Copper catalyzed atom transfer radical copolymerization of glycidyl methacrylate and 2‐ethylhexyl acrylate

This investigation reports the atom transfer radical copolymerization (ATRcP) of glycidyl methacrylate (GMA) and 2‐ethylhexyl acrylate (EHA). Poly(glycidyl methacrylate) (PGMA) has easily transformable pendant oxirane group and poly(2‐ethylhexyl acrylate) (PEHA) has very low T_g. They are the important components of coating and adhesive materials. Copolymerization of GMA and EHA was carried out in bulk and in toluene at 70 °C at different molar feed ratios using CuCl as catalyst in combination with 2,2′‐bypyridine (bpy) as well as N,N,N′,N″,N″‐pentamethyl diethylenetriamine (PMDETA) as ligand. The molecular weight (M_n) and the polydispersity index (PDI) of the polymers were determined by GPC analysis. The molar composition of the copolymers was determined by ¹H NMR analysis. The reactivity ratios of GMA (r₁) and EHA (r₂) were determined using Finemann‐Ross and Kelen‐Tudos linearization methods and those had been compared with the literature values for conventional free radical copolymerization. The thermal properties of the copolymers were studied by DSC and TGA analysis. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6526–6533, 2009     

Large amplitude free flexural vibrations of laminated composite skew plates

Here, the large amplitude free flexural vibration behaviors of thin laminated composite skew plates are investigated using finite element approach. The formulation includes the effects of shear deformation, in-plane and rotary inertia. The geometric non-linearity based on von Karman's assumptions is introduced. The non-linear governing equations obtained employing Lagrange's equations of motion are solved using the direct iteration technique. The variation of non-linear frequency ratios with amplitudes is brought out considering different parameters such as skew angle, number of layers, fiber orientation, boundary condition and aspect ratio. The influence of higher vibration modes on the non-linear dynamic behavior of laminated skew plates is also highlighted. The present study reveals the redistribution of vibrating mode shape at certain amplitude of vibration depending on geometric and lamination parameters of the plate. Also, the degree of hardening behavior increases with the skew angle and its rate of change depends on the level of amplitude of vibration.     

Synthesis,characterization, and catalytic activity of a polymer-supported copper(II) complex with a thiosemicarbazone ligand

A thiosemicarbazone Cu(II) complex anchored to a polystyrene framework has been synthesized and characterized by analytical and spectroscopic techniques. The complex was found to be a highly active catalyst for the oxidation of various organic substrates including alkenes and alcohols using H₂O₂ as oxidant. The reaction conditions were optimized with respect to temperature, solvent, oxidant, catalyst amount, and substrate to peroxide ratio. The heterogeneous catalyst was reused five times without significant loss of activity. A comparison between the catalytic activities of this polymer-supported Cu(II) complex and its homogeneous analogue was carried out.     

Biosorption of Cr(VI) ions from aqueous solutions: kinetics, equilibrium, thermodynamics and desorption studies

Cr(VI) is a major water pollutant from industrial effluent whose concentration is to be reduced within the permissible limit. Present study reports a systematic evaluation of six different natural adsorbents for the removal of Cr(VI) from aqueous solutions in batch process. The adsorption kinetic data were best described by pseudo-second order model. The values of mass transfer coefficient for Cr(VI) adsorption indicated that the velocity of the adsorbate transport from the bulk to the solid phase was quite fast. The effective diffusivity of Cr(VI) removal for all the adsorbents were of the order of 10(-10) m(2)/s which suggested chemisorption of the process. The adsorption process was jointly controlled by film diffusion and intraparticle diffusion. Maximum monolayer adsorption capacities onto the natural adsorbents used were comparable to the other natural adsorbents used by other researchers. The thermodynamic studies and sorption energy calculation using Dubinin-Radushkevich isotherm model indicated that the adsorption processes were endothermic and chemical in nature. FT-IR studies were carried out to understand the type of functional groups responsible for Cr(VI) binding process. Desorption study was carried out with different concentration of NaOH solutions. Application study was carried out using electroplating industrial wastewater.     

Structure of wake of a sharp-edged bluff body in a shallow channel flow

The flow field downstream of a bluff body in a typical open channel flow was explored by two-dimensional particle image velocimetry. Measurements are obtained in horizontal planes at the near-bed, mid-depth and near-surface locations downstream of the body up to a streamwise distance of 10D, where D is the width of the body. The dimensionless streamwise defect velocity profile of the wake flow matches well with the data of a previous investigation and does not reflect any dependency on the distance from the bed. However, the nature of development of the recirculation region is found to be different at the three vertical locations. The time-averaged streamline pattern indicates the existence of a unique nodal pattern close to the bed. The variation of the half-width is also found to be affected by the presence of the bed and the free surface. The bed friction arrests the transverse growth of the shear layer, and the free-surface helps to redistribute the turbulent kinetic energy in the streamwise and transverse directions. Swirling strength analysis is carried out to compare the behavior and statistics of the vortex population in the vertical direction. The prevailing magnitude of the swirling strength is found to be different at the three vertical locations. Bed friction assists to dissipate vorticity rapidly, and therefore reduces the probability of appearance of strong vortices close to the bed.     

Premicellar and micelle formation behavior of aqueous anionic surfactants in the presence of triphenylmethane dyes: protonation of dye in ion pair micelles

The premicellar and micelle formation behaviors of four cationic triphenylmethane dyes, viz, Pararosaniline (RN), Crystal violet (CV), Ethyl violet (EV), and Malachite green (MG), in aqueous anionic surfactant solutions of sodium dodecyl sulfate (SDS), sodium dodecyl benzene sulfonate (SDBS), and sodium dodecyl sulfonate (SDSN) have been studied by spectral and surface tension measurements. The study was carried out within a pH range where the dyes are stable in their quinoid forms. The dyes have been found to form dye–surfactant ion pairs (DSIPs) with the surfactants, at the surfactant concentrations well below their critical micelle concentration, CMC*. The DSIPs behave like nonionic surfactants and form an air–water interfacial monolayer. The DSIPs have a lower critical micelle concentration (CMC_IP), greater efficiency, and lower effectiveness than the corresponding pure surfactants. As the surfactant concentration is increased below the CMC*, the DSIPs start forming micelles of their own where the dye gets protonated and exists as a protonated dye–surfactant ion pair (PDSIP) in the ion pair micelles. As the concentration of the surfactant exceeds the CMC* of the pure surfactant, the protonation reverses gradually with the dye remaining in the micelles in solubilized form and the DSIPs in the air–water interfacial monolayer are replaced by pure surfactants. The distorted helical isomeric form (isomer B) of the dyes is favored in the PDSIPs. Copyright © 2009 John Wiley & Sons, Ltd.     

Torsion and entropy driven denaturation of DNA

A unified theory of the denaturation transition having torsion energy as the control parameter has been formulated here in the framework of the mapping of a DNA molecule onto a Heisenberg spin system. The torsion energy incorporates the torque, tension and temperature, the latter being associated with the twist angle. The denaturation transition can be mapped onto the quantum phase transition induced by a quench when the temperature effect is incorporated in the quench time and torsion takes the role of the external field. The denaturation transition occurs when the entanglement entropy of the spin system vanishes.     

Effect of structure and concentration of polymer, metal ion and pH of the medium on the fluorescence characteristics of hyperbranched polyamines

A series of hyperbranched polyamines have been prepared by the reported method. All these polyamines exhibit fluorescence at about 350-650 nm with maximum intensity at about 450 nm. The study shows that the fluorescence intensity and the range of wavelength of fluorescence are strongly influenced by the structure of the hyperbranched polyamines. The effect of concentration of the polymer, pH of the medium and metal ion has also been investigated on the fluorescence characteristics of sulfone containing hyperbranched polyamine (Ps), as it shows the best result among the studied polymers. The results show that the intensity of fluorescence increases with the decrease of concentration (5-0.1 g/L in N,N′-dimethyl sulfoxide) of polymer and with the increase of pH (3.1-11.6) of the medium. The quenching of fluorescence increases with the increase of concentration of Cu²⁺ ions (0.01-0.04%). The hyperbranched polyamine (Ps) has also been end capped with benzoyl chloride and 4-hydroxybenzaldehyde to study the influence of end groups. The results showed that the structure of end capped compounds has prominent role to influence fluorescence characteristics of this hyperbranched polyamine.     

S‐Nitrosoglutathione‐Based Nitric Oxide‐Releasing Nanofibers Exhibit Dual Antimicrobial and Antithrombotic Activity for Biomedical Applications

The novel use of nanofibers as a physical barrier between blood and medical devices has allowed for modifiable, innovative surface coatings on devices ordinarily plagued by thrombosis, delayed healing, and chronic infection. In this study, the nitric oxide (NO) donor S‐nitrosoglutathione (GSNO) is blended with the biodegradable polymers polyhydroxybutyrate (PHB) and polylactic acid (PLA) for the fabrication of hemocompatible, antibacterial nanofibers tailored for blood‐contacting applications. Stress/strain behavior of different concentrations of PHB and PLA is recorded to optimize the mechanical properties of the nanofibers. Nanofibers incorporated with different concentrations of GSNO (10, 15, 20 wt%) are evaluated based on their NO‐releasing kinetics. PLA/PHB + 20 wt% GSNO nanofibers display the greatest NO release over 72 h (0.4–1.5 × 10^?10 mol mg^?1 min^?1). NO‐releasing fibers successfully reduce viable adhered bacterial counts by ≈80% after 24 h of exposure to Staphylococcus aureus. NO‐releasing nanofibers exposed to porcine plasma reduce platelet adhesion by 64.6% compared to control nanofibers. The nanofibers are found noncytotoxic (>95% viability) toward NIH/3T3 mouse fibroblasts, and 4′,6‐diamidino‐2‐phenylindole and phalloidin staining shows that fibroblasts cultured on NO‐releasing fibers have improved cellular adhesion and functionality. Therefore, these novel NO‐releasing nanofibers provide a safe antimicrobial and hemocompatible coating for blood‐contacting medical devices.     

Thermodynamics of multi-horizon spacetimes

General Relativity and Gravitation -