Physical properties (thermal,thermomechanical, magnetic,and adhesive) of some smart orthodontic wires

Thermal, thermomechanical, and caloric properties of commercial orthodontic wires (produced by Natural Orthodontics Corp., USA) with cylindrical and rectangular geometry were studied. Depending on the applied forces, there were identified the range of elasticity, the elasticity–viscoelasticity coexistence domain and the domain in which a maximum force of 18 N is applied, for the orthodontic wires. When increasing the thickness of orthodontic wires, deformation decreases. The Controlled Force Module, in the tension mode, was used for the determination of the orthodontic wires elongation at application of the stretching forces from 0 to 13 N, at 35 °C, maintaining each static force value for 3 min. The increase in the cross-sectional area of the orthodontic wires disfavors the process of elongation of the sample, at the same applied static force. Using the Multi-Frequency–Strain–Stress modulus, in the tension mode, DMA cyclic heating–cooling measurements were performed. The measured physical quantities for orthodontic wires were Storage Modulus, Loss Modulus, Tanδ and Stiffness, at heating and cooling. Thus, the characteristic temperatures of the phase transitions (A_s, A_f, M_s, M_f), of all the studied orthodontic wires were identified. Also, the values of the elasticity modulus (Young’s Modulus) of the orthodontic wires were calculated at 35 °C. With the DSC Q200 device, using temperature-modulated differential scanning calorimetry method, a multi-step temperature variation program, was applied to a rectangular wire, in three stages (cooling–heating–cooling). Through the interpretation of heat fluxes (reversible, irreversible and total), the phase transitions in the formation of martensite, austenite, but also of the rombohedral phase (R-phase), were identified. Formations of austenite and martensite were also evidenced by the classical DSC method, but the classical DSC method also enabled the R-phase identification. The adherence of some food dyes on the orthodontic wires, as well as the modification of the surface roughness of the orthodontic wire after the deposition of the food dye, was also studied. By magnetic measurements, it was established that the orthodontic wires had paramagnetic properties at room temperature, and nitinol was a mixture of 49.2% austenite and 50.8% martensite.

     

Ffast Transient Fluorescence Technique to Study Critical Exponents at the Glass Transition

The fast transient fluorescence (FTRF) technique was used to study critical exponents at the glass transition in free-radical crosslinking copolymerization (FCC) for two different monomeric systems, methyl methacrylate (MMA) and styrene (S). Pyrene (P_y ) was used as a fluorescence probe. The fluorescence lifetimes of P_y from its decay traces were measured and used to monitor the gelation process. Changes in the viscosity of the pregel solutions due to glass formation dramatically enhance the fluorescent yield of aromatic molecules. This effect is used to study the glass transition upon gelation of MMA and S monomeric systems as a function of time, at various temperatures and crosslinker concentrations. The results are interpreted in the view of percolation theory. The gel fraction and weight average degree of polymerization exponents β and γ are found to be 0.37 ± 0.02 and 1.66 ± 0.07 in agreement with percolation results.     

Phase transitions and metastable states in TlGaSe2

The results of measurements of the dielectric constant of TlGaSe₂ in temperature range of successive phase transitions are presented. An anomaly in the temperature dependence of the real part of dielectric constant in TlGaSe₂ has been observed at about 242?K in addition to anomalies at 115, 108, and also near 65?K as reported in previous publications. The presence of temperature hysteresis effects in temperature interval between 115 and 242?K allowed making a conclusion about possible existence of an incommensurate phase in the mentioned temperature range. A model of succession of the structural phase transitions in TlGaSe₂ has been suggested.     

A Novel Non-enzymatic Selective and Sensitive Glucose Sensor Based on Nickel-Copper Oxide@3D-rGO/MWCNTs

In this work, a modified 3D-rGO/MWCNT with nickel and copper oxide nanoparticles were synthesized. The structural properties of this nanocomposite were investigated by several techniques. The fabricated sensor at optimum condition potential of +0.60 V (vs. Ag/AgCl) and a rotational rate of 1800 rpm gave a detection limit of 0.04 μmol L⁻¹ with two dynamic ranges of 0.10–300 and 300–900 μmol L⁻¹ glucose with high stability. The good accuracy of the fabricated sensor was proved in the determination of glucose in a blood sample (with recoveries between 95 % to 105 % and RSDs of 1.2 to 2.5 %).     

Solvent replacement to thermo‐responsive nanoparticles from long‐subchain hyperbranched PSt grafted with PNIPAM for encapsulation

Long‐subchain hyperbranched polystyrene (lsc‐hp PSt) with uniform subchain length was obtained through copper‐catalyzed azide‐alkyne cycloaddition click chemistry from seesaw macromonomer of PSt having one alkynyl group anchored at the chain centre and two azido group attached to both chain ends [alkynyl‐(PSt‐N₃)₂]. After precipitation fraction, different portions of lsc‐hp PSt having narrow overall molecular weight distribution were obtained for further grafting with alkynyl‐capped poly(N‐isopropylacrylamide) (alkynyl‐PNIPAM), which was obtained via single‐electron transfer living radical polymerization of NIPAM with propargyl 2‐bromoisobutyrate as the initiator and grafted onto the peripheral azido groups of lsc‐hp PSt via click chemistry. Thus, amphiphilic lsc‐hp PSt grafted with PNIPAM chains (lsc‐hp PSt‐g‐PNIPAM) was obtained and would have star‐like conformation in tetrahydrofuran (THF). By replacing THF with water, lsc‐hp PSt‐g‐PNIPAM was dissolved at molecular level in aqueous solution due to the hydrophilicity of PNIPAM and exhibited thermal induced shrinkage of PNIPAM arms. The water‐insoluble lsc‐hp PSt would collapse densely and could be served as a reservoir to absorb hydrophobic chemicals in aqueous solution. The influence of overall molecular weight of lsc‐hp PSt on the absorption of pyrene was studied. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

A Class of Non-associated Materials: n-Monotone Materials—Hooke’s Law of Elasticity Revisited

Generalized Standard Materials are governed by maximal cyclically monotone operators and modeled by convex potentials. Géry de Saxcé’s Implicit Standard Materials are modeled by biconvex bipotentials. We analyze the intermediate class of n-monotone materials governed by maximal n-monotone operators and modeled by Fitzpatrick’s functions. Revisiting the model of elastic materials initiated by Robert Hooke, and insisting on the linearity, coaxiality and monotonicity properties of the constitutive law, we illustrate that Fitzpatrick’s representation of n-monotone operators coming from convex analysis provides a constructive method to discover the best bipotential modeling a n-monotone material. Giving up the symmetry of the linear constitutive laws, we find out that n-monotonicity is a relevant criterion for the materials characterization and classification.     

Cascade synthesis of fused polycyclic dihydropyridines by Ni–Zn–Fe hydrotalcite (HT) immobilized on silica-coated magnetite as magnetically reusable nanocatalyst

Research on Chemical Intermediates - An efficient ecofriendly approach has been developed for one-pot multicomponent synthesis of fused polycyclic dihydropyridine (DHP) derivatives. Tandem...