The Effect of Olive Fruit Fly Bactrocera oleae (Rossi) Infestation on Certain Chemical Parameters of Produced Olive Oils

Olives affected by active and damaging infestation (olive fruit fly Bactrocera oleae (Rossi)) were assayed for their chemical composition. Biophenols were determined by HPLC, sterols, triterpenic dialcohols, and fatty acids by gas chromatography analysis. The acquired data were statistically analyzed. Oils produced from “Istrska belica” fruit affected by active infestation compared to the oils made from fruit affected by damaging infestation showed higher amounts of total oleuropein biofenols (377.3 versus (vs.) 106.6 mg/kg), total biophenols (755 vs. 377 mg/kg), lignans (85.3 vs. 32.9 mg/kg), the dialdehydic form of decarboxymethyl oleuropein aglycone (DMO-Agl-dA) (148.3 vs. 49.0 mg/kg), its oxidized form (DMO-Agl-dA)ox (35.2 vs. 8.5 mg/kg), the dialdehydic form of oleuropein aglycone (O-Agl-dA) (61.1 vs. 8.0 mg/kg), the dialdehydic form of ligstroside aglycone (L-Agl-dA) (63.5 vs. 28.0 mg/kg), the aldehydic form of oleuropein aglycone (O-Agl-A) (40.6 vs. 8.4 mg/kg), and lower amounts of tyrosol (Tyr) (6.0 vs. 13. 9 mg/kg) and the aldehydic form of ligstroside aglycone (L-Agl-A) (13.8 vs. 40.3 mg/kg). Higher values of stigmasterol (2.99%) and lower values of campesterol (2.25%) were determined in oils affected by damaging infestation; an increase in triterpenic dialcohols was also observed (3.04% for damaging and 1.62% for active infestation). Oils affected by damaging infestation, compared to active infestation, showed lower amounts of oleic acid (73.89 vs. 75.15%) and higher amounts of myristic (0.013 vs. 0.011%), linoleic (7.27 vs. 6.48%), and linolenic (0.74 vs. 0.61%) acids.     

In Vitro Evaluation of Antiproliferative Properties of Novel Organotin(IV) Carboxylate Compounds with Propanoic Acid Derivatives on a Panel of Human Cancer Cell Lines

The synthesis of novel triphenyltin(IV) compounds, Ph₃SnLn (n = 1–3), with oxaprozin (3-(4,5-diphenyloxazol-2-yl)propanoic acid), HL1, and the new propanoic acid derivatives 3-(4,5-bis(4-methoxylphenyl)oxazol-2-yl)propanoic acid, HL2, and 3-(2,5-dioxo-4,4-diphenylimidazolidin-1-yl)propanoic acid, HL3, has been performed. The ligands represent commercial drugs or their derivatives and the tin complexes have been characterized by standard analytical methods. The in vitro antiproliferative activity of both ligands and organotin(IV) compounds has been evaluated on the following tumour cell lines: human prostate cancer (PC-3), human colorectal adenocarcinoma (HT-29), breast cancer (MCF-7), and hepatocellular cancer (HepG2), as well as on normal mouse embryonic fibroblast cells (NIH3T3) with the aid of MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-12 diphenyltetrazolium bromide) and CV (crystal violet) assays. Contrary to the inactive ligand precursors, all organotin(IV) carboxylates showed very good activity with IC₅₀ values ranging from 0.100 to 0.758 µM. According to the CV assay (IC₅₀ = 0.218 ± 0.025 µM), complex Ph₃SnL1 demonstrated the highest cytotoxicity against the caspase 3 deficient MCF-7 cell line. Inductively coupled plasma mass spectrometry (ICP-MS) analysis indicated a two-fold lower concentration of tin in MCF-7 cells in comparison to platinum. To investigate the mechanism of action of the compound Ph₃SnL1 on MCF-7 cells, morphological, autophagy and cell cycle analysis, as well as the activation of caspase and ROS/RNS and NO production, has been performed. Results suggest that Ph₃SnL1 induces caspase-independent apoptosis in MCF-7 cells.     

Thermal characterization and isothermal kinetic analysis of commercial Creosote decomposition process

Isothermal decomposition process of commercial Creosote was analyzed by thermogravimetric technique in a nitrogen atmosphere, at four different operating temperatures (T = 230, 250, 270, and 290 °C). It was found that the two-parameter autocatalytic ?esták–Berggren kinetic model best describes the investigated process. It was established that the applied logistic function can successfully perform a given kinetic predictions of investigated process, at all operating temperatures. The experimental density distribution function of the apparent activation energy values was evaluated. Based of the characteristic shape of distribution curve, it was concluded that the isothermal pyrolysis of commercial Creosote represent a complex process, which probably includes primary and secondary (autocatalytic) pyrolysis reactions, together with various decomposition reactions and radicals recombination pathways.     

Direct Potentiometric Study of Cationic and Nonionic Surfactants in Disinfectants and Personal Care Products by New Surfactant Sensor Based on 1,3-Dihexadecyl−1H-benzo[d]imidazol−3-ium

A novel, simple, low-cost, and user-friendly potentiometric surfactant sensor based on the new 1,3-dihexadecyl−1H-benzo[d]imidazol−3-ium-tetraphenylborate (DHBI–TPB) ion-pair for the detection of cationic surfactants in personal care products and disinfectants is presented here. The new cationic surfactant DHBI-Br was successfully synthesized and characterized by nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR) spectrometry, liquid chromatography–mass spectrometry (LC–MS) and elemental analysis and was further employed for DHBI–TPB ion-pair preparation. The sensor gave excellent response characteristics for CTAB, CPC and Hyamine with a Nernstian slope (57.1 to 59.1 mV/decade) whereas the lowest limit of detection (LOD) value was measured for CTAB (0.3 × 10⁻⁶ M). The sensor exhibited a fast dynamic response to dodecyl sulfate (DDS) and TPB. High sensor performances stayed intact regardless of the employment of inorganic and organic cations and in a broad pH range (2−11). Titration of cationic and etoxylated (EO)-nonionic surfactant (NSs) (in Ba²⁺) mixtures with TPB revealed the first inflexion point for a cationic surfactant and the second for an EO-nonionic surfactant. The increased concentration of EO-nonionic surfactants and the number of EO groups had a negative influence on titration curves and signal change. The sensor was successfully applied for the quantification of technical-grade cationic surfactants and in 12 personal care products and disinfectants. The results showed good agreement with the measurements obtained by a commercial surfactant sensor and by a two-phase titration. A good recovery for the standard addition method (98–102%) was observed.     

Solvent viscosity dependence of the folding rate of a small protein: distributed computing study

By using distributed computing techniques and a supercluster of more than 20,000 processors we simulated folding of a 20-residue Trp Cage miniprotein in atomistic detail with implicit GB/SA solvent at a variety of solvent viscosities (gamma). This allowed us to analyze the dependence of folding rates on viscosity. In particular, we focused on the low-viscosity regime (values below the viscosity of water). In accordance with Kramers' theory, we observe approximately linear dependence of the folding rate on 1/gamma for values from 1-10(-1)x that of water viscosity. However, for the regime between 10(-4)-10(-1)x that of water viscosity we observe power-law dependence of the form k approximately gamma(-1/5). These results suggest that estimating folding rates from molecular simulations run at low viscosity under the assumption of linear dependence of rate on inverse viscosity may lead to erroneous results.     

Existence of Polyhedral Embeddings of Graphs

It is proved that the decision problem about the existence of an embedding of face-width 3 of a given graph is NP-complete. A similar result is proved for some related decision problems. This solves a problem raised by Neil Robertson. Received July 6, 1998 RID="*" ID="*" Supported in part by the Ministry of Science and Technology of Slovenia, Research Project J1–0502–0101–98.     

A two-phase algorithm for consensus building in AHP-group decision making

Group decision making through the AHP has received significant attention in contemporary research, the primary focus of which has been on the issues of consistency and consensus building. In this paper, we concentrate on the latter and present a two-phase algorithm based on the optimal clustering of decision makers (members of a group) into sub groups followed by consensus building both within sub groups and between sub groups. Two-dimensional Sammon’s mapping is proposed as a tool for generating an approximate visualization of sub groups identified in multidimensional vector space, while the consensus convergence model is suggested for reaching agreement amongst individuals in and between sub groups. As a given, all decision makers evaluate the same decision elements within the AHP framework and produce individual scores of these decision elements. The consensual scores are obtained through the iterative procedure and the final scores are declared as the group decision. The results of two selected numerical examples are compared with two sets of results: the results obtained by the commonly used geometric mean aggregation method and also the results obtained if the consensus convergence model is applied directly without the prior clustering of the decision makers. The comparisons indicated the expected differences among the aggregation schemes and the final group scores. The matrices of respect values in the consensus convergence model, obtained for cases when the decision makers are optimally clustered and when they are not, show that in the latter case the decision makers receive lower weights of respect from other members in the group. Various tests showed that our approach is efficient in cases when no clusters can be visually and undoubtedly identified, especially if the number of group members is high.