Lifetime measurements and transition probability calculations in singly ionized tungsten (W<Subscript>II</Subscript>)

New measurements of radiative lifetimes for 9 levels in singly ionized tungsten (W_II) have been performed with the time-resolved laser-induced-fluorescence technique. Transition probabilities have been obtained from a combination of experimental lifetimes and theoretical branching fractions. The reliability of the present results is assessed through the good agreement observed between the calculated lifetimes and the experimental values from this work and from previous publications. These new results fill in a gap in the available data for this atomic species particularly important for fusion reactors.     

上海光源150MeV电子直线加速器的设计与调试

上海光源150MeV直线加速器由热阴极电子枪,次谐波聚束器和聚束器,四根S波段等梯度行波加速管及必要的磁铁等组成.外围还有由从微波到直流的电源和功率源,性能监测和联锁控制的硬件和软件等.概述了150MeV直线加速器的设计,安装,调试和达到的结果.     

BTA在铜表面吸附的密度泛函理论研究

本文基于密度泛函理论(DFT)的第一性原理研究了苯并三氮唑(BTA)分子吸附于铜表面的反应活性特征及其吸附在三种不同取向晶面时的电荷转移以及成键情况,结果表明：BTA分子的亲电和亲核活性中心为N(1)、N(2)和C(5),在铜表面垂直吸附时为化学吸附,Cu原子的最外层价电子转移到N(2)原子上,两者形成配位键;BTA分子在三种不同取向的铜表面吸附时的吸附能大小为：Cu(110)_x>Cu(100)_x>Cu(111)_x(x=T、B、H),T表示顶位,B表示桥位,H表示空位;BTA吸附在Cu(111)面的转移电荷量：T(顶位)>B(桥位)>H(空位).     

Ni/Pb(Zr,Ti)O3/TbFe2层状复合材料的谐振磁电特性研究

采用化学镀和黏接法制备层状磁电复合材料Ni/PZT/TbFe₂,研究其磁电性能及谐振频率随Ni层厚度的变化情况. 结果表明:Ni/PZT/TbFe₂层状磁电复合材料与其他结构的磁电性能不同,其一阶弯曲谐振峰值和纵向谐振峰值都很大. 随着Ni层厚度的增加,Ni/PZT/TbFe₂层状磁电复合材料的一阶纵向谐振峰值逐渐增大. 结合实验数据和理论计算值得出了材料的一阶弯曲谐振频率fr1和一阶纵向谐振频率f 关键词： 磁电效应 正磁致伸缩 负磁致伸缩 谐振频率     

La-Ba-Sm体系催化剂上的甲烷氧化偶联

用甲烷氧化偶联反应评价了不同方法制备的Ｌａ－Ｂａ－Ｓｍ体系催化剂，结果表明，用机械混合Ｌａ２Ｏ３，Ｂａ（ＯＨ）２．８Ｈ２Ｏ和Ｓｍ２Ｏ３三组分及高温焙烧方法制备的催化剂，从Ｃ２收率和选择性总体看，较其它方式优越，在催化剂（ＩＶ）上进行了５００ｈ的稳定性实验，在整个过程中，催化剂的活性和选择性基本稳定；催化剂的起动温度较低，在较宽的温度范围内易于控制对工业生产意义较大，通过ＸＲＤ，ＸＰＳ，ＩＲ，ＳＥＭ     

ZnO/p-Si异质结的深能级及其对发光的影响

利用深能级瞬态谱(DLTS)和光致发光谱(PL),研究了ZnO/pSi异质结的两种不同温度(850℃,1000℃)退火下的深能级中心。发现850℃退火的样品存在3个明显的深中心,分别为E₁=E_v+0.21eV,E₂=E_v+0.44eV,E₃=E_v+071eV;而1000℃退火样品仅存在一个E₁=E_v+021eV的中心,且其隙态密度要比850℃退火的大。同时,测量了两个样品的PL谱。发现1000℃退火可消除一些影响发光强度的深能级,对改善晶格结构,提高样品的发光强度有利。     

The Biological Fate of Pharmaceutical Excipient β-Cyclodextrin: Pharmacokinetics,Tissue Distribution,Excretion, and Metabolism of β-Cyclodextrin in Rats

β-cyclodextrin has a unique annular hollow ultrastructure that allows encapsulation of various poorly water-soluble drugs in the resulting cavity, thereby increasing drug stability. As a bioactive molecule, the metabolism of β-cyclodextrin is mainly completed by the flora in the colon, which can interact with API. In this study, understanding the in vivo fate of β-cyclodextrin, a LC-MS/MS method was developed to facilitate simultaneous quantitative analysis of pharmaceutical excipient β-cyclodextrin and API dextromethorphan hydrobromide. The established method had been effectively used to study the pharmacokinetics, tissue distribution, excretion, and metabolism of β-cyclodextrin after oral administration in rats. Results showed that β-cyclodextrin was almost wholly removed from rat plasma within 36 h, and high concentrations of β-cyclodextrin distributed hastily to organs with increased blood flow velocities such as the spleen, liver, and kidney after administration. The excretion of intact β-cyclodextrin to urine and feces was lower than the administration dose. It can be speculated that β-cyclodextrin metabolized to maltodextrin, which was further metabolized, absorbed, and eventually discharged in the form of CO₂ and H₂O. Results proved that β-cyclodextrin, with relative low accumulation in the body, had good safety. The results will assist further study of the design and safety evaluation of adjuvant β-cyclodextrin and promote its clinical development.     

Investigating bottom-quark Yukawa interaction at Higgs factory

Measuring the fermion Yukawa coupling constants is important for understanding the origin of the fermion masses and their relationship with spontaneously electroweak symmetry breaking.In contrast,some new physics(NP)models change the Lorentz structure of the Yukawa interactions between standard model(SM)fermions and the SM-like Higgs boson,even in their decoupling limit.Thus,the precise measurement of the fermion Yukawa interactions is a powerful tool of NP searching in the decoupling limit.In this work,we show the possibility of investigating the Lorentz structure of the bottom-quark Yukawa interaction with the 125 GeV SM-like Higgs boson for future e^+e^- colliders.     

Identification of Pharmacophoric Fragments of DYRK1A Inhibitors Using Machine Learning Classification Models

Dual-specific tyrosine phosphorylation regulated kinase 1 (DYRK1A) has been regarded as a potential therapeutic target of neurodegenerative diseases, and considerable progress has been made in the discovery of DYRK1A inhibitors. Identification of pharmacophoric fragments provides valuable information for structure- and fragment-based design of potent and selective DYRK1A inhibitors. In this study, seven machine learning methods along with five molecular fingerprints were employed to develop qualitative classification models of DYRK1A inhibitors, which were evaluated by cross-validation, test set, and external validation set with four performance indicators of predictive classification accuracy (CA), the area under receiver operating characteristic (AUC), Matthews correlation coefficient (MCC), and balanced accuracy (BA). The PubChem fingerprint-support vector machine model (CA = 0.909, AUC = 0.933, MCC = 0.717, BA = 0.855) and PubChem fingerprint along with the artificial neural model (CA = 0.862, AUC = 0.911, MCC = 0.705, BA = 0.870) were considered as the optimal modes for training set and test set, respectively. A hybrid data balancing method SMOTETL, a combination of synthetic minority over-sampling technique (SMOTE) and Tomek link (TL) algorithms, was applied to explore the impact of balanced learning on the performance of models. Based on the frequency analysis and information gain, pharmacophoric fragments related to DYRK1A inhibition were also identified. All the results will provide theoretical supports and clues for the screening and design of novel DYRK1A inhibitors.     

An improved multimodal method for sound propagation in nonuniform lined ducts

An efficient method is proposed for modeling time harmonic acoustic propagation in a nonuniform lined duct without flow. The lining impedance is axially segmented uniform, but varies circumferentially. The sound pressure is expanded in term of rigid duct modes and an additional function that carries the information about the impedance boundary. The rigid duct modes and the additional function are known a priori so that calculations of the true liner modes, which are difficult, are avoided. By matching the pressure and axial velocity at the interface between different uniform segments, scattering matrices are obtained for each individual segment; these are then combined to construct a global scattering matrix for multiple segments. The present method is an improvement of the multimodal propagation method, developed in a previous paper [Bi et al., J. Sound Vib. 289, 1091-1111 (2006)]. The radial rate of convergence is improved from O(n(-2)), where n is the radial mode indices, to O(n(-4)). It is numerically shown that using the present method, acoustic propagation in the nonuniform lined intake of an aeroengine can be calculated by a personal computer for dimensionless frequency K up to 80, approaching the third blade passing frequency of turbofan noise.