo-β-indole carbonyls, and enoxy silanes react to give 2-diazo-1,4-dicarbonyl products. These reactions result in the formation of tertiary and quaternary centers, and give products that would be otherwise difficult to form. Importantly, the diazo functional group is retained within the molecule for future manipulation. Treating an α-diazo ester indole addition product with Rh₂(OAc)₄ caused a rearrangement to occur to give a 2-(1H-indol-3-yl)-2-enoate. In the case of diazo ketone compounds, this shift occurred spontaneously on prolonged exposure to the Lewis acidic reaction conditions.