Covalent attachment of trypsin on plasma polymerized allylamine

This paper focuses on the immobilization of a proteolytic enzyme, trypsin, on plasma polymerized allylamine (ppAA) films. The later have been deposited onto silicon substrate by means of radiofrequency glow discharge. The covalent attachment of the enzyme was achieved in three steps: (i) activation of the polymer surface with glutaraldehyde (GA) as a linker, (ii) immobilization of trypsin and (iii) imino groups reduction treatment. The effects and efficiency of each step were investigated by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Fluorescent spectroscopy was used to evaluate the change of the biological activity following the immobilization steps. The results showed that enzyme immobilization on GA-modified substrate increases the enzyme activity by 50% comparing to adsorbed enzymes, while the imino reduction treatment improves the enzyme retention by about 30% comparing to untreated samples. In agreement with XPS and AFM data, UV–vis absorption spectroscopy, used to quantify the amount of immobilized enzyme, showed that allylamine plasma polymer presents a high adsorption yield of trypsin. Although the adsorbed enzymes exhibit a lower activity than that measured for enzymes grafted through GA linkers, the highest catalytic activity obtained was for the enzymes that underwent the three steps of the immobilization process.     

Correlation between the structure and wettability of photoswitchable hydrophilic azobenzene monolayers on silicon

Photoresponsive monolayers of hydrophilically substituted azobenzenes have been prepared by reaction on aminosilane monolayers on silicon surfaces. Grafting densities in the 0.2-1.0 molecule/nm(2) range were determined by X-ray reflectometry. The monolayers exhibit reversible photoisomerization, switching from a more hydrophilic trans state to a less hydrophilic cis state upon UV irradiation, in contrast with the usual behavior of most azobenzene monolayers that switch from a less to a more hydrophilic state. This indicates that the wettability is not dominated by the change in the dipole moment of the azobenzene moiety but originates from variations in the composition of the outer surface of the monolayers resulting from the reorientation of the substituent groups. The light-driven change in the water contact angle correlates linearly with the grafting density but remains small. However, the wettability contrast can be increased by forcing the molecules to stand in an improved vertical orientation, either by densifying the underlying aminosilane monolayer or by filling the voids left at the bottom of the layer of grafted azobenzene molecules.     

Modeling of submicrometer aerosol penetration through sintered granular membrane filters

We present a deep-bed aerosol filtration model that can be used to estimate the efficiency of sintered granular membrane filters in the region of the most penetrating particle size. In this region the capture of submicrometer aerosols, much smaller than the filter pore size, takes place mainly via Brownian diffusion and direct interception acting in synergy. By modeling the disordered sintered grain packing of such filters as a simple cubic lattice, and mapping the corresponding 3D connected pore volume onto a discrete cylindrical pore network, the efficiency of a granular filter can be estimated, using new analytical results for the efficiency of cylindrical pores. This model for aerosol penetration in sintered granular filters includes flow slip and the kinetics of particle capture by the pore surface. With a unique choice for two parameters, namely the structural tortuosity and effective kinetic coefficient of particle adsorption, this semiempirical model can account for the experimental efficiency of a new class of "high-efficiency particulate air" ceramic membrane filters as a function of particle size over a wide range of filter thickness and texture (pore size and porosity) and operating conditions (face velocity).     

Amino-aryl-carbenes: alternative ligands for transition metals?

Despite the presence of a single amino substituent, an amino-anthryl-carbene was found to behave as a strong sigma-donor weak pi-acceptor ligand toward rhodium(I) fragments.     

Memory of chirality in cascade rearrangements of enediynes

The cascade rearrangement of chiral enediynes 1c-e, involving successively 1,3-proton shift, Saito-Myers cyclization, 1,5-hydrogen atom transfer, and intramolecular coupling of the resulting biradical, proceeded at 80 °C to form tri- and tetracyclic heterocycles possessing a quaternary stereogenic center with a very high level of memory of chirality.     

A fused donor-acceptor system based on an extended tetrathiafulvalene and a ruthenium complex of dipyridoquinoxaline

An application of the Horner-Wadsworth-Emmons reaction carried out on a ruthenium compound as the electrophilic precursor is described for the synthesis of fused donor-acceptor system 1 based on an extended tetrathiafulvalene and a ruthenium complex of dipyridoquinoxaline units.     

General and efficient synthetic approach to novel tricyclic spiroketones

A general and efficient synthetic approach to tricyclic spiroketones of interest as useful scaffolds in drug discovery was developed. Starting from commercially available benzyl 4-oxo-1-piperidinecarboxylate (5), spirocyclic tetralone 4, spirocyclic indanone 14, and spirocyclic benzocycloheptanone 15 were synthesized via six reaction steps in excellent overall yield.     

The Benzyne Aza‐Claisen Reaction

Adding an aryne to a tertiary allylamine affords o‐allylaniline products of an aza‐Claisen rearrangement. The aryne simultaneously provides the π component for the rearrangement and the quaternization event that lowers the activation energy for the sigmatropic shift. The reaction was applied to the synthesis of medium‐ring benzannulated amines (see scheme).

     

Depth profiling of polymer samples using Ga+ and C60+ ion beams

In this contribution, we focus on the use of C₆₀⁺ ions for depth profiling of model synthetic polymers: polystyrene (PS) and poly(methylmethacrylate) (PMMA). These polymers were spin coated on silicon wafers, and the obtained samples were depth‐profiled both with Ga⁺ ions and C₆₀⁺ ions. We observed an important yield enhancement for both polymers when C₆₀⁺ ions are used. More specifically, we discuss here the decrease in damage obtained with C₆₀, which is found to be very sensitive to the nature of the polymer. During the C₆₀⁺ sputtering of the PMMA layer, after an initial decrease, a steady state is observed in the secondary ion yield of characteristic fragments. In contrast, for PS, an exponential decrease is directly observed, leading to an initial disappearance cross section close to the value observed for Ga⁺. Though there is a significant loss of characteristic PS signal when sputtering with C₆₀⁺ ions beams, there are still significant enhancements in sputter yields when employing C₆₀⁺ as compared to Ga⁺. Copyright © 2008 John Wiley & Sons, Ltd.