Co‐ and Counterion Effect on the Micellization Characteristics of Dodecylpyridinium Chloride

Micellization parameters, critical micelle concentration (cmc), degree of counterion dissociation (α), aggregation number (n), critical packing parameter, and hydrophobic core volume of Dodecylpyridinium chloride (DPC) micelles were determined in presence of varying concentrations of sodium chloride (NaCl), sodium acetate (SAc), sodium propionate (SPr), ethylammonium chloride (EACl), diethylammonium chloride (DEACl), tetraethylammonium chloride (TEACl), and propylammonium chloride (PACl) through conductometric investigations at 298.15 K. The resulting data suggests that both counter and coions affect the cmc values‐cmc depressing tendency of the salts varies in order PACl≈NaCl>EACl>DEACl>TEACl>SPr>SAc, while the degree of counterion dissociation is dependent on the nature and concentration range of the added salt. Increasing salt concentration increases the relative hydrophobic volume of the micelles and coion has not much effect on aggregation number.     

Salt‐Induced Depression of Lower Critical Solution Temperature in a Surface‐Grafted Neutral Thermoresponsive Polymer

Summary: Quartz crystal microbalance with dissipation monitoring (QCM‐D) is employed to determine the effect of salt on the volume phase transition of thermoresponsive polymer brushes. Changes in mass and viscoelasticity of poly(N‐isopropylacrylamide) (PNIPAM) layers grafted from a QCM‐D crystal are measured as a function of temperature, upon contact with aqueous solutions of varying salt concentrations. The phase‐transition temperature of PNIPAM brushes, T_C,graft, quantified from the QCM‐D measurements is found to decrease as the concentration of salt is increased. This phenomenon is explained by the tendency of salt ions to affect the structure of water molecules (Hofmeister effect). However, in contrast to the linear decrease in phase‐transition temperature upon increasing salt concentration observed for free PNIPAM, the trend in T_C,graft for PNIPAM brushes is distinctively non‐linear.

Schematic representation of the effect of salt concentration on the phase transition behavior of thermoresponsive polymer brushes.     

Dimers of boroglycine and methylamine boronic acid: a computational comparison of the relative importance of dative versus hydrogen bonding

Boronic acids are widely used in materials science, pharmacology, and the synthesis of biologically active compounds. In this Article, geometrical structures and relative energies of dimers of boroglycine, H2N-CH2-B(OH)2, and its constitutional isomer H3C-NH-B(OH)2, were computed using second-order M?ller-Plesset perturbation theory and density functional theory; Dunning-Woon correlation-consistent cc-pVDZ, aug-cc-pVDZ, cc-pVTZ, and aug-cc-pVTZ basis sets were employed for the MP2 calculations, and the Pople 6-311++G(d,p) basis set was employed for a majority of the DFT calculations. Effects of an aqueous environment were incorporated into the results using PCM and COSMO-RS methodology. The lowest-energy conformer of the H2N-CH2-B(OH)2 dimer was a six-membered ring structure (chair conformation; Ci symmetry) with two intermolecular B:N dative-bonds; it was 14.0 kcal/mol lower in energy at the MP2/aug-cc-pVDZ computational level than a conformer with the classic eight-centered ring structure (Ci symmetry) in which the boroglycine monomers are linked by a pair of H-O...H bonds. Compared to the results of MP2 calculations with correlation-consistent basis sets, DFT calculations using the PBE1PBE and TPSS functionals with the 6-311++G(d,p) basis set were significantly better at predicting relative conformational energies of the H2N-CH2-B(OH)2 and H3C-NH-B(OH)2 dimers than corresponding calculations using the BLYP, B3LYP, OLYP, and O3LYP functionals, particularly with respect to dative-bonded structures.     

Biosynthesis and characterization of Dillenia indica-mediated silver nanoparticles and their biological activity

Dillenia indica L. is a traditional medicinal plant well known for its ability to cure various human diseases. In the current study, silver nanoparticles have been synthesized by simple and eco-friendly method using Dillenia indica extract. The green synthesized nanoparticles were characterized by Fourier transform infrared (FTIR), UV–visible spectroscopy, Atomic force microscopy (AFM), High-resolution transmission electron microscopy (HR-TEM), Zeta Potential and Size Distribution. UV–visible and FTIR spectra, AFM, HR-TEM and Zeta Potential readings and size distribution conformed that the synthesized silver particles were in the size of nano. The green synthesized silver nanoparticles were subjected for antibacterial activity against Gram-positive bacteria Enterococcus faecalis and Gram-negative bacteria Escherichia coli by agar well diffusion method. The synthesized AgNPs exhibited significant inhibition of 27 and 16 mm against the test bacteria at 0.25 mg/ml. Further the antibacterial activity was confirmed by live and dead cell assay by fluorescence microscopy and morphological changes of bacteria were studied by Scanning electron microscope (SEM). The study recommends that the synthesized silver nanoparticles using Dillenia indica extract have potential application in inhibition of bacteria owing to their potent antibacterial activity.     

High Na+ Mobility in rGO Wrapped High Aspect Ratio 1D SbSe Nano Structure Renders Better Electrochemical Na+ Battery Performance

We chose to understand the cyclic instability and rate instability issues in the promising class of Na⁺ conversion and alloying anodes with Sb₂Se₃ as a typical example. We employ a synthetic strategy that ensures efficient rGO (reduced graphene oxide) wrapping over Sb₂Se₃ material. By utilization of the minimum weight of additive (5 wt.% of rGO), we achieved a commendable performance with a reversible capacity of 550 mAh g⁻¹ at a specific current of 100 mA g⁻¹ and an impressive rate performance with 100 % capacity retention after high current cycling involving a 2 Ag⁻¹ intermediate current step. The electrochemical galvanostatic intermittent titration technique (GITT) has been employed for the first time to draw a rationale between the enhanced performance and the increased mobility in the rGO wrapped composite (Sb₂Se₃-rGO) compared to bare Sb₂Se₃. GITT analysis reveals higher Na⁺ diffusion coefficients (approx. 30 fold higher) in the case of Sb₂Se₃-rGO as compared to bare Sb₂Se₃ throughout the operating voltage window. For Sb₂Se₃-rGO the diffusion coefficients in the range of 8.0×10⁻¹⁵ cm² s⁻¹ to 2.2×10⁻¹² cm² s⁻¹ were observed, while in case of bare Sb₂Se₃ the diffusion coefficients in the range of 1.6×10⁻¹⁵ cm² s⁻¹ to 9.4×10⁻¹⁵ cm² s⁻¹ were observed.     

Novel Schiff bases–based thiophenes: Design,synthesis and biological evaluation

2-amino-5-(3-fluoro-4-methoxyphenyl)thiophene-3-carbonitrile derivatives have been synthesized from 1-(3-fluoro-4-methoxyphenyl)ethanone, malononitrile, mild base, and sulfur powder using the Gewald method through a multistep reaction sequence. The structures of newly synthesized compounds were established on the basis of their elemental analyses, IR, ¹H NMR, ¹³C NMR, and mass spectral data, and then synthesized compounds were screened for their in vitro antimicrobial activity. Among them, derivatives 3b (thiphene), 3f (pyrazole), and 3d (halogen) showed good activity and remaining derivatives exhibited moderate activity.     

Palladium complex in a room temperature ionic liquid: a convenient recyclable reagent for catalytic oxidation

Palladium (Pd)-catalyzed carbonylation of alcohols proceeds in ionic liquid (IL) media (1-ethyl-3-methylimidazolium hexafluorophosphate). Carbonylation of primary/secondary alcohols to aldehydes/ketones was greatly accelerated by the use of a Pd-based catalyst in the presence of NaOCl as an oxidant. The catalyst was more easier to recycle in the IL [Emim]PF₆ with an equal-proportioned CH₂Cl₂ than in the single CH₂Cl₂ or IL.     

Two new coumarins from <Emphasis Type="Italic">Euonymus hamiltonianus</Emphasis>

Two new coumarins, euonidiol (1) and euoniside (2), and a known flavone, luteolin 7-methyl ether, were isolated from the aerial parts of the plant Euonymus hamiltanianus Wall. All the compounds were characterized on the basis of spectral analysis viz. ¹H NMR, ¹³C NMR, DEPT, IR, UV, ESI-MS, and elemental analysis. Published in Khimiya Prirodnykh Soedinenii, No. 1, pp. 10–11, January–February, 2008.     

Development and validation of UHPLC‐MS/MS assay for rapid determination of a carvone Schiff base of isoniazid (CSB‐INH) in rat plasma: application to pharmacokinetic study

In this study, a fast UHPLC‐MS/MS method was developed and validated for the determination of a novel potent carvone Schiff base of isoniazid (CSB‐INH) in rat plasma using carbamazepine as an internal standard (IS). After a single‐step protein precipitation by acetonitrile, CSB‐INH and IS were separated on an Acquity BEH^TM C₁₈ column (50 × 2.1 mm, 1.7 µm) under an isocratic mobile phase, consisting of acetonitrile: 10 mM ammonium acetate (95:5, v/v), at a flow rate of 0.3 mL/min. Quantification was performed on a triple quadrupole tandem mass spectrometer in multiple reactions monitoring mode by using positive electrospray ionization source. The precursor to product ion transitions were set at m/z 270.08 → 79.93 for CSB‐INH and m/z 237.00 → 178.97 for IS. The proposed method was validated in compliance with US Food and Drug Administration and European Medicines Agency guidelines for bioanalytical method validation. The method was found to be linear in the range of 0.35–2500 ng/mL (r² ≥ 0.997) with a lower limit of quantification of 0.35 ng/mL. The intra‐ and inter‐day precision values were ≤12.0% whereas accuracy values ranged from 92.3 to 108.7%. In addition, other validation results were within the acceptance criteria and the method was successfully applied in a pharmacokinetic study of CSB‐INH in rats. Copyright © 2014 John Wiley & Sons, Ltd.     

Structure and properties of plasma-polymerized thin films of polyaniline

Plasma polymerization of aniline and in-situ doping of polvaniline with iodine was carried out using radio frequency glow discharge. Thin films of polyaniline were deposited on platinum and glass. The infrared spectrum shows that the aromatic ring is retained under the plasma conditions. The electrical conductivity measurements indicate that the conductivity increases by more than seven orders of magnitude when the polyaniline is doped by iodine. The scanning electron microscopic studies reveal the formation of irregular pentagons on glass substrate while on platinum, polvaniline forms a fibrillar network. In both the cases a continuous film is obtained.