A simple capacitive cell for the measurement of liquids dielectric constant under transient thermal conditions

A simple device for the measurement of the complex dielectric permittivity of liquids in various thermodynamic states has been developed. It uses a cylindrical aluminium capacitor of a type currently applied in tuning antenna circuits. The capacitor is filled with the liquid solution under study. A comparison of its capacity is made with that of the nitrogen filled capacitor tested under the same thermal conditions. This comparison allows the determination of the real and imaginary part of the solutions permittivity as a function of temperature (between 150 and 300 K) and frequency (between 100 Hz to 2 MHz). After validating the technique with pure glycerol and pure 1,2-propanediol, spectroscopic measurements have been undertaken on pure and diluted 1,2-propanediol in water. Due to the low heat capacity and the high thermal conductivity of the capacitor, cooling rates of 40 K/min have been achieved inside the solution, allowing measurements in the supercooled liquid and vitreous states. Results are presented and discussed in terms of relaxation and the physical states of the sample. By selecting the required thermal conditions, this device permits the observation of thermal transitions, such as ice crystallisation, and measurements to be conducted in the unstable supercooled liquid state. These measurements are necessary in the development of an effective electromagnetic warming device for vitrified cryoprotective solutions.     

Quantum studies of H atom trapping on a graphite surface

The trapping and sticking of H and D atoms on the graphite (0001) surface is examined, over the energy range of 0.1-0.9 eV. For hydrogen to chemisorb onto graphite, the bonding carbon must pucker out of the surface plane by several tenths of an angstrom. A quantum approach in which both the hydrogen and the bonding carbon atoms can move is used to model the trapping, and a potential energy surface based on density functional theory calculations is employed. It is found, for energies not too far above the 0.2 eV barrier to chemisorption that a significant fraction of the incident H or D atoms can trap. The forces on the bonding carbon are large, and it can reconstruct within 50 fs or so. After about 100 fs, most of the trapped H atoms scatter back into the gas phase, but the 5%-10% that remain can have lifetimes on the order of a picosecond or more. Calculations of the resonance eigenstates and lifetimes confirm this. An additional lattice degree of freedom is included quantum mechanically and is shown to significantly increase the amount of H that remains trapped after 1 ps. Further increasing the incident energy destabilizes the trapped state, leading to less H remaining trapped at long times. We estimate that for a full dissipative bath, the sticking probabilities should be on the order of 0.1.     

Development of combinatorial chemistry methods for coatings: high-throughput weathering evaluation and scale-up of combinatorial leads

Combinatorial screening of materials formulations followed by the scale-up of combinatorial leads has been applied for the development of high-performance coating materials for automotive applications. We replaced labor-intensive coating formulation, testing, and measurement with a "combinatorial factory" that includes robotic formulation of coatings, their deposition as 48 coatings on a 9x12-cm plastic substrate, accelerated performance testing, and automated spectroscopic and image analysis of resulting performance. This high-throughput (HT) performance testing and measurement of the resulting properties provided a powerful set of tools for the 10-fold accelerated discovery of these coating materials. Performance of coatings is evaluated with respect to their weathering, because this parameter is one of the primary considerations in end-use automotive applications. Our HT screening strategy provides previously unavailable capabilities of (1) high speed and reproducibility of testing by using robotic automation and (2) improved quantification by using optical spectroscopic analysis of discoloration of coating-substrate structure and automatic imaging of the integrity loss of coatings. Upon testing, the coatings undergo changes that are impossible to quantitatively predict using existing knowledge. Using our HT methodology, we have developed several cost-competitive coatings leads that match the performance of more costly coatings. These HT screening results for the best coating compositions have been validated on the traditional scales of coating formulation and weathering testing. These validation results have confirmed the improved weathering performance of combinatorially developed coatings over conventional coatings on the traditional scale.     

A general 13C NMR spectrum predictor using data mining techniques

A general-case neural network model for 13C NMR spectrum prediction (estimation) was built from more than 8,300 carbon atoms having various environments. Building the model from the data set required a few weeks' work using commercial software. Average deviation on test data is ca. 4 ppm. There is no limit on molecule complexity. Estimation error does not depend on molecule size or complexity. The emphasis is on the data, the method and the results, not on the processes that take place inside the modelling software. Advantages, disadvantages and peculiarities of neural network-based data modelling ("data mining") are described at length. The differences in data handling between the data mining approach and traditional statistical modelling techniques are discussed and illustrated in detail. The spectrum predictor is available from PMSI at no charge.     

Stabilization, injection and control of quantum cascade lasers, and their application to chemical sensing in the infrared

Quantum cascade lasers (QCLs) are a relatively new type of semiconductor laser operating in the mid- to long-wave infrared. These monopolar multilayered quantum well structures can be fabricated to operate anywhere between 3.5 and 20 microm, which includes the molecular fingerprint region of the infrared. This makes them an ideal choice for infrared chemical sensing, a topic of great interest at present. Frequency stabilization and injection locking increase the utility of QCLs. We present results of locking QCLs to optical cavities, achieving relative linewidths down to 5.6 Hz. We report injection locking of one distributed feedback grating QCL with light from a similar QCL, demonstrating capture ranges of up to +/-500 MHz, and suppression of amplitude modulation by up to 49 dB. We also present various cavity-enhanced chemical sensors employing the frequency stabilization techniques developed, including the resonant sideband technique known as NICE-OHMS. Sensitivities of 9.7 x 10(-11) cm(-1) Hz(-1/2) have been achieved in pure nitrous oxide.     

Comparative macrocycle binding of the anticancer drug phenanthriplatin by cucurbit[<Emphasis Type="Italic">n</Emphasis>]urils, β-cyclodextrin and <Emphasis Type="Italic">para</Emphasis>-sulfonatocalix[4]arene: a <Superscript>1</Superscript>H NMR and molecular modelling study

The potential anticancer drug phenanthriplatin, [cis-(NH₃)₂(phenanthridine)Cl]⁺, forms supramolecular complexes with cucurbit[n]urils (CB[n], n?=?7 or 8), β-cyclodextrin and para-sulfonatocalix[4]arene (sCX[4]) as determined by ¹H NMR spectroscopy and molecular modeling. The results show that cucurbit[7]uril binds over the long arm of the drug, where hydrophobic effects and two hydrogen bonds stabilise binding. For cucurbit[8]uril, two phenanthriplatin molecules can bind simultaneously within the macrocycle’s cavity. Unfortunately, Na⁺ was able to displace the drug from both CB[7] and CB[8] making the macrocycles unsuitable as delivery vehicles for phenanthriplatin. Drug binding to β-cyclodextrin occurs at the portal of the macrocycle with no part of the phenanthriplatin located within the cavity. Phenanthriplatin binding to sCX[4] occurs in a 2-to-1, macrocycle-to-drug, ratio with the formation of a capsule-like complex where each sCX[4] binds over opposing ends of the drug. The results indicate that para-sulfonatocalix[4]arene is the only suitable macrocycle of the four studied for further research into phenanthriplatin drug delivery.     

Line tension and its influence on droplets and particles at surfaces

In this review we examine the influence of the line tension τ on droplets and particles at surfaces. The line tension influences the nucleation behavior and contact angle of liquid droplets at both liquid and solid surfaces and alters the attachment energetics of solid particles to liquid surfaces. Many factors, occurring over a wide range of length scales, contribute to the line tension. On atomic scales, atomic rearrangements and reorientations of submolecular components give rise to an atomic line tension contribution τ_atom (～1 nN), which depends on the similarity/dissimilarity of the droplet/particle surface composition compared with the surface upon which it resides. At nanometer length scales, an integration over the van der Waals interfacial potential gives rise to a mesoscale contribution |τ_vdW| ～ 1–100 pN while, at millimeter length scales, the gravitational potential provides a gravitational contribution τ_grav ～ +1–10 μN. τ_grav is always positive, whereas, τ_vdW can have either sign. Near wetting, for very small contact angle droplets, a negative line tension may give rise to a contact line instability. We examine these and other issues in this review.