Enhancement of the crystalline perfection of <0 0 1> directed KDP single crystal

<0 0 1> directed good quality potassium dihydrogen phosphate (KDP) single crystal has been grown by Sankaranarayanan–Ramasamy (SR) method with the vision to improve the crystalline perfection and efficiency. A seed crystal of diameter 25 × 15 × 3 mm³ was mounted in the ampoule, where the diameter of the ampoule was much bigger than the seed. The size of the crystal grown was 30 × 20 × 60 mm³. The obtained transparency for the crystal grown by SR method is 93% and by conventional method is 85% in the entire visible region. The HRXRD analysis indicates that the crystalline perfections of the crystals are excellent without having any very internal structural grain boundaries. The obtained FWHM for conventional method grown crystal is 12 arc s and for SR method is 6 arc s. Low dielectric loss indicates that the <0 0 1> directed crystal contains minimum defects. Higher mechanical stability was observed in SR method grown KDP compared to the other. Laser damage threshold value has been determined using Nd:YAG laser operating at 1064 nm. The optical transmission study and the powder SHG measurement show the suitability of the ingot for nonlinear optical applications.     

Thermodynamic analysis of fly ash nanofluid for automobile (heavy vehicle) radiators

Journal of Thermal Analysis and Calorimetry - On the basis of symmetry group analysis applied to fluid flow, heat and mass transfer equations for nanofluids in parabolic approximation, their...     

Electrochemical Sensing of Chemical Warfare Agent Based on Hybrid Material Silver‐aminosilane Graphene Oxide

The threat from chemical warfare agents (CWAs) imparts an alarming call for the global community not limited to human being but also extends as unprecedented environmental threat, hence, timely detection and degradation in the event of CWAs attack is very crucial. Herein, we describe a hybrid material of 3‐aminopropyltriethoxysilane (APTES) modified graphene oxide (GO) on glassy carbon (GC) electrode along with electrodeposited silver nanodendrimers (AgNDs) for the electrochemical detection and degradation of CWA sulphur mustard (HD). The AgNDs/APTES‐GO hybrid material was characterized by SEM, EDX, BET, TGA, Raman, UV‐Vis, XPS and XRD techniques. The AgNDs/APTES‐GO modified GC electrode was also characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Electrochemical studies indicated presence of electrocatalysis owing to the synergistic effect of AgNDs and GO for sensing CWA HD via reductive dehalogenation. The AgNDs/APTES‐GO modified GC electrode exhibited linearity for CWA HD from 5.3 μM to 42.4 μM. Constant potential electrolysis was performed with modified electrode and degradation products were analysed using GC‐MS, highlighting the great potential of graphene based hybrid material. This new strategy provides an opportunity for the development of “detect and destroy” system for the CWAs and other environmental toxic pollutant, which could help in mitigation of on‐ site events for first responders.     

A sensor for acetaminophen in a blood medium using a Cu(II)-conducting polymer complex modified electrode

Complexation of Cu ions in a terthiophene carboxylic acid (TTCA) polymer film resulted an enhanced anodic current for acetaminophen oxidation when compared to polymer coated and bare glassy carbon electrodes in human blood and buffer media. Scanning electron microscopy (SEM) and ESCA experiments indicate the involvement of copper in the electrocatalytic oxidation of acetaminophen. No interference was observed from other biologically important and phenolic compounds used with this modified electrode. Especially, the non-interference from N-acetylcysteine, an antidote for the treatment of acetaminophen poisoning, reveals the proposed method’s superiority in medicinal applications. In addition, the present modified electrode avoids surface fouling at higher concentrations of acetaminophen. The calibration range obtained with CV was based between 2.0×10⁻⁵ and 5.0×10⁻³ M [r²=0.997 (n=5, R.S.D.=2.5%); DL=5.0×10⁻⁶ M (S/N=3)]. The analytical utility of the modified electrode was achieved by analyzing the content of acetaminophen in different drugs without pretreatment using CV and amperometric techniques.     

Enzyme Based Electrochemical Biosensor for Ethanolamine

Enzyme based electrochemical detection method developed for chemical toxicant ethanolamine (EA). Monoamine oxidase A (MAO‐A) enzyme was used for the oxidation of EA. A direct electron transfer from the electrode to EA without any mediator with the help of MAO‐A enzyme was attained and this confirms the application of this methodology for the development of third generation biosensor for EA sensing well below the IDLH (30 ppm) value of EA. Moreover, heterogeneous rate constant (0.021s^?1) and the number of electron involved (5.2) were deduced for EA in PBS buffer. The calibration plot showed linearity 2.02×10^?4 M to 10.10×10^?4 M of EA in PBS buffer with detection limit 4.1 ppm. The modified electrodes are characterized by Raman and Electrochemical impedance spectroscopy (EIS) techniques. The outcome of this work indicates about the utility of this methodology for the sensing of EA in the environment if it is present as well as to degrade EA into other compounds without using any indicator or mediator.     

Synthesis of poly(N-vinyl-2-pyrrolidone) adsorbed-AuPt/C bimetallic nanoparticles and their unusual electrocatalytic activity towards methanol tolerant oxygen reduction reaction

Journal of Solid State Electrochemistry - It has been suggested that the presence of adsorbed impurities, such as capping agent or organic reaction products adsorbed on the metallic nanoparticles,...     

Biocidal and catalytic efficiency of ruthenium(III) complexes with tridentate Schiff base ligands

The reaction of the Schiff bases (obtained by condensing isatin with o‐aminophenol/o‐aminothiophenol/o‐aminobenzoic acid) with [RuX₃(EPh₃)₃] (where X = Cl/Br; E = P/As) in benzene afforded new, air‐stable Ru(III) complexes of the general formula [Ru(L)X(EPh₃)₂] (L = dianion of tridentate Schiff bases). In all these reactions, the Schiff base ligand replaces one triphenylphosphine/triphenylarsine and two chlorides/bromides from the ruthenium precursors. The complexes were characterized by elemental analyses, spectral (FT–IR, UV–vis, ¹H and ¹³C NMR for the ligands, and EPR) and electrochemical studies. All the metal complexes exhibit characteristic LMCT absorption bands in the visible region. The catalytic reactivity proved these complexes to be efficient catalysts in the oxidation of alcohols and C? C coupling. All the complexes were screened for their biocidal efficiency against bacteria such as Staphylococcus epidermidis and Escherichia coli and fungi such as Botrytis cinerea and Aspergillus niger at 0.25, 0.50 and 1% concentrations. Copyright © 2010 John Wiley & Sons, Ltd.     

Pd–Co alloy as an efficient recyclable catalyst for the reduction of hazardous 4-nitrophenol

Research on Chemical Intermediates - Palladium–Cobalt (Pd–Co) alloys with different atomic ratios were synthesized successfully by borohydride-assisted chemical reduction method....