Measurements of indoor radon concentration levels in Kilis,Osmaniye and Antakya,Turkey during spring season

The fact that 50% of the natural radiation dose to which humans are exposed is caused by radon gas makes indoor radon measurements important. In this study, levels of indoor radon gas were measured in 204 houses in Kilis, Osmaniye and Antakya using passive nuclear track detectors. Cr-39 radon detectors were left in the living rooms of participants’ houses, then analyzed at the Radon Laboratory of Health Physics Department in Çekmece Nuclear Research and Training Center (ÇANEM) of Atomic Energy Agency of Turkey (TAEK). Average indoor radon activity concentrations for Kilis, Osmaniye and Antakya were 50 Bq/m³ (1.26 mSv/y), 51 Bq/m³ (1.29 mSv/y) and 40 Bq/m³ (1.01 mSv/y), respectively.     

Thermal analysis of a white calcium bentonite

A white calcium bentonite (CaB) taken from Çaml?dere (Ankara, Turkey) region was heated at various temperatures between 100 and 1100 °C for 2 h. The mineralogy of the CaB was determined as calcium smectite (CaS), metahalloysite (MH), opal-A (OA), opal-CT (OCT), quartz (Q), feldspar (F), and calcite (C) using the X-ray diffraction patterns of the natural CaB and its heated samples. Besides the XRD patterns, the thermogravimetry, differential thermal analysis, and low-temperature nitrogen adsorption (N₂-AD) data show that the CaS lose adsorbed and hydration water up to 300 °C, dehydroxylation takes place between 300 and 750 °C, and then the 2:1 layer structure completely collapses above 900 °C. The activation energies for the dehydration and dehydroxylation were calculated as 7636 and 48838 J mol^?1, respectively, from the TG data using Coats and Redfern method. The specific surface area (S) and specific micro–mesopore volume (V) obtained from N₂-AD data were 44 m² g^?1 and 0.100 cm³ g^?1 for the natural CaB. S and V reach their maxima of 105 m² g^?1 and 0.155 cm³ g^?1, respectively, at 300 °C, remain approximately constant as the temperature increases up to 700 °C and then decrease almost in parallel with each other, reaching their minima at 900 °C. This indicates that the S and V values increase gradually during dehydration and dehydroxylation of the CaS.     

Chemical composition and antimicrobial activity of essential oil of Achillea cretica L. (Asteraceae) from Turkey

Hydrodistilled volatile oil from the aerial parts of Achillea cretica L. (Asteraceae) was analysed by a combination of GC and GC/MS. Seventy-six components were identified, constituting 86.4% of the oil. The main constituents of the essential oil were caryophylladienol-II (13.4%), β-maaliene (6.1%), neo-intermedeol (6.0%), carvone (4.9%), spathulenol (4.5%), palmitic acid (3.3%) and selina-3,11-dien-6α-ol (3.2%). The antimicrobial activity was evaluated by the broth-dilution method on nine microbial strains and showed to be quite strong against the Gram-positive bacteria Staphylococcus aureus and Bacillus cereus. The antibacterial properties of A. cretica justify its use in traditional medicine for the treatment of wounds, contaminated through bacterial infections.     

Dynamic phase transitions and dynamic phase diagrams in the kinetic spin-5/2 Blume-Capel model in an oscillating external magnetic field: Effective-field theory and the Glauber-type stochastic dynamics approach

Using an effective field theory with correlations, we study a kinetic spin-5/2 Blume-Capel model with bilinear exchange interaction and single-ion crystal field on a square lattice. The effective-field dynamic equation is derived by employing the Glauber transition rates. First, the phases in the kinetic system are obtained by solving this dynamic equation. Then, the thermal behavior of the dynamic magnetization, the hysteresis loop area and correlation are investigated in order to characterize the nature of the dynamic transitions and to obtain dynamic phase transition temperatures. Finally, we present the phase diagrams in two planes, namely (T/zJ, h₀/zJ) and (T/zJ, D/zJ), where T absolute temperature, h₀, the amplitude of the oscillating field, D, crystal field interaction or single-ion anisotropy constant and z denotes the nearest-neighbor sites of the central site. The phase diagrams exhibit four fundamental phases and ten mixed phases which are composed of binary, ternary and tetrad combination of fundamental phases, depending on the crystal field interaction parameter. Moreover, the phase diagrams contain a dynamic tricritical point (T), a double critical end point (B), a multicritical point (A) and zero-temperature critical point (Z).     

Compensation temperatures,magnetic susceptibilities and phase diagrams of a mixed ferrimagnetic ternary system on the Bethe lattice

Compensation behaviors, magnetic susceptibilities and the phase diagrams of the ternary system of the type ABC consisting of Ising spins σ = 1/2, S = 3/2 and m = 5/2 in the presence of a single-ion anisotropy are studied on the Bethe lattice within the framework of the exact recursion relations. Both ferromagnetic and antiferromagnetic exchange interactions are considered. The exact expressions for sublattice magnetizations and magnetic susceptibilities are obtained, and then thermal behaviors of the sublattice magnetizations, total magnetization, magnetic sublattice susceptibilities and total susceptibility are investigated. We find that the system only undergoes a second order phase transition for the different and same bilinear nearest-neighbor exchange interaction parameters, but displays compensation behaviors for only different bilinear interaction parameters. We also present the phase diagrams for the different and same bilinear nearest-neighbor exchange interaction parameters. A comparison is made with the other ternary system of the type ABC consisting of different spin values.     

Non-existence of Warped Product Semi-Slant Submanifolds of Kaehler Manifolds

In this paper, we show that there are no warped product semi-slant submanifolds of Kaehler manifolds. Contrary to this result,we provide an elementary example of a CR-warped product submanifold of a Kaehler manifold     

Usage of Biogenic Apatite (Fish Bones) on Removal of Basic Fuchsin Dye from Aqueous Solution

The contamination with toxic dyes is the most important problem facing all over the world for water sources, environment and living beings. Therefore, in present study, the removal of fuchsin dye from aqueous environment was investigated using fish bones as source of biogenic apatite to the best removal efficiency. The removal efficiency of the adsorbent was investigated as a function of contact time and initial dye concentration. The highest removal capacity was found to 14.75 mg/g. The experimental data generally exhibit a good compliance with the pseudo-second-order equation. Langmuir and Freundlich models were also applied to experimental equilibrium data to find the best adsorption isotherm. Weber-Morris and Urano-Tachikawa models were used to calculate diffusion constants. The results were showed that fish bones can be effectively used as a sorbent for the removal of basic dyes from aqueous solutions.     

Is it homogeneous or heterogeneous catalysis derived from [RhCp*Cl2]2? In operando XAFS, kinetic, and crucial kinetic poisoning evidence for subnanometer Rh4 cluster-based benzene hydrogenation catalysis

Determining the true, kinetically dominant catalytically active species, in the classic benzene hydrogenation system pioneered by Maitlis and co-workers 34 years ago starting with [RhCp*Cl(2)](2) (Cp* = [η(5)-C(5)(CH(3))(5)]), has proven to be one of the most challenging case studies in the quest to distinguish single-metal-based "homogeneous" from polymetallic, "heterogeneous" catalysis. The reason, this study will show, is the previous failure to use the proper combination of: (i) in operando spectroscopy to determine the dominant form(s) of the precatalyst's mass under catalysis (i.e., operating) conditions, and then crucially also (ii) the previous lack of the necessary kinetic studies, catalysis being a "wholly kinetic phenomenon" as J. Halpern long ago noted. An important contribution from this study will be to reveal the power of quantitiative kinetic poisoning experiments for distinguishing single-metal, or in the present case subnanometer Rh(4) cluster-based catalysis, from larger, polymetallic Rh(0)(n) nanoparticle catalysis, at least under favorable conditions. The combined in operando X-ray absorption fine structure (XAFS) spectroscopy and kinetic evidence provide a compelling case for Rh(4)-based, with average stoichiometry "Rh(4)Cp*(2.4)Cl(4)H(c)", benzene hydrogenation catalysis in 2-propanol with added Et(3)N and at 100 °C and 50 atm initial H(2) pressure. The results also reveal, however, that if even ca. 1.4% of the total soluble Rh(0)(n) had formed nanoparticles, then those Rh(0)(n) nanoparticles would have been able to account for all the observed benzene hydrogenation catalytic rate (using commercial, ca. 2 nm, polyethyleneglycol-dodecylether hydrosol stabilized Rh(0)(n) nanoparticles as a model system). The results--especially the poisoning methodology developed and employed--are of significant, broader interest since determining the nature of the true catalyst continues to be a central, often vexing issue in any and all catalytic reactions. The results are also of fundamental interest in that they add to a growing body of evidence indicating that certain, appropriately ligated, coordinatively unsaturated, subnanometer M(4) transition-metal clusters can be relatively robust catalysts. Also demonstrated herein is that Rh(4) clusters are poisoned by Hg(0), demonstrating for the first time that the classic Hg(0) poisoning test of "homogeneous" vs "heterogeneous" catalysts cannot distinguish Rh(4)-based subnanometer catalysts from Rh(0)(n) nanoparticle catalysts, at least for the present examples of these two specific, Rh-based catalysts.     

Mixed spin-1 and spin-3/2 Ising system with two alternative layers of a honeycomb lattice within the effective-field theory

An effective-field theory with correlations is developed for a mixed spin-1 and spin-3/2 Ising system with two alternative layers of a honeycomb lattice. Spin-1 atoms and spin-3/2 atoms are distributed in alternative layers of a honeycomb lattice. We consider that the nearest-neighbor spins of each layer are coupled ferromagnetically and the interaction between the vertically aligned spins and adjacent spins are coupled either ferromagnetically or antiferromagnetically depending on the sign of the bilinear exchange interactions. We investigate the temperature dependence of the total magnetization to find the compensation points and to determine the type of compensation behavior. We present the phase diagrams in different planes for h=0, and the phase diagrams contain the paramagnetic, nonmagnetic and ferrimagnetic phases. The system also presents a tricritical behavior besides multicritical point (A), isolated critical point (C) and double critical end point (B) depending on the interaction parameters.