Excited states of100Tc from100Mo(p,nγ)100Tc reaction and the parabolic rule

γ-spectra and excitation functions of the¹⁰⁰Mo(p, nγ)¹⁰⁰Tc reaction were measured in the 1.2–3.6 MeV proton energy range by using thick, enriched targets, Ge(Li) and low energy photon (hyperpure Ge) spectrometers. These detectors were used inγγ-coincidence experiments, too. Conversion electron spectrum measurements were performed by means of a superconducting magnet transporter Si(Li) spectrometer (SMS) atE _p =4 MeV and multipolarities of some transitions have been determined. Based on the experimental results a level scheme of¹⁰⁰Tc has been constructed. Level energies of¹⁰⁰Tc were calculated on the basis of the parabolic rule, derived from the cluster-vibration model.     

Ruthenium-catalyzed azide-alkyne cycloaddition: scope and mechanism

The catalytic activity of a series of ruthenium(II) complexes in azide-alkyne cycloadditions has been evaluated. The [Cp*RuCl] complexes, such as Cp*RuCl(PPh 3) 2, Cp*RuCl(COD), and Cp*RuCl(NBD), were among the most effective catalysts. In the presence of catalytic Cp*RuCl(PPh 3) 2 or Cp*RuCl(COD), primary and secondary azides react with a broad range of terminal alkynes containing a range of functionalities selectively producing 1,5-disubstituted 1,2,3-triazoles; tertiary azides were significantly less reactive. Both complexes also promote the cycloaddition reactions of organic azides with internal alkynes, providing access to fully-substituted 1,2,3-triazoles. The ruthenium-catalyzed azide-alkyne cycloaddition (RuAAC) appears to proceed via oxidative coupling of the azide and alkyne reactants to give a six-membered ruthenacycle intermediate, in which the first new carbon-nitrogen bond is formed between the more electronegative carbon of the alkyne and the terminal, electrophilic nitrogen of the azide. This step is followed by reductive elimination, which forms the triazole product. DFT calculations support this mechanistic proposal and indicate that the reductive elimination step is rate-determining.     

Ruthenium-catalyzed cycloaddition of aryl azides and alkynes

The formation of 1,5-disubstituted 1,2,3-triazoles from aryl azides and alkynes was readily accomplished using [Cp*RuCl]4 catalyst in dimethylformamide. It was also demonstrated that the reaction provided higher yields, cleaner product, and shorter reaction times when carried out under microwave irradiation.     

Insight into the nonlinear absorbance of two related series of two-photon absorbing chromophores

A comprehensive photophysical study of the linear and nonlinear absorption properties has been carried out on two series of two-photon absorbing dyes to gain insight into how structure-property relationships influence observed nonlinear absorption. The materials studied consist of an electron accepting benzothiazole group connected to an electron donating diphenylamine via a fluorene bridging group. Two series differ from each other by the addition of one phenyl group and for each series one-arm (dipolar, AF240 and AF270), two-arm (quadrupolar, AF287 and AF295), and three-arm (octupolar, AF350 and AF380) versions were studied. Overall the AF240 series exhibits higher intrinsic two-photon absorption (TPA) cross-sections than the AF270 series as well as enhanced nanosecond nonlinear absorption, with an increase with number of branches. The enhanced nanosecond nonlinearity is understood by taking into account the contribution from the singlet and triplet excited states and was verified by a two-photon assisted excited-state absorption model that satisfactorily predicts the nonlinear absorption of the chromophores.     

Not All Fluorescent Nanodiamonds Are Created Equal: A Comparative Study

Fluorescent nanodiamonds (FNDs) are vital to many emerging nanotechnological applications, from bioimaging and sensing to quantum nanophotonics. Yet, understanding and engineering the properties of fluorescent defects in nanodiamonds remain challenging. The most comprehensive study to date is presented, of the optical and physical properties of five different nanodiamond samples, in which fluorescent nitrogen‐vacancy (NV) centers are created using different fabrication techniques. The FNDs' fluorescence spectra, lifetime, and spin relaxation time (T₁) are investigated via single‐particle confocal fluorescence microscopy and in ensemble measurements in solution (T₁ excepted). Particle sizes and shapes are determined using scanning electron microscopy and correlated with the optical results. Statistical tests are used to explore correlations between the properties of individual particles and also analyze average results to directly compare different fabrication techniques. Spectral unmixing is used to quantify the relative NV charge‐state (NV^? and NV⁰) contributions to the overall fluorescence. A strong variation is found and quantified in the properties of individual particles within all analyzed samples and significant differences between the different particle types. This study is an important contribution toward understanding the properties of NV centers in nanodiamonds. It motivates new approaches to the improved engineering of NV‐containing nanodiamonds for future applications.     

Excited-state structural dynamics of 5-fluorouracil

5-Fluorouracil is an analogue of thymine and uracil, nucleobases found in DNA and RNA, respectively. The photochemistry of thymine is significant; UV-induced photoproducts of thymine in DNA lead to skin cancer and other diseases. In previous work, we have suggested that the differences in the excited-state structural dynamics of thymine and uracil arise from the methyl group in thymine acting as a mass barrier, localizing the vibrations at the photochemical active site. To further test this hypothesis, we have measured the resonance Raman spectra of 5-fluorouracil at wavelengths throughout its 267 nm absorption band. The spectra of 5-fluorouracil and thymine are very similar. Self-consistent analysis of the resulting resonance Raman excitation profiles and absorption spectrum using a time-dependent wave packet formalism suggests that, at most, 81% of the reorganization energy upon excitation is directed along photochemically relevant modes. This compares well with what was found for thymine, supporting the mass barrier hypothesis.     

Electron paramagnetic resonance and thermoluminescence study of Ag ions in Li2B4O7 crystals

Electron paramagnetic resonance (EPR) is used to investigate the effects of ionizing radiation on Ag-doped lithium tetraborate (Li₂B₄O₇) crystals. Two similar, yet distinct, trapped-hole centers (Ag²⁺ ions substituting for Li⁺ ions) are produced by 60 kV x rays. One Ag²⁺ ion, labeled Center A, has no nearby defects and the other Ag²⁺ ion, labeled Center B, has a neighboring impurity which is most likely a Ag⁺ ion substituting for a Li⁺ ion. The production and thermal decay properties of the two Ag²⁺ ions are described and their g matrices and ¹⁰⁷Ag and ¹⁰⁹Ag hyperfine matrices are obtained from the EPR angular dependences. The principal values of the g matrices are similar for the two centers, but the hyperfine principal values differ significantly (Center B has smaller values than Center A). There are also differences in the directions of the principal axes for the two centers. Together, these results imply (1) that the unpaired spin is less localized for Center B and (2) that the ground-state positions of the neighboring oxygen ions are different for Centers A and B. This explains why the peaks of the Ag²⁺ charge-transfer photoluminescence bands associated with Centers A and B occur at different wavelengths (502 and 725 nm, respectively). An isochronal pulsed thermal anneal shows that these radiation-induced Ag²⁺ ions serve as the recombination site for the intense thermoluminescence peak observed near 152 °C.     

Influence of dissolution processing of PVA blends on the characteristics of their hydrogels synthesized by radiation—Part I: Gel fraction,swelling, and mechanical properties

In this work several hydrogels were obtained with two different poly(vinyl alcohol)s/PVAs as the main polymer in aqueous solutions containing 10% of PVA, 0.6% of agar, and 0.6% of κ-carrageenan (KC), cross-linked by gamma-rays from a ⁶⁰Co irradiation source. The PVAs tested have different degrees of hydrolysis and viscosities at 4% with values closed to 30 mPa s. The aqueous polymeric solutions were prepared using two distinct processes: the simple process of heating–stirring and that of making use of an autoclave. The purpose of this study was to evaluate the influence of the dissolution process by means of both methods on the hydrogels’ properties obtained. These were investigated by means of degree of cross-linking/gel fraction, degree of swelling in water, and some mechanical properties. The results that are obtained for hydrogels synthesized from solutions of PVA, agar, KC, and blends thereof prepared by both dissolution processes showed higher degrees of swelling for hydrogels from the autoclaved polymer solutions than those from the solutions prepared by simple heating–stirring process. Furthermore, their hydrogels containing totally hydrolyzed PVA displayed higher tensile strength and lower elongation properties.     

Well-defined (N-heterocyclic carbene)-Ag(I) complexes as catalysts for A3 reactions

The use of well-defined (N-heterocyclic carbene)-Ag(I) complexes for the A(3) reaction allows for the coupling of unactivated aldehydes at room temperature and very short reaction times.