Parallel solution combustion synthesis for combinatorial materials studies

A parallel solution combustion synthesis technique was developed for combinatorial materials studies. The vigorous combustion reactions were successfully limited in the microreactors by using a substrate-net-mask microreactor system and the lowest adoptable furnace temperature. Using this technique, a luminescent materials library of Y3Al5O12/Tb(chi) was synthesized with the aid of an ink-jet delivery system. Structure and luminescence characterizations were implemented using X-ray diffraction and UV/X-ray spectroscopies, respectively. The results show that this technique is reliable and applicable to combinatorial study of powder materials with high synthesis temperature.     

Aluminum Lon Removal from Monoaluminum Ovotransferrin by Pyrophosphate

The rates at which aluminum was removed from the N- and C-terminal monoaluminum ovotransferrins by pyrophosphate were evaluated by UV difference spectra in 0.01 mol/L Hepes, pH=7.4 and at 37℃. Pesudo first-order rate constants as a function of pyrophosphate concentration were measured. The results indicate that the pathways of aluminum removal are different. For the N-terminal binding site, aluminum removal follows simple saturation kinetics, while the removal of aluminum from the C-terminal binding site reverts to the combination of saturation and first-order kinetics. The saturation component is consistent with a rate-limiting conformational change in the protein as has been reported. We propose that the first-order kinetics mechanism is attributed to a pre-equilibrium process. The rate constants of saturation kinetics are accelerated from both terminals with the addition of 0.1 mol/L chloride to the monoaluminum ovotransferrin solutions, whereas the rates of the first-order kinetics are decreased for the C-terminal binding site. The effect of chloride ionic strength causes a continuing increase on kobs for the N- and C-terminal binding sites. Moreover, the kinetics behavior of the N-terminal is more easily affected by chloride than that of the C-terminal. In the experiment presumably the N-terminal site is apparently kinetically more labile than the C-terminal site.     

Sensitive Determination of DNA by Resonance Light Scattering with Pentamethoxyl Red

A novel sensitive method for the determination of nucleic acid (DNA) using the resonance light scattering (RLS) spectra of pentamethoxyl red has been developed. It is based on the effects on the resonance light scattering of Pentamethoxyl Red. The effective factors and the optimum conditions were studied, and the enhanced intensity of RLS is in proportion to the concentration of nucleic acids in the range of 0–2.54 µg mL⁻¹ for ct-DNA, 0–4.54 µg mL⁻¹ for hs-DNA. The limits of detection are 1.1 and 2.1 ng mL⁻¹, respectively. Most foreign substances do not interfere in the determination, and the method has good selectivity and high sensitivity. It has been applied to the determination of DNA in synthetic samples and in real samples with satisfactory results.     

DFT study and Monte Carlo simulation on proton transfers of 2-amino-2-oxazoline, 2-amino-2-thiazoline, and 2-amino-2-imidazoline in the gas phase and in water

Density functional theory (DFT) and Monte Carlo (MC) simulation with free energy perturbation (FEP) techniques have been used to study the tautomeric proton transfer reaction of 2-amino-2-oxazoline, 2-amino-2-thiazoline, and 2-amino-2-imidazoline in the gas phase and in water. Two reaction pathways were considered: the direct and water-assisted transfers. The optimized structures and thermodynamic properties of stationary points for the title reaction system in the gas phase were calculated at the B3LYP/6-311+G(d, p) level of theory. The potential energy profiles along the minimum energy path in the gas phase and in water were obtained. The study of the solvent effect of water on the proton transfer of 2-amino-2-oxozoline, 2-amino-2-thiazoline, and 2-amino-2-imidazoline indicates that water as a solvent is favorable for the water-assisted process and slows down the rate of the direct transfer pathway.     

电极条件对硫酸介质中电解还原提纯镱过程的影响

研究了以钌铱钛合金网和汞分别为阳、阴电极, 在无气氛保护条件下, 采用电解还原方法从铥、镱、镥硫酸盐溶液中分离提纯镱的过程. 讨论了在8 V恒电压时的电极间距、位置, 以及阴、阳极表面积对电解过程中的电流、还原率影响. 优化了电解还原过程, YbSO4产品的纯度稳定达到99.5%以上, 一次收率可达80%;提镱后母液中的铥和镥被富集4倍以上, 其中Lu含量高于50%, 十分有利于后续铥/镥分离.     

Permeation of particle through a four-helix-bundle model channel

By using molecular dynamics simulation, the dynamic behaviors of particle permeation through a four-helix-bundle model channel are studied. The interior cavity of the four-helix-bundle provides the "routes" for particle permeation. The main structural properties of the model channel are similar to those that appear in natural four-helix-bundle proteins. It is found that the interior structure of the model channel may greatly influence the permeation process. At the narrow necks of the model channel, the particle would be trapped during the permeation. There is a threshold value for the driving force. When the driving force is larger than this threshold value, the mean first permeation time decreases sharply and tends to be saturated. Increasing the temperature of either the model channel or the particle reservoir can also facilitate the permeation. Enhancing the interaction strength between the particle and monomer on the four-helix-bundle model chain will hinder the permeation. Hence, the electrical current which is induced by the particle permeation is a function of the driving force and temperature. It is found that this current increases monotonically as the strength of the driving force or the temperature increases, but decreases as the interaction strength between the particle and monomer increases. It is also found that the larger the friction coefficient, the slower the permeation is. In addition, the multiparticle (or multi-ion) permeation process is also studied. The permeation of multiparticle is usually quicker than that of the single particle. The permeation of particle through a five-helix-bundle shows similar properties as that through a four-helix-bundle.     

Synergetic degradation of chitosan with gamma radiation and hydrogen peroxide

Chitosan samples were irradiated by ⁶⁰Co γ-rays in the presence of hydrogen peroxide with radiation dose from 10 kGy to 100 kGy. The degradation was monitored by gel permeation chromatography (GPC), revealing the existence of a synergetic effect on the degradation. Structures of the degraded products were characterized with Fourier-transform infrared spectra (FT-IR), ultraviolet-visible spectral (UV-vis) analysis, and X-ray diffraction (XRD). Results showed that the crystallinity of chitosan decreases with degradation, and the crystalline state of water-soluble chitosan is entirely different from that of water-insoluble chitosan. An elemental analysis method was employed to investigate changes in the element content of chitosan after degradation. Mechanism of chitosan radiation degradation with and without hydrogen peroxide was also discussed.     

Mechanical properties of BPDA-ODA polyimide fibers

An aromatic polyimide was synthesized via a one-step polycondensation reaction between biphenyltetracarboxylic dianhydride (BPDA) and 4,4′-oxydianiline (ODA) in p-chlorophenol. The polyimide (BPDA-ODA) solution dopes were spun into fibers by means of dry-jet wet spinning. The as-spun fibers were drawn and treated in heating tubes for improving the mechanical properties. The thermal treatment on the fibers resulted in a relatively high tensile strength and modulus. Thermal mechanical analysis (TMA) was employed to study the linear coefficient of thermal expansion (CTE). Thermal gravimetry analysis (TGA) spectra showed that the BPDA-ODA fibers possessed an excellent property of thermo-oxidative degradation resistance. The sonic modulus E_s of the polyimide fibers was measured.     

Chemical fixation of CO2 with highly efficient ZnCl2/[BMIm]Br catalyst system

The chemical fixation of CO₂ with mono-substituted terminal epoxides or cyclohexene oxide to form cyclic carbonates under the ZnCl₂/[BMIm]Br catalyst system without using additional organic solvents was achieved in excellent selectivity (>98%) and TOF (5410 h⁻¹) and the catalyst could be used six times almost without losing its catalytic activity and selectivity. Besides, the pure cis-cyclic carbonate of cyclohexene oxide was obtained in this catalyst system.     

Solution-phase synthesis and electrochemical hydrogen storage of ultra-long single-crystal selenium submicrotubes

Ultra-long single-crystalline trigonal selenium submicrotubes were synthesized using a facile one-step solution-phase approach with the assistance of nonionic surfactant Polyoxyethylene(20)sorbitan monolaurate (Tween-20), which turned out to be significant for the formation of ultra-long Se submicrotubes. XRD, Raman, SEM, and TEM were adopted to characterize the morphology, structure and phase composition of the as-prepared Se products. It was found that the length of the obtained Se submicrotubes was over 100 microm. By variation of the experimental parameters, the t-Se spheres, nanowires, and broken microtubes can be prepared. The possible growth mechanism of the ultra-long selenium submicrotubes was explained. In addition, we have also demonstrated that the synthesized ultra-long t-Se submicrotubes using the Tween-20-assisted approach can electrochemically charge and discharge with the high capacity of 265 mAh/g (corresponding to 0.97 wt % hydrogen in SWNTs) under normal atmosphere at room temperature. Cyclic voltammetry was adopted to investigate the adsorption-oxidation behavior of ultra-long selenium submicrotubes. It was observed that the morphology of the synthesized selenium products had a remarkable influence on their capacity of electrochemical hydrogen storage. These differences in hydrogen storage capacity are likely due to the size and density of tubes as well as the microcosmic morphology of different Se samples. The as-obtained ultra-long Se submicrotubes are expected to find wide applications in hydrogen storage, high-energy batteries, and optoelectronic, biologic, and catalytic fields as well as in the studies of structure-property relationships. This simple Tween-assisted approach might be extended to the preparations of one-dimensional nanostructures of tellurium and other anisotropic materials.