Dehydrogenation of ethylbenzene with nitrous oxide in the presence of mesoporous silica materials modified with transition metal oxides

The novel mesoporous templated silicas (MCM-48, SBA-15, MCF, and MSU) were used as supports for transition metal (Cu, Cr, or Fe) oxides. The catalysts were synthesized using the incipient wetness impregnation, and characterized by low-temperature N2 sorption, DRIFT, photoacoustic IR spectroscopy, UV-vis diffuse reflectance spectroscopy, and temperature-programmed desorption of ammonia. It was shown that the preparation method used results in different distributions and dimensions of the transition metal oxide clusters on the inert support surface. The prepared catalysts were tested in the reaction of oxidative dehydrogenation of ethylbenzene in the presence of nitrous oxide. The iron-containing catalysts showed the highest catalytic activity. The presence of isolated Fe3+ was found to be the most important factor influencing the ethylbenzene conversion. The undesirable effect of the increase in selectivity toward CO2 was observed for the samples with the highest concentrations of acidic surface sites.     

Molecular Recognition in Anion Coordination Chemistry. Structure,Binding Constants and Receptor-Substrate Complementarity of a Series of Anion Cryptates of a Macrobicyclic Receptor Molecule

The crystal structures of four anion cryptates [X^? ? BT -6H⁺] formed by the protonated macrobicyclic receptor BT -6H⁺ with F^?, Cl^?, Br^? and N have been determined. They provide a homogeneous series of anion coordination patterns with the same ligand. The small F^?-ion is tetracoordinated, while Cl^? and Br^? are bound in an octahedron of H-bonds. The non-complementarity between these spherical anions and the ellipsoïdal cavity of BT -6H⁺ is reflected in ligand distortions. Structural complementarity is achieved for the linear triatomic substrate N, which is bound by two pyramidal arrays of three H-bonds, each interacting with a terminal N-atom of N. The formation constants of the complexes formed by BT -6H⁺ with a variety of anions (halides, N, NO, carboxylates, SO, HPO, AMP^2?, ADP^3?, ATP^4?, P₂O) have been determined. Very strong complexations are found, as well as marked electrostatic and structural effects on stability and selectivity; in particular the binding of F^?, Cl^?, Br^?, and N may be analyzed in terms of the crystal structure data. The cryptand BT -6H⁺ is a molecular receptor containing an ellipsoïdal recognition site for linear triatomic substrates of size compatible with the size of the molecular cacity. Further developments of various aspects of anion coordination chemistry are considered.     

A prenylated xanthone with antimicrobial activity from the seeds of Symphonia globulifera

A prenylated xanthone has been isolated from the seeds of Symphonia globulifera together with the known compounds sitosterol and oleanolic acid. The structure of the new compound was elucidated by spectroscopic methods.     

Xanthones and other constituents of Allanblackia monticola (Guttiferae)

A xanthone derivative, 3,6,7-trihydroxy-1-methoxyxanthone has been isolated from the stem bark of Allanblackia monticola together with other known compounds, 2,6-dihydroxy-1-methoxyxanthone, allanxanthone A, epicathechin and oleanolic acid acetate. The structure of the new compound was elucidated by spectroscopic methods.     

Microrobotics and MEMS-based fabrication techniques for scaffold-based tissue engineering

Scaffold based tissue engineering strategies use cells, biomolecules and a scaffold to promote the repair and regeneration of tissues. Although scaffold-based tissue engineering approaches are being actively developed, most are still experimental, and it is not yet clear what defines an ideal scaffold/cell construct. Solid free form fabrication (SFF) techniques can precisely control matrix architecture (size, shape, interconnectivity, branching, geometry and orientation). The SFF methods enable the fabrication of scaffolds with various designs and material compositions, thus providing a control of mechanical properties, biological effects and degradation kinetics. This paper reviews the application of micro-robotics and MEMS-based fabrication techniques for scaffold design and fabrication. It also presents a novel robotic technique to fabricate scaffold/cell constructs for tissue engineering by the assembly of microscopic building blocks.     

Frustrated Lewis Pair Chemistry Enables N2 Borylation by Formal 1,3-Addition of a B−H Bond in the Coordination Sphere of Tungsten

The first example of a formal 1,3-B−H bond addition across the M−N≡N unit of an end-on dinitrogen complex has been achieved. The use of Piers’ borane HB(C₆F₅)₂ was essential to observe this reactivity and it plays a triple role in this transformation: 1) electrophilic N₂-borylation agent, 2) Lewis acid in a frustrated Lewis pair-type B−H bond activation, and 3) hydride shuttle to the metal center. This chemistry is supported by NMR spectroscopy and solid-state characterization of products and intermediates. The combination of chelate effect and strong σ donation in the diphosphine ligand 1,2-bis(diethylphosphino)ethane was mandatory to avoid phosphine dissociation that otherwise led to complexes where borylation of N₂ occurred without hydride transfer.     

Highly efficient metal‐free organic catalysts to design new Environmentally‐friendly starch‐based blends

A one‐step process is reported to directly synthesize blends of poly(trimethylene carbonate) (PTMC) with a modified granular starch. Trimethylene Carbonate (TMC) ring‐opening polymerization is performed in the presence of native starch particles in bulk conditions at 150 °C and the efficiency of metal‐free organic catalysts (TBD and phosphazene superbases P1‐t‐Oct, P2‐t‐bu, and P4‐t‐bu) are investigated to replace the organo‐metallic stannous octanoate initiator. TMC monomer is successively converted into PTMC and the robustness of organic catalysts is highlighted with significant activities at very low concentrations (<100 ppm), where stannous octanoate is inefficient. Reactivity of starch toward TMC ROP is deeply investigated by NMR techniques and a starch‐graft‐PTMC is indirectly evidenced. Starch substitution degree reaches 0.9% indicating that PTMC grafting only occurs at the surface of swollen granular starch. PTMC graft length from the starch surface remained low in the range 2–12 and model ROP reactions highlight the role of TMC hydrolysis on PTMC graft length. Despite low PTMC grafts, a fine dispersion of intact starch particles into the PTMC matrix is evidenced. Consequently, metal‐free organic catalysts at low concentrations are promising candidates for synthesizing blends of PTMC with high loadings of surface‐modified starch (32% by weight) in 2 min within a one‐step process. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 493–503     

Synthesis,Structure, and DFT Analysis of the THF Solvate of 2-Picolyllithium: A 2-Picolyllithium Solvate with Significant Carbanionic Character

Previous studies of different solvates of 2-methylpyridyllithium (2-picolyllithium) have uncovered electronic structures corresponding to aza-allyl and enamido resonance forms of the metallated pyridine-based compounds. Here, we report the synthesis and characterization of [2-CH₂Li(THF)₂C₅H₄N], a new THF solvate. X-ray crystallographic studies reveal a dimeric arrangement featuring a non-planar eight-membered [NCCLi]₂ ring, in which the primary cation-anion interaction is between the central Li atom and the C atom of the deprotonated methyl group [length, 2.285(2) Å], suggesting a new carbanionic resonance structure for this 2-picolyllithium series. The significant carbanionic character of [2-CH₂Li(THF)₂C₅H₄N] was confirmed by gas-phase DFT calculations [B3LYP/6-311+G(d)] with the calculated electron density interrogated by means of quantum theory of atoms in molecules (QTAIM) and natural bond orbital (NBO) analyses. For comparison these computational analyses were also performed on the literature structures of [2-CH₂Li(2-Picoline)C₅H₄N] and [2-CH₂Li(PMDETA)C₅H₄N]. In a reactivity study, [2-CH₂Li(THF)₂C₅H₄N] was found to undergo nucleophilic addition to pyridine to generate dipyridylmethane in a good yield.