MOFs/水凝胶复合材料的制备及其应用研究

金属有机框架(MOFs)具有大量的孔隙结构和活性位点,在气体吸附、催化、医疗等领域均发挥了巨大的作用。MOFs是晶体粉末,具有脆性较大、在水中易分解和不易回收等缺点,从而限制了其应用。通过MOFs与柔性高分子的复合,特别是与水凝胶的复合,极大地改善了复合材料的柔顺性、可回收和可加工性等特性,进一步拓宽了MOFs的应用领域。本文详细阐述了基于水凝胶MOFs原位生成法、MOFs /水凝胶同时生成法和水凝胶包裹MOFs法等三种不同方法制备MOFs/水凝胶复合材料的研究进展,并对上述三种制备方法的特点及其产物特征进行了总结,进一步归纳了复合材料在生物医药、催化、废水处理和气体吸附等领域的应用。最后,对MOFs/水凝胶复合材料制备方法的改进和复合材料应用前景进行了深入讨论和展望。     

四种无机纳米颗粒对塑料抗紫外性能的研究进展

无机纳米颗粒在塑料抗紫外的研究中一直备受关注,主要介绍了四种(TiO₂、ZnO、SiO₂、CeO₂)典型的无机纳米颗粒在该领域的应用。首先归纳了其既能吸收又能反射或散射紫外线的抗紫外机理;其次,分别论述了不同无机纳米颗粒适用的紫外光波长范围,以在塑料中的添加方法和应用特点为主线,重点介绍了国内外四种无机纳米颗粒在塑料抗紫外性能中的研究现状和进展;最后,将四种无机纳米颗粒在塑料抗紫外性能中的应用特点进行了对比,提出了应用过程中存在的分散和相容性差等问题,以期为无机纳米颗粒的深入应用和发展提供一定的参考。     

基于生物素化纳米抗体检测拟除虫菊酯代谢物3-苯氧基苯甲酸的研究

该研究在前期已制备获得的拟除虫菊酯代谢物3-苯氧基苯甲酸（3-PBA）纳米抗体（Nb）基础上,将其进行生物素化,并利用多聚辣根过氧化物酶标记的链霉亲和素（polyHRP－SA）进行信号扩增,建立了基于生物素－亲和素系统高灵敏间接竞争ELISA检测3-PBA残留的分析方法。对抗原抗体工作浓度、缓冲液条件（pH值、离子浓度、吐温－20浓度）及polyHRP－SA浓度进行优化后,所建方法对3-PBA的半抑制浓度（IC50）为1.7 ng/mL,线性范围为0.37～7.4 ng/mL,检出限（LOD）为0.15 ng/mL。将该方法用于人尿样品（高温酸水解后固相萃取净化）和环境水样品（简单过滤）中3-PBA的检测,加标回收率分别为87.0%～127%和78.0%～113%,相对标准偏差（RSD）不大于10%。该方法具有灵敏度高、操作简便,适用于生物与环境样本中3-PBA的快速筛查。     

基于人血浆荧光光谱与CARS-PLS-LDA的结直肠癌早期检测

该文利用竞争性自适应加权算法（CARS）筛选重要的人血浆荧光光谱变量,并结合偏最小二乘法判别分析（PLS－LDA）建立了结直肠癌患者与非癌患者的分类模型,同时与全波长模型和基于平行因子分析（PARAFAC）建立的模型进行比较。从模型评价指标看,CARS－PLS－LDA的性能显著优于全波长模型和基于PARAFAC的模型。高波未稀释组和低波稀释组的荧光光谱结合CARS－PLS－LDA分类模型的AUC（Area under curve）值均高于0.9,可有效地识别结直肠癌患者。结果表明,CARS变量筛选能够明显改善结直肠癌分类模型的性能,有助于后续癌症临床诊断工具的开发与研究。     

Conductive 2D Metal-organic Framework (Co,NiCo, Ni) Nanosheets for Enhanced Non-enzymatic Detection of Urea

2D metal-organic framework (MOF) has potential applications in electrocatalysis owing to fast mass transfer, charge transfer and large specific surface area. Here, we had prepared three conductive 2D MOF based on Ni, NiCo and Co in a simple and rapid way. The 2D nanostructure of MOF was confirmed by SEM and TEM. The chemical composition was studied by XRD, Raman and XPS spectrum. The electrochemical oxidation and detection was investigated through cyclic voltammetry and current-time method. Their sensing performance for urea was determined by varying oxidation potentials and metal sites. The non-enzymatic Ni-, NiCo- and Co-MOF sensors had good catalytic activity for urea. Compared with NiCo- and Co-MOF, Ni-MOF had a wider linear range (0.5–832.5 μM), high sensitivity (1960 μA mM⁻¹ cm⁻²), low detection limit (0.471 μM), and fast response time. The sensors had well repeatability, reproducibility, and selectivity to specific interfering species. Furthermore, Ni- and NiCo-MOF modified electrode was also applied to detection of milk samples. The results showed that the recovery was satisfactory, which further confirmed the effectiveness of non-enzyme sensor. In general, the highly-sensitive 2D Ni- and NiCo-MOF modified electrode has great potential as nonenzymatic urea sensors for real samples detection in hydrogen energy, clinical diagnostics, and environmental protection, et al.     

Synthesis of structurally diversified BINOLs and NOBINs via palladium-catalyzed C–H arylation with diazoquinones

Privileged biaryl frameworks, BINOL and NOBIN, were efficiently constructed with sole 1-DNQs as arylation reagents under one set of reaction conditions. The judicious selection of palladium-catalytic system plays a pivotal role in the excellent selectivities. This transformation accommodated fairly broad substrate generality for both 2-naphthol and N-Boc-2-naphthylamine and afforded the structurally diversified BINOLs and NOBIN derivatives in high efficiency. Notably, the bromosubstituents which cannot survive in conventional palladium-catalyzed reactions were well-compatible with this set of conditions, providing an effective handle for further enriching the library of BINOLs and NOBINs. Preliminary attempts on the asymmetric variant of this reaction were also performed with up to 80:20 er for BINOLs synthesis.     

Growth and optical properties of Pr<Superscript>3+</Superscript>:KLu(WO<Subscript>4</Subscript>)<Subscript>2</Subscript> laser crystal: a candidate for red emission laser

A Pr³⁺:KLu(WO₄)₂ crystal with dimension of 30 × 30 × 15 mm³ was grown in the K₂W₂O₇ flux. A slice was cut from the crystal, and the polarized absorption and fluorescence spectra were measured at room temperature. Based on the J-O theory, the oscillator intensity parameters Ω _t (t = 2, 4, 6), spontaneous emission probabilities and branch ratios were estimated and good results had been obtained. Furthermore, the crystal has a relatively large emission cross-section in the region of 615–630 nm with the highest value of 14.5 × 10^?20 cm², which indicates that the crystal is good for the application in red emission laser. The emission decay time for ¹D₂ and ³P₀ multiplets was discussed. By adapting the I-H model to fit the emission decay curves, the lifetime for ¹D₂ at 607 nm and ³P₀ at 615 nm are 19.72 μs and 8.95 μs, respectively. Then the corresponding fluorescence quantum efficiencies of the two multiplets reach 83.7 % and 87.9 %, respectively. All the studies illustrate that this crystal is potential in red emission laser application.     

球形Dirac方程的空间格点求解及假态问题

本文在空间格点上利用虚时间步长方法求解了球形Dirac方程, 着重研究了出现的假态问题. 利用三点数值导数公式离散方程中一阶导数项, 可以证明对于量子数为 κ 和 -κ的单粒子能级能量是完全相同的, 其中一个为物理解, 另一个为假态. 通过在径向Dirac方程中引入Wilson 项, 可以解决假态问题, 得到全部物理解. 文章以 Woods-Saxon 势为例, 考虑 Wilson 项后, 得到与打靶法一致的结果.     

Electrical control of antiferromagnetic metal up to 15 nm

Manipulation of antiferromagnetic (AFM) spins by electrical means is on great demand to develop the AFM spintronics with low power consumption. Here we report a reversible electrical control of antiferromagnetic moments of FeMn up to 15 nm, using an ionic liquid to exert a substantial electric-field effect. The manipulation is demonstrated by the modulation of exchange spring in [Co/Pt]/FeMn system, where AFM moments in FeMn pin the magnetization rotation of Co/Pt. By carrier injection or extraction, the magnetic anisotropy of the top layer in FeMn is modulated to influence the whole exchange spring and then passes its influence to the [Co/Pt]/FeMn interface, through a distance up to the length of exchange spring that fully screens electric field. Comparing FeMn to IrMn, despite the opposite dependence of exchange bias on gate voltages, the same correlation between carrier density and exchange spring stiffness is demonstrated. Besides the fundamental significance of modulating the spin structures in metallic AFM via all-electrical fashion, the present finding would advance the development of low-power-consumption AFM spintronics.     

基于偏振特性对石英玻璃和绿漆涂层的反演

物质的偏振特性与其复折射率、表面粗糙度以及观测几何条件有关,为了应用偏振探测技术实现对目标的定量反演,本文首先对两种典型目标(绿漆涂层和石英玻璃)的偏振特性进行了实验测定,并对偏振度与探测天顶角的关系进行了分析。利用实验数据并基于描述目标偏振特性的PG模型首次在考虑了粗糙度的影响下,对目标的折射率、消光系数进行了定量反演,最后将反演结果与参考结果进行比较。结果表明,石英玻璃的折射率相对误差为4.944 9%,绿漆涂层的折射率与消光系数的相对误差分别为11%和21.558 9%。该方法在考虑表面粗糙度的条件下能够更精确地测定物质的复折射率,同时也为偏振技术应用于目标定量反演提供了依据。