Rotational spectrum, potential energy surface, and bound states of the weakly bound complex He-N2O

Pure rotational transitions of the weakly bound complex He-N(2)O and three minor isotopomers (He-(14)N(15)NO, He-(15)N(14)NO, and He-(15)N(15)NO) were measured in the frequency region from 6 to 20 GHz. Predictions for the microwave transition frequencies were based on the infrared work by Tang and McKellar [J. Chem. Phys. 117, 2586 (2002)]. In the case of (14)N containing isotopomers, nuclear quadrupole hyperfine structure of the rotational transitions was observed and analyzed. The resulting spectroscopic parameters were used to determine geometrical and dynamical information about the complex. An ab initio potential energy surface was calculated at the coupled cluster level of theory with single and double excitations and perturbative inclusion of triple excitations. This surface was constructed using the augmented correlation consistent polarized valence triple zeta basis set for all atoms with the inclusion of bond functions for the van der Waals bond. Bound state calculations were done to determine the energies of low-lying rovibrational levels that are supported by the potential energy surface. The resulting transition energies agree with the experimental values to 1% or better.     

Bond dissociation energies and bond orders for diatomic alkali halides

The bond dissociation energies for Alkali halides have been estimated based on the derived relations: $$\begin{gathered} D_{AB} = \bar D_{AB} + 31.973{\text{ e}}^{0.363\Delta x} {\text{ and}} \hfill \\ D_{AB} = \bar D_{AB} (1 - 0.2075\Delta xr_e ) + 52.29\Delta x, \hfill \\ \end{gathered} $$ where \(\bar D_{AB} = (D_{AA} \cdot D_{BB} )^{{1 \mathord{\left/ {\vphantom {1 2}} \right. \kern-0em} 2}} \) , Δx represents Pauling electronegativity differences x(_A ?x_B) and r _e is the internuclear distance. A simplified formula relating bond orders, q, to spectroscopic constants is suggested. The formula has the form q = 1.5783 × 10^?3 (ω _e ² r_e/ B_e)^1/2. The ambiguity arising from the Parr and Borkman relation is discussed. The present study supports the view of Politzer that q/(0.5r _e)² is the correct definition of bond order. The estimated bond energies and bond orders are in reasonably good agreement with the literature values. The bond energies estimated with the relations we suggested, for alkali halides give an error of 4.5% and 5.3%, respectively. The corresponding error associated with Pauling's equation is 40.2%.     

Synthesis of a tetraazacyclotetradecadiene and a pentaazacyclotetradecatriene

Useful procedures for preparing a novel tetraazacyclotetradecadiene and a pentaazacyclotetradecatriene are reported. J. Heterocyclic Chem., 14, 1097 (1977)     

o-hydroxylmethylphenylchalcogens: synthesis, intramolecular nonbonded chalcogen...OH interactions, and glutathione peroxidase-like activity

[Structure: see text]. The synthesis and characterization of a series of organochalcogen (Se, Te) compounds derived from benzyl alcohol 13 are described. The synthesis of the key precursor dichalcogenides 15, 22, and 29 was achieved by the ortho-lithiation route. Selenide 18 was obtained by the reaction of the dilithiated derivative 14 with Se(dtc)2. Oxidation of 15 and 22 with H2O2 afforded the corresponding cyclic ester derivatives 17 and 24, respectively. Oxidation of selenide 18 with H2O2 affords the spirocyclic compound 19. The presence of intramolecular interactions in dichalcogenides 15 and 22 has been proven by single-crystal X-ray studies. The cyclic compounds 17 and 19 have also been characterized by single-crystal X-ray studies. GP(X)-like antioxidant activity of selenium compounds has been evaluated by the coupled bioassay method. Density functional theory calculations at the mPW1PW91 level on ditelluride 22 have identified a fairly strong nonbonding interaction between the hydroxy oxygen and tellurium atom. The second-order perturbation energy obtained through NBO analysis conveys the involvement of n(O) --> sigma(Te-Te) orbital overlap in nonbonding interaction. Post wave function analysis with the Atoms in Molecules (AIM) method identified distinct bond critical point in 15 and 22 and also indicated that the nonbonding interaction is predominantly covalent. Comparison between diselenide 15 and ditelluride 22 using the extent of orbital interaction as well as the value of electron density at the bond critical points unequivocally established that a ditelluride could be a better acceptor in nonbonding interaction, when the hydroxy group acts as the donor.     

Grafting of monosaccharide derivatives to cellulose acetate

Grafting of 1,2-O-isopropylidene-α-D -xylofuranose to commercial cellulose diacetate has been accomplished by using a boron trifluoride catalyst. The reaction proceeds quickly at 25 and 40°C, resulting in degrees of molar substitution (MS) of 0.37 and 0.34, respectively. If monomer and catalyst are added over an extended period of time to maintain low concentrations, MS values as high as 0.89 and 0.85 are obtained at 25 and 40°C, respectively. Major side reactions are depolymerization of the cellulose acetate backbone and grafted D -xylose and the homopolymerization of the monomer. These side reactions may be minimized by conducting the reaction at 40°C for a short time or by adding monomer and catalyst over an extended period of time. Grafting has also been accomplished by using D -xylose derivatives with various reactive groups at the anomeric carbon atom. The grafted material of MS greater than 0.7 is insoluble in acetone and after deacetylation is soluble in water under alkaline, neutral and acidic conditions. Oxalic acid hydrolysis of the deacetylated material indicates that most of the grafted D -xylose units are in the furanose form. Methylation and hydrolysis of the methylated material shows that 75% of the D -xylose residues are terminal units and indicates the presence of many singly grafted D -xylose residues and a few di-and trisaccharide grafts.     

Investigation of the reactions of fluorinated isatins and N-acetylisatins with thiocarbohydrazide: Synthesis of a novel spiro system: 2-oxo-1′,2′,4′,5′-tetrahydrospiro[3H-indole-3,3′-1,2,4,5-tetrazine]-6′-thione

A novel system 2-oxo-1′,2′,4′,5′-tetrahydrospiro[3H-indole-3,3′-1,2,4,5-tetrazine]-6′-thione has been synthesized by the treatment of fluorinated isatins with thiocarbohydrazide in aqueous ethanolic medium. Under exactly similar conditions, N-acetylisatin gave exclusively thiocarbohydrazone. The spiro product, on treatment with acetic acid, gave fluorinated isoindigo. Characterization of these products have been done by elemental analyses, ir, pmr and mass spectral studies.     

Spectrophotometric determination of platinum with substituted pyrimidine-2-thiol

The yellow complex of Pt(IV) with 1-pyridyl-4,4,6-trimethyl-1H,4H-pyrimidine-2-thiol (PyTPT) which has maximum absorbance at 430 nm, is studied for the spectrophotometric determination of the metal. Molar absorptivity is 5000 liters mol^?1 cm^?1 and Sandell's sensitivity is 0.039 μg/cm². The determination of Pt(IV) (2.8–8.4 ppm) in the presence of diverse ions is described.     

A study of 1O2 production by immobilized sensitizer outside the solution. Measurement of 1O2 generation

Abstract— Recently, a new technique of ¹O₂ generation has been described by Midden and Wang. The sensitizer is immobilized on silica gel particles which are attached on one surface of a glass plate which is placed, sensitizer-side down, above a solution leaving a small air space between the sensitizer and the solution. Applying the principle of the technique, i.e. generation of ¹O₂ in the gas phase above the solution, we first improved the long-term stability of the dye (rose bengal) by using double stock transparent tape instead of rubber cement. Under these conditions, although the initial rate of production was higher in rubber cement, the rate of production reached a plateau after 30 min, whereas with double stick transparent tape, the rate of generation was linear up to 100 min. This result was explained by the fact that silica glass beads are embedded in the cement which could lead to the bleaching reaction of the dye. Different reactions have been investigated, the bleaching of N,N-dimethyl-4-nitrosoaniline (RNO) in the presence of imidazole, destruction of anthracenedipropionic acid, formation of a stable nitroxide from a sterically hindered secondary amine and the influence of pH on the nitroxide yield. The yield was measured to be 5 × 10¹² molecules of singlet oxygen produced per second per cm² from the surface of the plate using the RNO bleaching reaction. This method of generating ¹O₂ also seems promising for studying the killing of mammalian cells by ¹O₂ as the sole damaging species.     

Nonperturbative modeling of two-photon absorption in a three-state system

The physics of the two-photon absorption process is investigated for a three-state system. The density-matrix equations for the two-photon interaction are solved in the steady-state limit assuming that the pump laser radiation is monochromatic. Collisional broadening, saturation, and Stark shifting of the two-photon resonance are investigated in detail by numerical solution of the steady-state density-matrix equations. Analytical expressions for the saturation intensity and the Stark shift are derived for the case where the single-photon transitions between the intermediate state and the initial and final states are far from resonance with the pump laser. For this case, it is found that the direction of the Stark shift is dependent on the relative magnitudes of the dipole-moment matrix elements for the single-photon transitions that couple the intermediate state with the initial and final states. Saturation and Stark shifting are also investigated for the case where the single-photon transitions between the intermediate state and the initial and final states are close to resonance with the pump laser.     

Approaching exponential growth with a self-replicating peptide

Self-replicating peptide systems hold great promise for a wide range of technological applications, as well as to address fundamental questions pertaining to the molecular origins of life. The development of self-replicating compounds capable of high efficiency, however, has remained elusive. Here we disclose a successful strategy whereby modulation of coiled-coil stability results in remarkable catalytic efficiency for self-replication. By shortening the peptide to the minimum length necessary for coiled-coil formation a highly efficient self-replicating system was obtained due to very low background reaction rates, bringing the efficiency close to naturally occurring enzymes.