光子晶体环形腔的四波长THz滤波器

提出一种基于光子晶体环形腔的四波长THz滤波器,该滤波器在光子晶体结构中引入两个环形腔,且环形腔内部各增加一个正方形介质柱,四周各引入一个散射介质柱。应用基于时域有限差分法(FDTD)的Rsoft软件进行仿真分析,结果表明通过对内部正方形介质柱的边长、散射介质柱半径以及耦合介质柱半径等结构参数的调节,可以滤出74.813,76.98,78.168和78.883 m四个太赫兹波长。该滤波器性能优良,透过率高、Q值高、信道隔离度大,对于THz技术应用具有重要意义。     

Ultrabright AIEdots with tunable narrow emission for multiplexed fluorescence imaging

AIEgen doped fluorescent nanodots (AIEdots) have attracted lots of attention, due to their superior characteristics as fluorescent probes, such as excellent photostability, large Stokes shift, high brightness and tunable emission. Unfortunately, most of the currently available AIEdots exhibit broad emission bandwidth, which limits their applications in multiplexed fluorescence imaging and detection. In this work, the strategy of designing and fabricating narrow emissive AIEdots (NE-AIEdots) with tunable wavelengths was presented by constructing a light-harvesting system with high energy transfer efficiency. Efficient intra-particle energy transfer from highly doped AIEgens, serving as the light-harvesting antenna, to the lightly doped narrow emissive fluorophore, resulted in high brightness and narrow emission. The emission band of NE-AIEdots with the full-width-at-half-maximum varied from 18 to 36 nm was 3–6.3 times narrower than that of traditional AIEdots. The single-particle brightness of NE-AIEdots was over 5-times that of commercial quantum dots under the same excitation and collection conditions. Taking advantage of the superior performance of these NE-AIEdots, multiplexed fluorescence imaging of lymph nodes in living mice was realized, which supported the future applications of NE-AIEdots for in vivo multiplexed labeling and clinical surgery.

AIEdots with high brightness and narrow emission bandwidth were developed for multiplexed in vitro and in vivo fluorescence imaging.     

采用大口径投影光学系统监测远场散斑特征参数

大口径投影光学系统采用低成本、大口径菲涅耳透镜制作,可将远场散斑强度分布投影到CCD成像探测器上。通过CCD图像处理,能够对给定孔径上的接收功率、闪烁指数进行量化评估;在接收孔径足够大、保障散斑不会因为光束漂移效应而脱离菲涅耳透镜的条件下,该系统还可以对光束漂移和特征半径进行量化评估。同时讨论了CCD像元响应非均匀性误差及其影响、CCD辐照响应函数和图像几何投影系数的定标方法。实验表明,系统能够对激光大气传输过程中的远场散斑特征参数进行监测。特别对自由空间激光通信系统而言,可以为大气衰减和多种大气湍流效应综合作用下的中值电平慢衰落研究和检测阈值优化设计提供实验数据支撑。     

高功率微波效应的多层次多物理场协同算法

针对半导体器件、电路、电子系统的高功率微波效应,提出了一套全新的多层次多物理场协同计算方法。该算法基于半导体器件的物理结构模型,联立并求解由电磁场、半导体物理和热力学方程构成的多物理场方程组,实现了器件级高功率微波效应的仿真;通过器件多物理场仿真和电路仿真的协同计算完成电路级效应仿真;最后进行电路效应和电磁环境的协同计算,获取由多个电路、外壳封装、孔缝和线缆等组成的电子系统的高功率微波效应数据。介绍了该算法的原理和流程,以商业PIN二极管为例,计算了该器件及组成限幅器电路的温度效应、正向恢复特性、半封闭腔体内空间微波辐射等效应,通过与实验测试的对比验证了算法的正确性,同时对效应现象给出了物理机理解释。     

磁电弹复合材料和刚性导电导磁圆柱压头的二维微动接触分析

论文求解平面应变状态下磁电弹复合材料半平面和刚性导电导磁圆柱压头的二维微动接触问题.假设压头具有良好的导电导磁性,且表面电势和磁势是常数.微动接触依赖载荷的加载历史,所以首先求解单独的法向加载问题,然后在法向加载问题的基础上求解循环变化的切向加载问题.整个接触区可以分为内部的中心粘着区和两个外部的滑移区,其中滑移区满足Coulomb摩擦法则.利用Fourier积分变换,磁电弹半平面的微动接触问题将简化为耦合的Cauchy奇异积分方程组,然后数值离散为线性代数方程组,利用迭代法求解未知的粘着/滑移区尺寸、电荷分布、磁感应强度、法向接触压力和切向接触力.数值算例给出了摩擦系数、总电荷和总磁感应强度对各加载阶段的表面接触应力、电位移和磁感应强度的影响.     

Luminescence interference-free lifetime nanothermometry pinpoints in vivo temperature

Luminescence nanothermometry makes non-invasive and real-time temperature readings possible in living animals. However,the spectral fluctuation in tissues and fluids, as well as the interaction between fluorophores and environment hinders accuracy of the thermometry. Here, we report a luminescence lifetime-based nanothermometry which specifically addresses this problem. A temporal based calibration(lifetime sensing) in the NIR range, an endogenous thermal response as well as a polymer encapsulation evading environmental factors, altogether help to pinpoint temperature in vivo. Thanks to the highly condensed NdYb ions in a well-protected tiny core-shell nanocrystal(overall 11 nm), a temperature sensitivity about 2.07% K~(-1)(with 5% Yb~(3+) doped nanoparticles) and an accuracy of 0.27 K(with 25% Yb~(3+) doped nanoparticles) in biological fluids are achieved.Hopefully, combining thermally activated energy transfer nanothermometer with anti-interference lifetime thermometry would provide a more accurate temperature measurement for biological and preclinical studies.     

ZnO薄膜的椭偏和DLTS特性

用射频磁控溅射在硅衬底上淀积氧化锌薄膜,并对样品分别作氮气、空气、氧气等不同条件下退火处理。为研究退火气氛对ZnO/Si薄膜中缺陷以及折射率的影响,由深能级瞬态谱(DLTS)以及椭偏测量方法进行了检测。椭偏测量结果表明相对原始生长的样品,在氮气和空气退火使ZnO薄膜折射率下降,但氧气中退火使折射率升高。我们对折射率的这种变化机理进行了解释。DLTS测量得到一个与Zni**相关的深能级中心E1存在,氧气气氛退火可以消除E1能级。在氮气退火情况下Zn*i*的存在对抑制VO引起的薄膜折射率下降有利。     

气相色谱-负化学源质谱法对水中2-甲-4-氯和2,4-滴的测定

建立了气相色谱-负化学源质谱法(GC-NCI MS)测定水中2-甲-4-氯(MCPA)和2,4-滴(2,4-D)2种酸性除草剂的分析方法.水样经过Oasis HLB柱萃取后,进行五氟苄基溴(PFBBr)衍生化,用2,4-二氯苯乙酸(2,4-DCPA)作内标进行定量分析,并以2-甲-4-氯丙酸(mecoprop)作回收率指示物对整个分析过程进行监控,以保证分析结果的准确性.mecoprop、MCPA和2,4-D在5、100、200 ng/L 3个不同添加水平下的回收率在82% ～135%范围内,RSD在1.3% ～9.3%范围内,在1 ～200 μg/L线性范围内,相关系数r大于0.997,MCPA、2,4-D的方法检出限分别为0.60、0.45 ng/L.2007年11月采用GC-NCI MS方法对南方地区某河流中的MCPA和2,4-D含量进行调查,其质量浓度分别不大于19.4 ng/L和6.2 ng/L,监测结果表明,该河流水质没有受到MCPA和2,4-D酸性除草剂的污染.     

温度对建材中可散发甲醛含量的影响

本文采用多平衡态回归法测量了常温下密度板中可散发甲醛含量,并与国标方法萃取法所测结果进行对比.发现材料巾的可散发甲醛含量远小于萃取法所测得的总含量,说明建材中的甲醛很大一部分在常温下无法释放出来.     

多孔建材中VOC扩散系数的两尺度模型

基于对建材微观结构的分析和压汞实验,提出了预测建材中有机挥发物(VOC)扩散系数的宏观一介观两尺度模型.和传统的从压汞实验计算扩散系数方法不同的是,本模型不仅考虑了孔隙率,还对孔的尺度分布和孔的连接方式进行了研究和分析.三种不同中密度板中VOC的散发实验表明,采用新模型计算的扩散系数比文献中的传统模型更好地吻合实验数据.