Toward breast cancer resistance protein (BCRP) inhibitors: design, synthesis of a series of new simplified fumitremorgin C analogues

In this study, we report the design and synthesis of a series of new simplified fumitremorgin C analogues. The preliminary biological study indicated some of these simplified fumitremorgin C might be developed into breast cancer resistance inhibitors.     

从头计算方法比较TiSi_2的C54相和C49相

采用平面波超软赝势描述多电子体系,利用密度泛函理论和广义梯度近似,计算出C54相和C49相TiSi2的晶格常数、体弹性模量、形成能、电子态密度(DOS)和Mulliken电荷布居等性质.通过比较这两种物质的性质,发现尽管两者形成能很相近,但C49相结构对称性差、体弹性模量小、熔点低,Ti原子d轨道的反键强、离子性弱.这些性质上的差异和C49相TiSi2在固相反应中优先形成有关.     

一种含有亚微米孔洞的新型微孔磷酸盐晶体材料的合成及其生长机理

采用水热法成功地合成了一种含有亚微米级孔洞的微孔磷酸盐晶体材料(记为HAP-TAP),其形貌特征是:六棱柱形的晶体表面分布着大量0.4～0.8μm的亚微米级孔洞,孔洞内长有片层状晶体.在样品晶化的过程中,通过控制合成时间,获得了纯六棱柱形晶体的大单晶(记为HAP).使用扫描电子显微镜(SEM)、粉末X射线衍射(XRD)、红外光谱和电子能谱(EDX)对HAP-TAP独特形貌的形成机理进行了研究和揭示.HAP的单晶XRD数据表明,HAP是一种具有二维空旷骨架结构的新型微孔磷酸铝晶体,其分子式为Al5(OH)2(PO4)7(C2N2H10)3.0.5H2O.EDX分析结果表明,生长于六棱柱形晶体孔洞内的片层状晶体为磷酸钛铝材料.     

镍氢动力电池用AB5型贮氢合金热处理工艺的研究

本文对镍氢动力电池用AB5型纳米晶贮氢合金热处理工艺进行了研究.分别采用X射线衍射、金相、PCI测试手段分析热处理后贮氢合金的微观结构与吸放氢动力学性能.贮氢合金的电性能测试结果表明,经过950℃×6 h热处理的贮氢合金,10C放电比容量可以达到241mAh/g,循环寿命大于500次,分别以7C,10C放电,高倍率放电率(HRD)为92.5%,85.2%.将贮氢合金粉组装成电池进行测试,2min后,放电平台电压为1.143V,以10C放电,300次循环后,电池容量衰减率较小.     

Design of coordination polymer as stable catalytic systems

Here we report the first example of catalytic metallogels, which are formed irreversibly in dimethylsulfoxide via the creation of cross-linked, three-dimensional coordination polymer networks by using transition-metal ions with multiple sites available for coordination and multidentate ligands. Conformational flexibility of the ligands and slow formation of the coordination polymers apparently favor the gelation. These metallogels are stable in water and most organic solvents and can catalyze the oxidation of benzyl alcohol to benzaldehyde by using their PdII moieties as the catalytic centers. The best catalytic turnover of the metallogel is twice that of [Pd(OAc)2] under similar reaction conditions.     

环氧乙烷和环氧丙烷共聚体系的等温结晶和熔融

环氧乙烷（ＥＯ）和环氧丙烷（ＰＯ）共聚体系的等温结晶前期符合Ａｖｒａｍｉ方程。ＰＯ组分含量增加，Ａｖｒａｍｉ指数ｎ值由１．８到２．４，体系的结晶生长速率与共聚体系的组成和结晶度有关，ＥＯ／ＰＯ共聚体系的平衡熔点随ＰＯ含量的增加而降低。随Ｔｃ增大，△Ｈｍ与△Ｓｍ呈线性降低。     

双功能催化剂体系作用下乙烯二聚和共聚合的研究

用乙烯为原料在双功能催化剂体系的作用下通过二聚和共聚合反应，直接合成线性低密度聚乙烯（ＬＬＤＰＥ）．所用二聚反应催化剂为钛酸正丁酯（Ｔｉ（ＯＢｕ）_４），共聚催化剂为ＴｉＣｌ_４／ＭｇＣｌ_２（ＺＭ－１催化剂）．研究了二聚反应动力学行为及影响双功能催化剂体系动力学过程的一些因素．结果表明利用这两种催化剂组成双功能催化剂体系能够很方便地制得密度范围在０．９０－０．９３，Ｅｔ／１０００Ｃ在１０－４０的ＬＬＤＰＥ．     

2-苯基-4,5-二(2''''-吡啶基)咪唑的合成

以苯甲醛和1,2-(2'-吡啶基)-乙二酮为原料,用德布斯法合成了未见报道的2-苯基-4,5-二(2'-吡啶基)咪唑,收率31%,其结构经1H NMR, IR和MS表征.     

High-throughput purification of combinatorial libraries I: a high-throughput purification system using an accelerated retention window approach

We have developed a high-throughput purification system to purify combinatorial libraries at a 50-100-mg scale with a throughput of 250 samples/instrument/day. We applied an accelerated retention window method to shorten the purification time and targeted one fraction per injection to simplify data tracking, lower QC workload, and simplify the postpurification processing. First, we determined the accurate retention time and peak height for all compounds using an eight-channel parallel LC/UV/MS system, and calculated the specific preparative HPLC conditions for individual compounds. The preparative HPLC conditions include the compound-specific gradient segment for individual compounds with a fixed gradient slope and the compound-specific UV or ELSD threshold for triggering a fraction collection device. A unique solvent composition or solvent strength was programmed for each compound in the preparative HPLC in order to elute all compounds at the same target time. Considering the possible deviation of the predicted retention time, a 1-min window around the target time was set to collect peaks above a threshold based on UV or ELSD detection. Dual column preparative instruments were used to maximize throughput. We have purified more than 500 000 druglike compounds using this system in the past 3 years. We report various components of this high-throughput purification system and some of our purification results.     

A New Asterosaponin from the Starfish Culcita novaeguineae

A new asterosaponin named novaeguinoside A, along with a known saponin, asteronyl pentaglycoside sulfate, was isolated from the starfish Culcita novaeguineae. The new compound was identitied to be sodium 6α-O-{β-D-fucopyranosyl-(1→2)-β-D-fucopyranosyl-(1→4)-[β-D-quinovopyranosyl-(1→2)]-β-D-xylopyranosyl-(1→3)-[β-D-quinovopyranosyl}-5α-pregn-9(11)-en-20-one-3β-yl-sulfate by extensive spectral analysis and chemical evidence.