Electrospray ionization collision induced dissociation of thiocarbocyanine and selenocarbocyanine dyes

The effect of the properties of sulphur and selenium atoms, the composition and location of substituents (―CH₃, ―OCH₃, ―C₂H₅, and ―C₃H₆―((N⁺Br^?)C₅H₅)), and the charge state on the collision induced dissociation (CID) behaviour of ions generated by electrospray ionization (ESI) of thiocarbocyanine and selenocarbocyanine dyes have been investigated. The results show that, for of all the examined singly charged ions, the main dissociation channel was related to the formation of distonic ions, generated as a result of cleavages within the dimethine bridge. In the case of doubly charged ions (with propyl‐pyridinium substituents), competition between fragmentation processes related to charges located at different nitrogen atoms has been observed. The S/Se replacement also has an impact on the CID behaviour of the examined carbocyanine dyes. On the basis of the performed CID MS/MS experiments, general rules for the CID of thiocarbocyanine and selenocarbocyanine dyes have been proposed.     

Preliminary thermal characterization of natural resins from different botanical sources and geological environments

The preliminary studies on thermal behavior of differently aged natural resins from Russia (Khatanga), Dominican Republic (El Valle), Colombia and Poland (Jantar) were performed. Thermal stability and behavior under elevated temperature were investigated by thermogravimetry (TG) and differential scanning calorimetry (DSC), while the differences in the structure and composition by FT-IR spectroscopy. Analyzed resins show different thermal effects during heating suggesting that possible post-reactions and structural changes occurred. TG results indicated that Dominican, Russian and Colombian resins present relatively high thermal stability under air conditions in the range of 228–300 °C, whereas the mass loss of 5mass% at about 217 °C was observed for Baltic amber. During DSC experiments, the analyzed resins expose thermal events which make impossible determination of glass transition temperature in a raw sample. The results indicate that both TG and DSC cannot be considered as methods for age dating of natural resins and more advanced techniques should be applied. Careful analysis of FT-IR data in the carbonyl region may provide additional information about the composition and history of the natural resin.

     

Magnetic properties and macroscopic heterogeneity of FeCoNbB Hitperms

Nanocrystalline ribbons of Fe_81−xCo_xNb₇B₁₂ (where x ranges from 0 to 40.5 at%) Hitperm alloys have been investigated as to their basic magnetic properties and the influence of the macroscopic heterogeneity. Different crystalline share at surfaces compared with the volume average is observed by conversion electron Mössbauer spectroscopy (CEMS) and Mössbauer spectroscopy (MS), respectively. This marks the presence of macroscopic heterogeneity in these Hitperms. The heterogeneity is generally more significant in Ar-annealed samples than in the vacuum-annealed ones. The characteristic slant hysteresis loops (hard-ribbon-axis) are seen as a rule with few exceptions. An inspection of hysteresis loop response of resin potted samples shows that the surfaces bi-axially squeeze the ribbon interior in heterogeneous Hitperms when the ribbons cool down after annealing. Certain compositions show macroscopic viscous flow prior to crystallization so the heterogeneity gets another chance to induce anisotropy during annealing. The induction attains 1.5 T but saturates poorly due to the heterogeneity and the ensuing anisotropy. Moreover the heterogeneity appears to hamper the crystallization within the ribbon interior. Unlike Finemets, the density of these Hitperms show no pronounced trend with annealing.     

Analysis of curing reaction of liquid-crystalline epoxy compositions by using temperature-modulated DSC TOPEM®

Journal of Thermal Analysis and Calorimetry - The curing behaviour of the composition of a liquid-crystalline diepoxy monomer (LCEM) with the central triaromatic mesogenic group was studied using...     

Synthesis and biological activity of new derivatives with the preserved carane system

Abstract

Terpenoid derivatives, which contain a preserved carane system in their structure, exhibit a broad spectrum of biological activities. Among them, we can distinguish insecticides, structures with pharmacological application etc. In the presented paper, the substrate - (–)-cis-caran-trans-4-ol was transformed using the reactions of typical organic synthesis to obtain novel derivatives. Most importantly, bromolactone ((–)-(1R,4R,6S)-2'-(bromomethyl)-4,7,7-trimethylspiro[bicyclo[4.1.0]heptan-3,3'-furan]-5'(4'H)-one) with the preserved carane system was synthesized. This bromolactone was tested for antifeedant activity against the lesser mealworm, Alphitobius diaperinus Panzer, and peach potato aphid (Myzus persicae). In addition, its moderate antibacterial activity was observed against the Bacillus subtilis strain (with Minimal Inhibitory Concentration of 200 µg/mL).     

Monodisperse magnetic poly(glycidyl methacrylate) microspheres for isolation of autoantibodies with affinity for the 46 kDa form of unconventional Myo1C present in autoimmune patients

Monodisperse nonmagnetic macroporous poly(glycidyl methacrylate) (PGMA) microspheres were synthesized by multistep swelling polymerization of glycidyl methacrylate, ethylene dimethacrylate and 2-[(methoxycarbonyl)methoxy]ethyl methacrylate (MCMEMA). This was followed (a) by ammonolysis to modify the microspheres with amino groups, and (b) by incorporation of iron oxide (γ-Fe₂O₃) into the pores to render the particles magnetic. The resulting porous and magnetic microspheres were characterized by scanning and transmission electron microscopy (SEM and TEM), atomic absorption and Fourier transform infrared spectroscopy (AAS and FTIR), elemental analysis, vibrating magnetometry, mercury porosimetry and Brunauer-Emmett-Teller adsorption/desorption isotherms. The microspheres are meso- and macroporous, typically 5 μm in diameter, contain 0.9 mM · g^?1 of amino groups and 14 wt.% of iron according to elemental analysis and AAS, respectively. The particles were conjugated to p46/Myo1C protein, a potential biomarker of autoimmune diseases, to isolate specific autoantibodies in the blood of patients suffering from multiple sclerosis (MS). The p46/Myo1C loaded microspheres are shown to enable the preconcentration of minute quantities of specific immunoglobulins prior to their quantification via SDS-PAGE. The immunoglobulin M (IgM) with affinity to Myo1C was detected in MS patients.

Open image in new window

Graphical abstract Monodisperse magnetic poly(glycidyl methacrylate) microspheres were synthesized, conjugated with 46 kDa form of unconventional Myo1C protein (p46/Myo1C) via carbodiimide (DIC) chemistry, and specific autoantibodies isolated from blood of multiple sclerosis (MS) patients; immunoglobulin M (IgM) level increased in MS patients.

     

Facilitated transport of palladium(II) across polymer inclusion membrane with ammonium ionic liquid as effective carrier

This work focuses on the application of polymer inclusion membrane (PIM) with tricaprylmethylammonium thiosalicylate, [A336][TS] (TOMATS), a thiol-containing task-specific ionic liquid for the transport of Pd(II) ions from aqueous solutions. 0.3 M thiourea in 0.1 M hydrochloric acid was found the most effective stripping phase in the transport of Pd(II) from membrane phase containing TOMATS. Separation of Pd(II) ions was also carried out from hydrochloric acid solution containing Pt(IV), Fe(III), Ni(II), and Mn(II). Pd(II) ions were preferably transported in the presence of these metal ions. The separation coefficients followed the order: S _Pd/Pt < S _Pd/Fe < S _Pd/Ni < S _Pd/Mn. [A336][TS] proved to be an excellent ion carrier for Pd(II) from hydrochloric acid solution. The results also showed that transport efficiency of the PIM was reproducible and it can be useful for the development of the simple and highly effective method of Pd(II) recovery from leach liquor of spent catalysts.     

Effect of Re addition on the crystallization,heat treatment and structure of the Cu–Ni–Si-Cr alloy

Differential scanning calorimetry (DSC) was used to investigate the thermal behavior and non-isothermal crystallization kinetics of the Fe₆₇Nb₅B₂₈ metallic glasses prepared by melt-spinning method. DSC traces exhibit that the crystallization takes place through a single exothermic reaction, and it processes a good thermal stability in thermodynamics. The activation energies for nucleation and grain growth processes were calculated to be 536 ± 22 and 559 ± 20 kJ mol^?1 by Kissinger equation, respectively, and 551 ± 24 and 574 ± 20 kJ mol^?1 by Ozawa equation, respectively. It means that the grain growth process is more difficult than the nucleation process. The variation of local Avrami exponent n(x) with crystallized fraction x demonstrates that the crystallization mechanism varies at different stages. The n(x) is larger than 2.5 at the initial stage of 0 < x < 0.3, implying a mechanism of diffusion-controlled three-dimensional growth with increasing nucleation rate. The n(x) decreases from 2.5 to 1.5 in the range of 0.3 < x < 0.65, suggesting that the crystallization belongs to three-dimensional nucleation and grain growth with decreasing nucleation rate. And n(x) lies between 1.0 and 1.5 in the range of 0.65 < x < 0.95, indicating that the crystallization corresponds to the growth of particles with an appreciable initial volume. Low-temperature annealing corresponds to the precipitation of α-Fe, Fe₂B, and Fe₂₃B₆ phases, and further annealing leads to the formation of α-Fe, Fe₂B, and FeNbB phases. The magnetic properties in relation to microstructure change of the Fe₆₇Nb₅B₂₈ metallic glasses are discussed.