Chemical and biologically active constituents of <Emphasis Type="Italic">Salsola collina</Emphasis>

A new natural product (N-acetyltryptophan), together with 22 known constituents, including seven alkaloids, six flavonoids, six organic acids, and other compounds, were isolated from Salsola collina Pall. Their structures were elucidated on the basis of chemical reaction and spectral evidence. Among the isolated compounds, N-acetyltryptophan (8) showed moderate inhibition of a-amylase activity, and terrestric acid (9) showed positive antifungal activity.     

Development of Dispersive Liquid‐Liquid Microextraction Based on Solidification of Floating Organic Drop for the Determination of Trace Cobalt in Water Samples

A liquid‐phase microextraction technique was developed using dispersive liquid‐liquid microextraction based on solidification of floating organic drop combined with flame atomic absorption spectrometry, for the extraction and determination of trace amounts of cobalt in water samples. Microextraction efficiency factors, such as the type and volume of extraction and dispersive solvents, pH, extraction time, the chelating agent amount, and ionic strength were investigated and optimized. Under optimum conditions, an enrichment factor of 160 was obtained from 10.0 mL of water sample. The calibration graph was linearin the range of 1.15‐110 μg L^?1 with a detection limit of 0.35 μg L^?1. The relative standard deviation for ten replicate measurements of 10 and 100 μg L^?1 of cobalt were 3.26% and 2.57%, respectively. The proposed method was assessed through the analysis of certified reference water or recovery experiments.     

RP-LC Determination of Residual Monomers in Polycarboxylate Superplasticizers

A procedure was developed for the determination of residual monomers in polycarboxylate superplasticizer by reversed-phase high performance liquid chromatography. Seven kinds of residual monomers were quantitatively determined on a SinoChrom ODS-BP (C18) column and UV detector at 205 nm. The mobile phases which were used to determine micromolecular monomers were composed of acetonitrile and phosphate buffer solution (0.05 mol L^?1, pH = 3) in the ratio of 8:92 (v/v). While the mobile phases for long side-chain monomers testing were composed of acetonitrile and phosphate buffer solution (0.05 mol L^?1, pH = 6.5) in the ratio of 40:60 (v/v). The linear response ranged from 4.0 × 10^?6?C2.0 × 10^?3 mol L^?1. The detection limit was 0.12 × 10^?5?C0.8 × 10^?5 mol L^?1. Determination of real samples showed that relative standard deviation of high conversion rate samples was 3.1?C8.7% and standard addition recovery ratio was 91.5?C102.8%. While the relative standard deviation of low conversion rate samples was less than or close to 1% and the standard addition recovery ratio was 96.3?C103.1%.     

ent‐Kaurane Diterpenes and Further Constituents from Wedelia trilobata

Two new ent‐kaurane diterpenes, wedelidins A ( 8 ) and B ( 9 ), together with eighteen other constituents, including the sesquiterpenoids 1 and 2 , ent‐kaurane diterpenes 3 – 7 , triterpenoids 10 and 11 , steroids 12 – 14 , and flavonoids 15 – 17 as well as benzene derivatives 18 – 20 , were isolated from the aerial parts of Wedelia trilobata. The structures of wedelidins A ( 8 ) and B ( 9 ) were elucidated by extensive spectroscopic analyses (including UV, IR, NMR, and MS). Furthermore, the structures of compounds 2 and 3 were confirmed by X‐ray single‐crystal diffraction analyses.     

Analysis of therapeutic peptides in human urine by combination of capillary zone electrophoresis-electrospray mass spectrometry with preparative capillary isotachophoresis sample pretreatment

The presented study deals with the off-line coupling of preparative isotachophoresis (pITP) with on-line combination of capillary zone electrophoresis with electrospray mass spectrometric detection (CZE-ESI-MS) used for the analysis of therapeutic peptides (anserine, carnosine, and buserelin) in complex matrix (urine). Preparative capillary isotachophoresis, operating in a discontinuous fractionation mode in column-coupling configuration, served as a sample pretreatment technique to separation, and fractionation of mixture of therapeutic peptides present in urine at low concentration level. The fractions isolated by pITP procedure were subsequently analyzed by capillary zone electrophoresis with electrospray mass spectrometric detection. Acetic acid at 200 mmol L(-1) concentration served as background electrolyte in CZE stage and it is compatible with MS detection in positive ionization mode. In pITP fractionation procedure, sodium cation (10 mmol L(-1) concentration) as leading ion and beta-alanine as terminating ion (20 mmol L(-1) concentration) were used. While using CZE-ESI-MS, the limits of detection were 0.18 μg mL(-1) for carnosine, 0.17 μg mL(-1) for anserine and 0.64 μg mL(-1) for buserelin in water and 0.19 μg mL(-1) for carnosine, 0.50 μg mL(-1) for anserine and 0.74 μg mL(-1) for buserelin in 10 times diluted urine, respectively. The cleaning power of pITP sample pretreatment was proved as the peptides provided the higher MS signals at lower concentration levels resulting from the minimized matrix effects. The quality of obtained MS/MS spectra was very good so that they can provide information about the structure of analytes, and they were used for verification of the analytes identities. The pITP pretreatment improved the detection limits of the analyzed therapeutic peptides at least 25 times compared to the CZE-ESI-MS itself.     

Facile fabrication of amphiphilic gold nanoparticles with V-shaped brushes from block copolymers with a trithiocarbonate group as the junction

Amphiphilic gold nanoparticles grafted with V-shaped brushes (Au-V-brushes) were prepared by grafting a polystyrene-b-poly(ethylene oxide) (PS-b-PEO) block copolymer with a trithiocarbonate group as the junction to the Au surface. The obtained Au-V-brushes were subjected to solubility test and UV-vis, FT-IR, TEM and DLS characterizations. It is found that the Au-V-brushes are soluble in both water and organic solvents. In the common solvent DMF, the size of the Au-V-brushes is about 17 nm, whereas in selective solvents (toluene and water) aggregates of 70-90 nm are formed. Phase transfer of the Au-V-brushes from the water phase into the toluene phase occurs upon addition of Na(2)SO(4) into water and the Au-V-brushes can also transfer from the toluene phase to the interface of toluene and water phases after addition of citric acid in the water phase.     

Construction and deconstruction of multilayer films containing polycarboxybetaine: effect of pH and ionic strength

The influences of pH and NaCl concentration of dipping solutions and the pH and NaCl concentration of disintegration solutions on the disintegration behaviors of poly(4-vinylpyridiniomethanecarboxylate) (PVPMC)/poly(sodium 4-styrenesulfonate) (PSS) (PVPMC/PSS) multilayer films were investigated by ultraviolet-visible spectroscopy (UV-vis), Fourier transform infrared spectroscopy (FT-IR), quartz crystal microbalance (QCM) and atomic force microscopy (AFM). It was found that the disintegration rates and degrees of PVPMC/PSS multilayer films in neutral water could be well controlled by changing pH of dipping solutions and immersion time during the disintegration process. Furthermore, PVPMC/PSS multilayer films could be disintegrated completely and rapidly in pH 8 alkali solution or physiological condition (i.e., 0.15 M NaCl solution). The controllable disintegration of PVPMC/PSS multilayer films was then utilized to fabricate PEC/PSS free-standing multilayer films, in which PEC was a positively charged polyelectrolyte complex made from excessive poly(diallyldimethylammonium) (PDDA) and PSS. The experimental results indicated that the disintegration rates of PVPMC/PSS sacrificial sublayer strongly affected the integrity of the resultant PEC/PSS free-standing multilayer films. Only free-floating PEC/PSS was released from neutral water by disintegrating PVPMC/PSS multilayer sublayers. However, large size flat and tube-like PEC/PSS free-standing multilayer films with good mechanical properties were obtained facilely from pH 8 alkali solution and 0.15 M NaCl solution, respectively. The preparation of such free-standing films at physiological condition may be useful in the biological or medical application.     

Facile patterning of upconversion NaYF4:Yb,Er nanoparticles

Different kinds of highly ordered patterns of NaYF(4):Yb,Er nanoparticles on gold substrates were fabricated using a simple method combining micro-contact printing and "breath figures" techniques. Ordered arrays of water droplets were first formed in the hydrophilic regions of patterned self-assembled monolayers (SAMs). This was subsequently submerged in a chloroform solution of NaYF(4):Yb,Er nanoparticles. The particles were spontaneously assembled at the interface of chloroform/water droplet surface, leading to different kinds of uniform patterns after solvent evaporation. The structures of NaYF(4):Yb,Er particles patterns depended on the dimension of the substrate, the concentration of the NaYF(4):Yb,Er nanoparticles and the water condensation process.     

Palladium complexes affect the aggregation of human prion protein PrP106-126

Many neurodegenerative disorders are induced by protein conformational change. Prion diseases are characterized by protein conformational conversion from a normal cellular form (PrP(C)) to an abnormal scrapie isoform (PrP(Sc)). PrP106-126 is an accepted model for studying the characteristics of PrP(Sc) because they share many biological and physiochemical properties. To understand how metal complexes affect the property of the prion peptide, the present work investigated interactions between Pd complexes and PrP106-126 based on our previous research using Pt and Au complexes to target the peptide. The selected compounds (Pd(phen)Cl(2), Pd(bipy)Cl(2), and Pd(en)Cl(2)) showed strong binding affinity to PrP106-126 and affected the conformation and aggregation of this active peptide in a different binding mode. Our results indicate that it may be the metal ligand-induced spatial effect rather the binding affinity that contributes to better inhibition on peptide aggregation. This finding would prove valuable in helping design and develop novel metallodrugs against prion diseases.     

Porous ZnCo2O4 nanowires synthesis via sacrificial templates: high-performance anode materials of Li-ion batteries

A simple microemulsion-based method has been developed to synthesize ZnCo(2)(C(2)O(4))(3) nanowires that can be transformed to porous ZnCo(2)O(4) nanowires under annealing conditions. The morphology of porous ZnCo(2)O(4) nanowires can be tuned by the initial ZnCo(2)(C(2)O(4))(3) nanowires and the annealing temperatures. The as-synthesized porous ZnCo(2)O(4) nanowires have been applied as anode materials of Li-ion batteries, which show superior capacity and cycling performance. The porous one-dimensional (1D) nanostructures and large surface area are responsible for the superior performance. Moreover, it is indicated that porous ZnCo(2)O(4) nanowires synthesized at low annealing temperature (500 °C) show larger capacity and better cycling performance than that prepared at high annealing temperature (700 °C), because of their higher porosity and larger surface area.