Photometric determination of calcium with antipyrylazo III

Antipyrylazo III or diantipyrylazo (3,6-bis(4-antipyrylazo)-4,5-dihydroxy-2, 7-napthalenedisulfonic acid) forms at PH 12.7 a complex Ca₂HL with calcium. The logarithmic overall stability constant, 10g β₂₁₁, is 23.99 ±0.03 (0.1 MNaClO₄,25°C).The effective molar absorptivity is 21,500 ±100 l mole^-1 cm^-1 at 605 nm. The complex can be used for a selective photometric determination of calcium(0.25–3.50μmole) if tri-and tetravalent ions are removed by extraction with cupferron (into chloroform) and transition divalent ions are masked with sodium cyanide. Only strontium (0.5 μmole) and EDTA (0.1 μmole) interfere seriously.     

Capture-ROMP-release: application to the synthesis of amines and alkyl hydrazines

Application of a capture-ROMP-release strategy for the chromatography-free purification of Mitsunobu reaction products is described. Norbornenyl-tagged reagents are utilized for standard solution phase Mitsunobu chemistry. Post-reaction phase-switching is accomplished via in situ ring-opening metathesis polymerization (ROMP) followed by precipitation of the polymer with methanol. Release of the product from the polymer affords amines and alkyl hydrazine derivatives with good yields and purities.     

Untersuchungen über die Quellung und Löslichkeit hochmolekularer Stoffe

Zusammenfassung Das Verhalten von 17 hochmolekularen Stoffen in 64 organischen Lösungsmitteln wird untersucht. Eine Ordnung des großen Beobachtungsmaterials gelingt, wenn man den Zustand der Systeme (z. B. Lösung oder Quellung) als Funktion der Oberflächenspannung und der dielektrischen Funktion ²/ der Lösungsmittel darstellt.     

Vinyl sulfones in solid-phase synthesis: preparation of 4,5,6,7-tetrahydroisoindole derivatives

The preparation of functionalized 4,5,6,7-tetrahydroisoindole via a traceless solid-phase sulfone linker strategy is described. Thermolytic extrusion of SO(2) from polymer-bound 3-(phenylsulfonyl)-3-sulfolene (7) generated polymer-bound 2-(phenylsulfonyl)-1,3-butadiene (9) in situ which underwent Diels--Alder cycloaddition with various dienophiles to furnish vinyl sulfone resins 10-14. To complete a traceless linker cleavage strategy, (p-tolysulfonyl)methyl isocyanide or ethyl isocyanoacetate was employed to react with the vinyl sulfone moiety to liberate functionalized 4,5,6,7-tetrahydroisoindole products from the resin. Using this chemistry, nine tetrahydroisoindole derivatives (6, 15-22) were prepared in 32-41% overall yields from polystyrene/divinylbenzene sulfinate 1.     

Formation of oxygen atoms in the reaction of chlorine atoms with ozone

Oxygen atoms are detected by NO + O + M chemiluminescence as a secondary product of the reaction between Cl and O₃. The mechanism Cl + O₃ → ClO + O₂(¹Σ⁺_g), O₂(¹Σ⁺_g) + O₃ → O₂ + O₂ + O is proposed to account for the oxygen atom formation. The branching ratio to the O₂(¹Σ⁺_g) product in the reaction of Cl with O₃ is estimated to be in the range (0.1–0.5) x 10^?2.     

Micromechanics of fatigue crack propagation in glassy thermoplastics

By the aid of the optical interference method the size of the craze zone at the crack tip has been measured during fatigue crack propagation (FCP) in two glassy thermoplastics thus giving a basis to re-examine proposed models. In contrast to previous assumptions it has been found, that in PMMA of high molecular weight crack propagation occurs only during a short interval of the loading cycle when the fibrils are stretched most severely and it is not limited by crack tip blunting; between the dimensions of the craze zone and the crack advance per cycle which is also reflected by markings on the fracture surface no simple correlation has been found. In PVC first the craze grows continuously during many loading cycles up to its final size and then the crack propagates by a jump separating the craze zone only partly. Thus at all stress intensity levels investigated the length of the final craze zone has been found to be distinctly larger than the jump spacing on the fracture surface. By aid of SEM-photography it is shown that in PVC during FCP cracking occurs by separation of fibrils instead of void coalescence.     

Photoelectric evidence for a neutral excited state in fully polymerized polydiacetylene-p-(toluenesulfonate) single crystals

The intensity dependence of photocurrent transients excited by the 1.06 μ line of a Nd laser has been measured. Observation of an I² and an I³ branch indicate that charge carriers can be generated via two-quantum absorption and that at high intensities photoionization of a neutral excited state with a lifetime of the order 10^?10 s dominates.     

Seawater—A test of multicomponent electrolyte solution theories. II. Enthalpy of mixing and dilution of the major sea salts

In a continuing effort to predict the physicochemical properties of seawater from the properties of single aqueous electrolyte solutions, the pairwise heats of mixing at constant molal ionic strength,I=1.0 ional, have been determined for the six possible pairs of salts from the set (NaCl, Na₂SO₄, MgCl₂, MgSO₄) at 30°C. In addition, heats of dilution for two aqueous solutions formed from these salts and havingI=1.0 ional have been determined at 30°C. In order to present the most thermodynamically consistent results, it was found necessary to apply a correction term to the relative apparent equivalent enthalpies given in the literature at 30°C. These correction terms derived from a consideration of published results on heats of dilution at very low concentrations. Further, in order to make predictions for seawater at 25°C, it was deemed desirable to refit existing heat-capacity data. The heats relative apparent equivalent enthalpies for the two mixtures mentioned as well as for seawater. The estimates are based on the theoretical equation of Reilly and Wood for charge-asymmetric mixtures which derives from the work of Friedman. In the most applicable cases, the estimates agree with experimental relative apparent equivalent enthalpies to within 5%. In general, the results substantiate the theoretical equation.Taken in part from the Ph.D. dissertation of W. H. Leung, University of Miami, Miami, Florida 33149.     

Zur Kinetik der Spinellbildung von β-Ga2O3 mit zweiwertigen Oxiden. IV. Reaktionen 2. Art im System CoO-β-Ga2O3

The solid-state reaction of the second kind in a sandwich type diffusion couple of $\text{Co}{}_{\mathrm{1?z}}\text{Ga}{}_{\mathrm{<mtext>2z</mtext><mtext>3</mtext>}}\text{O}$ and β-Ga₂O₃ has been investigated between 1249 and 1550°C in air. The quantity z, which corresponds to the saturation concentration of β-Ga₂O₃ in CoO, was determined as a function of temperature by X-ray methods and the optical microscope; the homogeneity range of the spinel phase $\text{Co}{}_{\mathrm{1?y}}\text{Ga}{}_{\mathrm{<mtext>2+</mtext><mtext>2y</mtext><mtext>3</mtext>}}\text{O}{}_4$ was investigated also. The growth of the thickness of the reaction layer follows a parabolic rate law; the activation energy is 71.6 kcal/mole. A comparison of reaction rate constants of the first and second kind in connection with experimental results, achieved with a modified marker technique, leads to confirmation of the Wagner mechanism for the formation of CoGa₂O₄ spinel as supposed before by Laqua. Reaction rate constants of the second kind, calculated from interdiffusion profiles in CoO-β-Ga₂O₃ diffusion couples, are in good agreement with experimental values. Presented data are used for estimating interdiffusion coefficients for the CoO-β-Ga₂O₃ system according to theoretical aspects developed by Pelton, Schmalzried, and Greskovich.     

Comparison of various calibration techniques for the direct spectroscopical analysis of SiC powders

Techniques for the direct analysis of powdered advanced ceramics provide an advantageous alternative to methods using wet digestion in sample preparation. The direct spectrochemical methods based on electrothermal vaporization (ETV-ICP-OES, solid-ETV-AAS, etc.) show a great similarity to the classical method of d. c. arc excitation. The calibration procedure is the major difficulty of all techniques applied for direct solid sample analysis, as there is a lack of suitable reference materials of ceramics. Consequently, it was necessary to verify various possibilities of preparation and application of model calibration samples. The results of such a calibration are compared with those using within-laboratory standards.