硝酸钐水合物热分解过程的研究

Sm(NO_3)_3·6H_2O热分解过程的研究工作虽有文献报道,但结果不尽相同。文献[2]不同于文献[1,3],认为分解过程中存在无水盐阶段;文献[3]不同于文献[1,2],认为分解过程中存在低水合物。而且文献尚缺低水合物热分解机理的报道。我们也曾做过一些工作,但脱水阶段也不详尽。为此,我们详细地研究了Sm(NO_3)_3·nH_2O(n=     

三角波交流示波极谱的研究(Ⅰ)——示波极谱图的性质

用三角波电流代替正弦波电流,进行交流示波极谱滴定,所得示波极谱图与正弦波结果相似。对一些离子的滴定表明,两法所得结果均在定量分析允许误差范围以内。报道了三角波交流示波极谱图的一些性质。     

常见饮料中痕量铝的分光光度法研究

新试剂5-溴水杨基荧光酮可在pH5.5～6.8的六次甲基四胺缓冲溶液中,与铝,溴化十六烷基吡啶形成稳定的红色三元配合物。最大吸收波长约为568nm,摩尔吸光系数高达1.7×10~5L mol~(-1)·cm~1,常见金属离子很少干扰。据此,建立了测定微量铝的方法。其线性范围为0～6μg/25ml回收率在96％～103％之间。本文测定了常见饮茶,饮料及饮水中的微量铝。     

交流示波极谱法中if～E曲线的研究（Ⅱ）：if～E曲线的理论公式

提出利用i_f～E曲线代替常用的dE/dt～E曲线的新的交流示波极谱法,并研究了该法的基本理论,推导出i_f～E曲线的理论公式。     

Ferromagnetic ordering and metamagnetism in malonate bridged 3D diamond-like and honeycomb-like networks: [Cu(mal)(DMF)]n and [[Cu(mal)(0.5pyz)].H2O]n (mal = Malonate Dianion,DMF = N,N-dimethylformamide,pyz = Pyrazine)

Two three-dimensional (3D) malonate bridged networks, [Cu(mal)(DMF)](n) (1) and [[Cu(mal)(0.5pyz)].H(2)O](n) (2), have been synthesized in H(2)O-DMF solution. Compound 1 exhibits ferromagnetic ordering below 2.6 K (T(c)), and 2 displays a metamagnetic behavior below 3.2 K (T(N)).     

Long-range ferromagnetic ordering in two-dimensional coordination polymers Co[N(CN)2]2(L) [L = pyrazine dioxide (pzdo) and 2-methyl pyrazine dioxide (mpdo)] with dual mu- and mu3-[N(CN)2] bridges

Two novel coordination polymers of Co(II) with dicyanamide (dca) were obtained by the addition of ancillary ligands of pyrazine dioxide (pzdo) and 2-methyl pyrazine dioxide (mpdo) into the Co-dca binary system, respectively. Co[N(CN)(2)](2)(pzdo) (1) crystallizes in the orthorhombic space group of Pnnm (No. 58) with a = 9.4699(5) A, b = 14.9984(3) A, c = 7.4313(7) A, and Z = 4, while Co[N(CN)(2)](2)(mpdo) (2) is in the monoclinic space group C2 (No. 5) with a = 16.5391(4) A, b = 9.6065(2) A, c = 7.5001(2) A, beta = 105.779(1) degrees, and Z = 4. Both complexes contain similar two-dimensional triangular Co-dca layers, which offer rare examples of mixed 1,5-mu- and mu(3)-dca bridging coordination polymers with long-range ferromagnetic ordering below ca. 2.5 K.     

Polystyrene prepared by reactive extrusion: kinetics and effect of processing parameters

The conversion and residence time were investigated during the bulk polymerization of styrene in a twin screw extruder. It was found that polymerization mainly occurred in the zone between 400 and 1000 mm along the screw axis in the extruder, corresponding to the residence time of the reactants ranging from 1 to 4 min in the extruder. Furthermore, the processing conditions (feed rate, screw rotation rate) and average molecular weight of the polymer have a great effect on the residence time. Based on dimensionless analysis, a model of the residence time has been built‐up, which has been confirmed by the results of realistic measurements. A kinetic model of the polymerization has also been established under the assumption that the screw extruder can be regarded as an ideal plug flow reactor. Copyright © 2004 John Wiley & Sons, Ltd.     

The grain-boundary-related optical and electrical properties in polycrystalline p-type ZnO films

Cathodoluminescence spectra and electrical properties of the N doped and N–Al codoped p-type ZnO films and the dependence of these two properties on the post-annealing were investigated. Spectral analyses show that the intensity of the green emission strongly depends on the annealing ambient and closely relates with the width of the electron depletion region at the particle boundary. The conducting type and electrical properties of N doped and N–Al codoped ZnO films are greatly affected by the annealing process. The grain boundary effect was proposed to explain the green emission behavior and the p-type conduction in polycrystalline ZnO based films.     

Single‐Crystalline and Near‐Monodispersed NaMF3 (M=Mn,Co, Ni,Mg) and LiMAlF6 (M=Ca,Sr) Nanocrystals from Cothermolysis of Multiple Trifluoroacetates in Solution

We report the synthesis of single‐crystalline and near‐monodispersed NaMF₃ (M=Mn, Co, Ni, Mg), LiMAlF₆ (M=Ca, Sr), and NaMgF₃:Yb,Er nanocrystals (quasisquare nanoplates, nanorods, and nanopolygons) by the cothermolysis of multiple trifluoroacetates in hot combined organic solvents (oleic acid, oleylamine, and 1‐octadecene). The nanocrystals were characterized by XRD, TEM, superconductive quantum interference device (SQUID), and upconversion luminescence spectroscopy. By regulating the polarity of the dispersant, the NaMF₃ (M=Mn, Co, Ni) nanoplates were partially aligned to form nanoarrays on copper TEM grids. The sizes of the NaMF₃ nanocrystals were easily tuned by the use of proper synthetic conditions such as reaction temperature and time and solvent composition. On the basis of a series of experiments in which the reaction conditions were varied, together with GC–MS and FTIR analysis, the reaction pathways for the formation of these nanocrystals from trifluoroacetate precursors were proposed. The magnetic measurements showed that the differently sized NaMnF₃ square plates displayed interesting weak ferromagnetic behavior on the nanometer scale. The strong red upconversion luminescence emitted from the NaMgF₃:Yb,Er nanorods under 980‐nm near‐IR laser excitation suggests that NaMgF₃ may be a good candidate host material for red upconversion luminescence.