One step derivatization with British Anti-Lewsite in combination with gas chromatography coupled to triple-quadrupole tandem mass spectrometry for the fast and selective analysis of inorganic arsenic in rice

We developed a new fast and selective analytical method for the determination of inorganic arsenic (iAs) in rice by a gas chromatography – tandem mass spectrometry (GC-MS/MS) in combination with one step derivatization of inorganic arsenic (iAs) with British Anti-Lewsite (BAL). Two step derivatization of iAs with BAL has been previously performed for the GC-MS analysis. In this paper, the quantitative one step derivatization condition was successfully established. The GC-MS/MS was carried out with a short nonpolar capillary column (0.25 mm × 10 m) under the conditions of fast oven temperature ramp rate (4 °C/s) and high linear velocity (108.8 cm/s) of the carrier gas. The established GC-MS/MS method showed an excellent linearity (r² > 0.999) in a tested range (0.2–100.0 μg L⁻¹), ultra-low limit of detection (LOD, 0.08 pg), and high precision and accuracy. The GC-MS/MS technique showed far greater selectivity (22.5 fold higher signal to noise ratio in rice sample) on iAs than GC-MS method. The gas chromatographic running time was only 2.5 min with the iAs retention time of 1.98 min. The established method was successfully applied to quantify the iAs contents in polished rice. The mean iAs content in the Korean polished rice (n = 27) was 66.1 μg kg⁻¹ with the range of 37.5–125.0 μg kg⁻¹. This represents the first report on the GC-tandem mass spectrometry in combination with the one step derivatization with BAL for the iAs speciation in rice. This GC-MS/MS method would be a simple, useful and reliable measure for the iAs analysis in rice in the laboratories in which the expensive and element specific HPLC-ICP-MS is not available.     

Quantification of Carbohydrates and Related Materials Using Sodium Ion Adducts Produced by Matrix-Assisted Laser Desorption Ionization

The utility of sodium ion adducts produced by matrix-assisted laser desorption ionization for the quantification of analytes with multiple oxygen atoms was evaluated. Uses of homogeneous solid samples and temperature control allowed the acquisition of reproducible spectra. The method resulted in a direct proportionality between the ion abundance ratio I([A?+?Na]⁺)/I([M?+?Na]⁺) and the analyte concentration, which could be used as a calibration curve. This was demonstrated for carbohydrates, glycans, and polyether diols with dynamic range exceeding three orders of magnitude.

Open image in new window

Graphical Abstract ?

     

Dual colorimetric sensoring bis(indolyl)calix[4]crown-6

Calix-chromophore, bis(indolyl)calix[4]crown-6 (1) in an oxidized form showing selective colorimetric changes for both alkaline earth cations and F⁻ in CH₃CN, has been newly synthesized. It is observed that the binding ability of 1 for the Ca²⁺ binding enhances in the presence of F⁻. Compound 1 can operate three independent combinational NOR logic gates toward metal cations and anions.     

Response surface methodological approach for optimization of free fatty acid removal in feedstock

Fatty acid methyl esters, also referred to as biodiesel, have been determined to have a great deal of potential as substitutes for petro-diesel. In order to optimize conversion yield in the biodiesel production process, feedstocks were previously recommended to be anhydrous, with a free fatty acid content of less than 0.5%. In this study, we removed free fatty acid from feedstock through the use of solid catalysts and response surface methodology. In order to optimize free fatty acid removal, response surface methodology was applied to delineate the effects of five-level-four-factors and their reciprocal interactions on free fatty acid removal. A total of 30 individual experiments were conducted, each of which was designed to study reaction temperature, reaction time, catalyst amounts, or methanol amounts. A statistical model was used to estimate that the optimal free fatty acid removal yield would be 100%, under the following optimized reaction conditions: a reaction temperature of 66.96 degrees C, a catalyst amount of 12.66% (w/v), and a reaction time of 37.65 min. Using these optimal factor values under experimental conditions in three independent replicates, an average conversion yield was well achieved within the values predicted by the model.     

Plasma surface functionalization of poly[bis(2,2,2-trifluoroethoxy)phosphazene] films and nanofibers

Polyphosphazenes are a class of hybrid organic-inorganic macromolecules with high thermo-oxidative stability and good solubility in many solvents. Fluoroalkoxy phosphazene polymers also have high surface hydrophobicity. A method is described to tune this surface property while maintaining the advantageous bulk materials characteristics. The polyphosphazene single-substituent polymer, poly[bis(2,2,2-trifluoroethoxy)phosphazene], with flat film, fiber mat, or bead mat morphology was surface functionalized using an atmospheric plasma treatment with oxygen, nitrogen, methane, or tetrafluoromethane/hydrogen gases. Surface chemistry changes were detected by static water contact angle (WCA) measurements as well as X-ray photon spectroscopy (XPS). It was found that changes in the WCA of as much as 150 degrees occurred, accompanied by shifts in the ratio of elements on the polymer surface as detected by XPS. Overall this plasma technique provides a convenient method for the generation of specific surface characteristics while maintaining the hydrophobicity of the bulk material.     

Ligand-dependent particle size control of PbSe quantum dots

Colloidal solutions of monodisperse PbSe quantum dots (QDs) were synthesized by a hot solution chemical method from a reaction mixture of lead oleate and TOPSe (TOP: tri-n-octylphosphine). The synthesis was carried out at a fixed temperature (170 degrees C) and time, while the particle sizes of the PbSe QDs were controlled by using two different kinds of organic ligands with varied chain length. It was seen that the tuning of PbSe QDs are possible by using the proper molar ratio of the co-ligands, such as acetic acid or hexanoic acid, at a fixed reaction temperature and time, verified by TEM and XRD as well as NIR absorption analysis. The effects of different organic acids were studied and the role of additional organic acids might be due to the extent of ligand exchange efficiency between the Pb oleate and acetic/hexanoic acid in the initial stage, which is caused by the steric hindrance effects of the acids.     

Subtle Modification of Imine-linked Helical Receptors to Significantly Alter their Binding Affinities and Selectivities for Chiral Guests

Aromatic helical receptors P- 1 and P- 2 were slightly modified by aerobic oxidation to afford new receptors P- 7 and P- 8 with right-handed helical cavities. This subtle modification induced significant changes in the binding properties for chiral guests. Specifically, P- 1 was reported to bind d -tartaric acid (K_a=35500 M⁻¹), used as a template, much strongly than l -tartaric acid (326 M⁻¹). In contrast, its modified receptor P- 7 exhibited significantly reduced affinities for d -tartaric acid (3600 M⁻¹) and l -tartaric acid (125 M⁻¹). More dramatic changes in the affinities and selectivities were observed for P- 2 and P- 8 upon binding of polyol guests. P- 2 was determined to selectively bind d -sorbitol (52000 M⁻¹) over analogous guests, but P- 8 showed no binding selectivity: d -sorbitol (1890 M⁻¹), l -sorbitol (3330 M⁻¹), d -arabitol (959 M⁻¹), l -arabitol (4970 M⁻¹) and xylitol (4960 M⁻¹) in 5% (v/v) DMSO/CH₂Cl₂ at 25±1 °C. These results clearly demonstrate that even subtle post-modifications of synthetic receptors may significantly alter their binding affinities and selectivities, in particular for guests of long and flexible chains.     

Inhibitory Effect of LGS and ODE Isolated from the Twigs of Syringa oblata subsp. dilatata on RANKL-Induced Osteoclastogenesis in Macrophage Cells

Osteoblasts and osteoclasts play a pivotal role in maintaining bone homeostasis, of which excessive bone resorption by osteoclasts can cause osteoporosis and various bone diseases. However, current osteoporosis treatments have many side effects, and research on new treatments that can replace these treatments is ongoing. Therefore, in this study, the roles of ligustroside (LGS) and oleoside dimethylester (ODE), a natural product-derived compound isolated from Syringa oblata subsp. dilatata as a novel, natural product-derived osteoporosis treatments were investigated. In the results of this study, LGS and ODE inhibited the differentiation of receptor activator of nuclear factor kappa-Β ligand (RANKL)-induced RAW264.7 cells into osteoclasts without cytotoxicity, and down-regulated the activity of TRAP, a specific biomarker of osteoclasts. In addition, it inhibited bone resorption and actin ring formation, which are important functions and features of osteoclasts. Also, the effects of LGS and ODE on the mitogen-activated protein kinase (MAPK) and nuclear factor kappa-light-chain-enhancer of activated B (NF-κB) and phosphoinositide 3-kinases (PI3K)/ protein kinase B (Akt)/mechanistic target of rapamycin (mTOR) signaling pathways that play important roles in osteoclast differentiation were evaluated. In the results, LGS and ODE downregulated the phosphorylation of RANKL-induced MAPK and PI3K/Akt/mTOR proteins in a concentration-dependent manner, translocation of NF-κB into the nucleus was inhibited. As a result, the compounds LGS and ODE isolated from S. oblate subsp. dilatata effectively regulated the differentiation of RANKL-induced osteoclasts and inhibited the phosphorylation of signaling pathways that play a pivotal role in osteoclast differentiation. Therefore, these results suggest the possibility of LGS and ODE as new natural product treatments for bone diseases caused by excessive osteoclasts.