Maleic acid-styrene encapsulated silica cation exchanger in high performance liquid chromatography

The use of poly(maleic acid–styrene)-encapsulated silica for the determination of monovalent and divalent cations is well accepted in ion chromatography. The separation of Mn²⁺, alkali and alkaline earth metal cations is obtained under the same chromatographic conditions. The influences of pH and the concentration of eluent on the retention of cations have been studied. The preparation conditions of packings were studied. The metal ions in the boiler water samples from a thermal power plant were quantitatively determined using this column. The results are in agreement with those determined by ICP and Volumetric analysis methods.     

Tetrapyrrole derivatives substituted with ferrocenylethynyl moieties. synthesis and electrochemical studies

Up to eight redox-active ferrocenyl units have been incorporated, through the unsaturated ethynyl linkers, on the periphery of a series of cyclic tetrapyrrole derivatives including zinc(II) phthalocyanine and 2,3-naphthalocyanine, and nickel(II) meso-diphenylporphyrin. The synthesis of the former two macrocycles 4 and 7 involves the Sonogashira coupling reaction of ferrocenylethyne with 4,5-dichlorophthalonitrile (1) or 6,7-dibromonaphthalonitrile (5), respectively, followed by a base-promoted cyclization. The meso-bis(ferrocenylethynyl)porphyrin 11 has been prepared from the dibromo analogue 10 also by a palladium-catalyzed coupling reaction. These novel macrocyclic compounds have been spectroscopically and electrochemically characterized. As revealed by cyclic voltammetry, the ferrocenyl moieties appear to be electrochemically independent in these complexes and there is no significant electronic coupling among the iron(II) centers.     

分子筛体系的氢溢出效应

分子筛体系的氢溢出效应李晓燕，盛太成，杨孔章（山东大学化学院，济南２５０１００）关键词铂／分子筛催化剂，氢溢出，程序升温脱附负载型金属催化剂的表面氢溢出效应近年来引起了人们的重视．人们采用不同的实验方法对此进行了广泛的研究，但对以分子筛为担体的负载型...     

Preparation and properties of aromatic polyamides from 5-t-butylisophthalic acid and various aromatic diamines

Aromatic polyamides (aramids) having pendant t-butyl group were synthesized by the direct polycondensation of 5-t-butylisophthalic acid with various aromatic diamines in N-methyl-2-pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. The aramids having inherent viscosities of 0.6–2.4 dL/g were obtained in quantitative yields. These polymers were readily soluble in various solvents such as NMP,N,N-dimethylacetamide, dimethyl sulfoxide, and pyridine, and gave transparent, tough and flexible films by casting from the NMP solutions. The aramids had glass transition temperatures between 250 and 330°C, and started to lose weight around 350°C, with 10% weight loss being recorded at about 450°C in air.     

Microwave digestion and matrix separation for the determination of cadmium in urine samples by electrothermal atomization atomic absorption spectrometry using a fast temperature program

 A method is proposed which involves sample pretreatment followed by electrothermal atomic absorption spectrometry (ETAAS) for determination of cadmium in human urine. A microwave digestion system was devised to accommodate double-closed vessels for simultaneous digestion of batches of up to 24 urine samples in about 20 min. After digestion, matrix substances which might interfere were removed using silica-immobilized 8-hydroxyquinoline (I-8HOQ) columns. The analyte adsorbed on the column was then eluted with dilute nitric acid solution and determined by ETAAS using a fast temperature program. Neither ashing steps in the furnace heating program nor use of matrix modifiers was necessary. The accuracy, precision, limit of detection, and sample throughput of the method were evaluated. With meticulous control of systematic errors which may be introduced in the pretreatment procedures, the present method can serve as a reference technique for the analysis of Cd in urine samples. Received: 29 July 1996/Revised: 30 September 1996/Accepted: 13 October 1996     

Microwave digestion and matrix separation for the determination of cadmium in urine samples by electrothermal atomization atomic absorption spectrometry using a fast temperature program

 A method is proposed which involves sample pretreatment followed by electrothermal atomic absorption spectrometry (ETAAS) for determination of cadmium in human urine. A microwave digestion system was devised to accommodate double-closed vessels for simultaneous digestion of batches of up to 24 urine samples in about 20 min. After digestion, matrix substances which might interfere were removed using silica-immobilized 8-hydroxyquinoline (I-8HOQ) columns. The analyte adsorbed on the column was then eluted with dilute nitric acid solution and determined by ETAAS using a fast temperature program. Neither ashing steps in the furnace heating program nor use of matrix modifiers was necessary. The accuracy, precision, limit of detection, and sample throughput of the method were evaluated. With meticulous control of systematic errors which may be introduced in the pretreatment procedures, the present method can serve as a reference technique for the analysis of Cd in urine samples. Received: 29 July 1996/Revised: 30 September 1996/Accepted: 13 October 1996     

Direct determination of cadmium at parts-per-billion level in waters by derivative atomic absorption spectrometry using atom trapping technique

A method has been described for the direct determinations of trace cadmium using derivative atom trapping flame atomic absorption spectrometry with an improved water-cooled stainless steel trapping equipment. The characteristic concentration (gave a derivative absorbance of 0.0044) and detection limit (3sigma) of cadmium were 0.028 and 0.02 ng ml(-1) when collecting for a 1 min, respectively, which were 992 and 145-fold better than those of the conventional flame atomic absorption spectrometry. The detection limit and sensitivity of the proposed method for a 2 min collection time were 1 and 2 orders of magnitude higher than those of conventional flame atomic absorption spectrometry. The present method was applied to the determinations of cadmium in water samples with a recovery range of 91 approximately 111% and a relative standard deviation of 4.7 approximately 5.6%.     

LBL分子沉积法制备葡萄糖氧化酶电极

采用以静电力为主的逐层分子交替沉积技术制备葡萄糖氧化酶（GOD）电极.通过带有正电荷的聚二甲基二烯丙基铵盐酸盐（PDDA）和带有负电荷的GOD交替沉积在修饰有3-巯基-1-丙基磺酸钠（MPS）的金电极表面.以甲酸二茂铁为电子媒介体,用循环伏安法检测GOD电极对葡萄糖的响应.结果表明,当GOD电极组装层数小于4时,电流响应随着层数的增加而增大,超过4层时电流响应减小.其中4层GOD修饰电极的线性范围为0.55～6.63 mmol•L－1,当pH为7.0时,响应最大.同时电极的检测重现性能良好,相对标准偏差为2.4％.     

Synthesis, structural characterization and ferrimagnetic property of MnPS3 intercalated with nickel(II) cyclopolyamine complex cations

Two new intercalation compounds were prepared by the reactions of Ni(II) cyclopolyamine complex cations with a preintercalate Mn_1−xPS₃K_2x(H₂O)_y, respectively, through “ion exchange” process. Their structures were characterized by elemental analysis, X-ray powder diffraction and infrared spectroscopy. The lattice spacing increased 0.567 and 1.093 nm with respect to the pristine MnPS₃. Ferrimagnetism of the intercalates was confirmed by SQUID experiment with T_c at 40 and 33 K, respectively.     

Patterned langmuir-blodgett films of monodisperse nanoparticles of iron oxide using soft lithography

Langmuir-Blodgett (LB) films of monodisperse iron oxide nanoparticles have been successfully deposited onto patterned poly(dimethylsiloxane) surfaces. These patterned LB films of iron oxide nanoparticles were transferred onto solid substrates using micro contact printing.