Copper(II), nickel(II), cobalt(II) and zinc(II) complexes of 2-[2-(6-methylbenzothiazolyl)azo]-5-dimethylaminobenzoic acid: synthesis,spectral, thermal and molecular modelling studies

Complexes of copper(II), nickel(II), cobalt(II), and zinc(II) with 2-[2-(6-methylbenzothiazolyl)azo]-5-dimethylaminobenzoic acid have been prepared and characterized by elemental analysis, vibrational spectra, magnetic susceptibility measurements, conductance measurements and e.p.r. spectra. Stability constants have been evaluated potentiometrically. Electronic spectra, magnetic susceptibility measurements and molecular modeling studies support a distorted square planar geometry around the metal ions. Vibrational spectra indicate the coordination of the azo group, nitrogen of benzothiazole, the carboxylate anion and the acetate ion on complexation with the metal ion. All complexes are found to be monomers. The stability of the complexes follow the order: copper(II) > nickel(II) > cobalt(II) > zinc(II).     

Cu(I) catalyst in DMF: an efficient catalytic system for the synthesis of furans from 2-(1-alkynyl)-2-alken-1-ones

The cyclization of 2-(1-alkynyl)-2-alken-1-ones 1 proceeded very smoothly in the presence of alcohols 2 with a catalytic amount of Cu(I)Br in DMF at 80 degrees C, leading to the formation of highly substituted furans 3. The catalytic system reported herein is easy to handle, compared to the previously known system wherein the reaction between 1 and 2 needed to use moisture sensitive gold(III) chloride.     

pH值对聚四氨基酞菁钴膜电化学和紫外光谱性质的影响

用循环伏安法在导电玻璃(ITO)和玻碳电极(GC)上制备了聚氨基酞菁钴(CoTAPc)修饰电极(CoTAPc/GC)。探讨了pH值对CoTAPc膜的光谱和电化学性质的影响，发现其氧化还原电位与pH值有线性关系，电催化活性也随酸度的增加而增加。CoTAPc膜的紫外吸收带变化与溶液pH值及在溶液中浸泡时间有关。     

Capillary electrophoresis with field-enhanced stacking for rapid and sensitive determination of strychnine and brucine

A new capillary electrophoresis procedure with field-enhanced stacking concentration for the analysis of strychnine and brucine is established. After optimization of the separation and concentration conditions, the two alkaloids can be separated within 5 min and quantified with high sensitivity (The detection limits were 1.0 ng mL(-1) for strychnine and 1.4 ng mL(-1) for brucine). The method was useful for qualitative and quantitative analysis of strychnine and brucine in Strychnos nux-vomica L with recovery of 105.1% for strychnine and 98.4% for brucine.     

Optical sensor for carbon dioxide combining colorimetric change of a pH indicator and a reference luminescent dye

A new optical CO₂ sensor based on the luminescence intensity change of the europium(III) complex tris(thenoyltrifluoroacetonato) europium(III) dihydrate ([Eu(tta)₃]) caused by the absorption change of various pH indicators—thymol blue, phenol red, or cresol red—with CO₂ was developed and its CO₂ sensing properties were investigated. For all the CO₂ sensors using pH indicators the observed luminescence intensity from [Eu(tta)₃] at 613 nm increased with increasing CO₂ concentration. The linear calibration method based on the plot of (I₁₀₀–I₀)/(I–I₀) versus the inverse of CO₂ concentration was suggested, where I₀ and I₁₀₀ were luminescence intensities at 613 nm of the CO₂ sensor film in 100% nitrogen and 100% gaseous CO₂. In all cases the plots showed good linearity and the correlation factors of the plots, r², were 0.991 for thymol blue, 0.990 for phenol red, and 0.998 for cresol red. The slopes of the plots (A/B) for thymol blue, phenol red, and cresol red were 2.2, 5.2, and 9.0%, respectively. The response times of the CO₂ sensor film were 4.0 s for thymol blue, 4.4 s for phenol red, and 8.8 s for cresol red for switching from nitrogen to CO₂, and the recovery times of films were 36 s for thymol blue, 39.2 s for phenol red, and 56.6 s for cresol red for switching from CO₂ to nitrogen. The signal changes were fully reversible and hysteresis was not observed during the measurements. The highly sensitive CO₂ sensor was developed using thymol blue as an indicator for the CO₂-sensing probe.     

己烯在Ru(1010)表面价带电子特性研究

在200 K以下己烯（C6H12）可以在Ru()表面上以分子状态稳定吸附.偏振角分辨紫外光电子谱（ARUPS）结果表明,己烯分子在垂直于衬底表面并沿衬底表面<>晶向的平面内,己烯分子的轴向沿<>晶向倾斜.随着衬底温度的提高,到200 K以上,己烯分解生成新的碳氢化合物.己烯分解后,πCH分子轨道能级向高结合能方向移动了0.2 eV,同时己烯中C的1s能级向低结合能方向移动了 0.3 eV.     

有机/无机杂化材料担载季铵盐催化剂的制备及其在相转移催化反应中的应用

利用溶胶-凝胶(S0l-gel)技术制备了新型的有机／无机杂化材料担载的季铵盐催化剂。优化了制备方法、反应条件等多种因素；考察了其作为相转移催化剂在1-溴代正庚烷与碘化钾的亲核取代反应中的应用，转化率最高可达到95％。     

Decontamination of radioactive cesium from natural NaCl by amide-type open-chain crown ethers

An attempt has been made to develop a radiochemical methodology for the decontamination of a trace amount of radioactive cesium from a bulk amount of natural NaCl by liquid-liquid extraction (LLX). Open chain crown ethers, of amide type, namely, N,N,N",N"-tetraphenyl-3,6-dioxaoctanediamide (TDD), N,N,N",N"-tetraphenyl-3,6,9-trioxaundecanediamide and N,N"-dinaphthyl-N,N"-diphenyl-3,6-dioxaoctanediamide (DDD) have been chosen for this purpose. The separation factor between Cs and Na is the highest when 10^-4M TDD dissolved in nitrobenzene is used as extractant and 0.4M picric acid at pH 5.0 is used as aqueous phase. About 60% Cs is extracted in this condition in a single run.     

Solid-phase extraction–spectrophotometric determination of uranium(VI) in natural waters

A method for the extraction and determination of uranyl ion in natural waters using octadecyl bonded silica membrane disks modified with piroxicam and spectrophotometry with arsenazo(III) is proposed. The perconcentration step was studied with regard to experimental parameters such as amount of extractant, type and amount of eluent, pH, flow rates and tolerance limit of diverse ions on the recovery of uranyl ion. The limit of detection of the proposed method is 0.4 micro g L(-1) of uranyl. The method was applied to the recovery of uranyl from different water samples.     

Ni-B和Ni-Ce-B超细非晶态合金的退火晶化及其催化性能

 采用XAFS,XRD和DTA方法研究了Ni－B和Ni－Ce－B超细非晶态合金在退火过程中的结构变化及其结构与催化性能的关系．活性结果表明,在退火温度为623K时,Ni－B和Ni－Ce－B样品的苯加氢催化反应转化率最高,分别为63％和81％,0．3％Ce的掺入提高了Ni－Ce－B的催化活性．DTA结果表明,Ni－B超细非晶态合金在598和653K有两个晶化峰,而Ni－Ce－B样品有548,603,696和801K四个晶化峰．XAFS和XRD结果进一步说明,在573K退火时,Ni－B样品晶化生成晶态Ni3B和纳米晶Ni,此时Ni－Ce－B仅有少量晶态Ni3B生成．在673K退火时,Ni－B样品中的Ni3B开始分解生成晶态Ni,同时纳米晶Ni聚集并形成大颗粒晶态Ni,而Ni－Ce－B样品晶化生成晶态Ni3B和纳米晶Ni．在773K和更高的温度退火处理后,Ni－B样品中Ni的局域环境结构与金属Ni箔基本一致,但Ni－Ce－B样品晶化生成的Ni晶格有较大畸变,同时Ni3B并未分解．说明0．3％的Ce对提高Ni－Ce－B样品的稳定性有显著作用．本文首次报道了Ni－B和Ni－Ce－B超细非晶态合金中苯加氢催化活性中心为纳米晶Ni和类似于金属Ni的Ni－B非晶态合金．