Head and bit patterned media optimization at areal densities of 2.5 Tbit/in and beyond

Global optimization of writing head is performed using micromagnetics and surrogate optimization. The shape of the pole tip is optimized for bit patterned, exchange spring recording media. The media characteristics define the effective write field and the threshold values for the head field that acts at islands in the adjacent track. Once the required head field characteristics are defined, the pole tip geometry is optimized in order to achieve a high gradient of the effective write field while keeping the write field at the adjacent track below a given value. We computed the write error rate and the adjacent track erasure for different maximum anisotropy in the multilayer, graded media. The results show a linear trade off between the error rate and the number of passes before erasure. For optimal head media combinations we found a bit error rate of 10⁻⁶ with 10⁸ pass lines before erasure at 2.5 Tbit/in².     

Recyclable clay supported Cu (II) catalyzed tandem one-pot synthesis of 1-aryl-1,2,3-triazoles

Montmorillonite KSF clay supported CuO nanoparticles efficiently catalyzes one-pot aromatic azidonation of aryl boronic acids followed by regioselective azide–alkyne 1,3-dipolar cycloaddition (CuAAC) reaction producing corresponding 1-aryl-1,2,3-triazole derivatives at room temperature in excellent yields without use of any additives. Investigations on mechanism of CuAAC revealed that sodium azide, which is used as azidonating reagent in one-pot protocol reduces Cu(II) to click-active Cu(I). The catalytic efficiency of another Cu(II) source CuSO₄ in combination with NaN₃ for this one-pot CuAAC protocol, further supported our mechanism. This is the first report for use of Cu(II)/NaN₃ catalytic system for CuAAC protocol. The clay–Cu(II) catalyst being ligand-free, leaching-free, easy to synthesize from inexpensive commercially available precursors, recyclable, and environmentally friendly will be highly useful for economical synthesis of 1,4-disubstituted 1,2,3-triazoles.     

Synthesis of high performance,conductive PEDOT‐coated polyester yarns by OCVD technique

Production of high performance conductive textile yarn fibers for different electronic applications has become a prominent area of many research groups throughout the world. We have used oxidative chemical vapor deposition (OCVD) technique to coat flexible and high strength polyester yarns with conjugated polymer, poly(3,4‐ethylenedioxythiophene) (PEDOT) in presence of ferric (III) chloride (FeCl₃) oxidant. OCVD is an efficient solvent free technique used to get uniform, thin, and highly conductive polymer layers on different substrates. In this paper, PEDOT‐coated polyester (PET) yarns were prepared under specific reaction conditions, and the electrical, mechanical and thermal properties were compared to previously studied PEDOT‐coated viscose yarns. Scanning electron microscopy (SEM) and FT‐IR analysis revealed that polymerization of PEDOT on the surface of the polyester yarns has been taken place successfully and structural analysis showed that PEDOT has strong interactions with viscose yarns as compared to PET yarns. The voltage–current (V–I) characteristics showed that PET yarns are more conductive than PEDOT‐coated viscose yarns. The variation in the conductivity of PEDOT‐coated yarns and the heat generation properties during the flow of current through coated yarns for longer period of time, was studied by time–current (t–I) characteristics. Thermogravimeteric analysis (TGA) was employed to investigate the thermal properties and the amount of PEDOT in PEDOT‐coated PET yarns compared to PEDOT‐coated viscose. The effect of PEDOT coating and ferric (III) chloride concentration on the mechanical properties of coated yarns was evaluated by tensile testing. The obtained PEDOT‐coated conductive polyester yarns could be used in smart clothing for medical and military applications. Copyright © 2011 John Wiley & Sons, Ltd.     

A study of nonlinear Langevin equation involving two fractional orders in different intervals

This paper studies a nonlinear Langevin equation involving two fractional orders α∈(0,1] and β∈(1,2] with three-point boundary conditions. The contraction mapping principle and Krasnoselskii’s fixed point theorem are applied to prove the existence of solutions for the problem. The existence results for a three-point third-order nonlocal boundary value problem of nonlinear ordinary differential equations follow as a special case of our results. Some illustrative examples are also discussed.     

Effects of electromagnetic field on energy density inhomogeneity in self-gravitating fluids

This paper is devoted to study the effects of electromagnetic field on the energy density inhomogeneity in the relativistic self-gravitating fluids for spherically symmetric spacetime. Two important equations of the Weyl tensor are formulated which help to analyze the energy density inhomogeneity in this scenario. We investigate two types of fluids, i.e., non-dissipative and dissipative. The non-dissipative fluid further includes dust, locally isotropic, and locally anisotropic charged fluids. We explore the effects of different factors on energy density inhomogeneity in all these cases, in particular, the effect of charge.     

Effect of ZnO Nanofiller on Structural and Electrochemical Performance Improvement of Solid Polymer Electrolytes Based on Polyvinyl Alcohol–Cellulose Acetate–Potassium Carbonate Composites

In this study, a solution casting method was used to prepare solid polymer electrolytes (SPEs) based on a polymer blend comprising polyvinyl alcohol (PVA), cellulose acetate (CA), and potassium carbonate (K₂CO₃) as a conducting salt, and zinc oxide nanoparticles (ZnO-NPs) as a nanofiller. The prepared electrolytes were physicochemically and electrochemically characterized, and their semi-crystalline nature was established using XRD and FESEM. The addition of ZnO to the polymer–salt combination resulted in a substantial increase in ionic conductivity, which was investigated using impedance analysis. The size of the semicircles in the Cole–Cole plots shrank as the amount of nanofiller increased, showing a decrease in bulk resistance that might be ascribed to an increase in ions due to the strong action of the ZnO-NPs. The sample with 10 wt % ZnO-NPs was found to produce the highest ionic conductivity, potential window, and lowest activation energy (E_a) of 3.70 × 10^–3 Scm^–1, 3.24 V, and 6.08 × 10^–4 eV, respectively. The temperature–frequency dependence of conductivity was found to approximately follow the Arrhenius model, which established that the electrolytes in this study are thermally activated. Hence, it can be concluded that, based on the improved conductivity observed, SPEs based on a PVA-CA-K₂CO₃/ZnO-NPs composite could be applicable in all-solid-state energy storage devices.     

Virtual Screening of Artemisia annua Phytochemicals as Potential Inhibitors of SARS-CoV-2 Main Protease Enzyme

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is a human coronaviruses that emerged in China at Wuhan city, Hubei province during December 2019. Subsequently, SARS-CoV-2 has spread worldwide and caused millions of deaths around the globe. Several compounds and vaccines have been proposed to tackle this crisis. Novel recommended in silico approaches have been commonly used to screen for specific SARS-CoV-2 inhibitors of different types. Herein, the phytochemicals of Pakistani medicinal plants (especially Artemisia annua) were virtually screened to identify potential inhibitors of the SARS-CoV-2 main protease enzyme. The X-ray crystal structure of the main protease of SARS-CoV-2 with an N3 inhibitor was obtained from the protein data bank while A. annua phytochemicals were retrieved from different drug databases. The docking technique was carried out to assess the binding efficacy of the retrieved phytochemicals; the docking results revealed that several phytochemicals have potential to inhibit the SARS-CoV-2 main protease enzyme. Among the total docked compounds, the top-10 docked complexes were considered for further study and evaluated for their physiochemical and pharmacokinetic properties. The top-3 docked complexes with the best binding energies were as follows: the top-1 docked complex with a −7 kcal/mol binding energy score, the top-2 docked complex with a −6.9 kcal/mol binding energy score, and the top-3 docked complex with a −6.8 kcal/mol binding energy score. These complexes were subjected to a molecular dynamic simulation analysis for further validation to check the dynamic behavior of the selected top-complexes. During the whole simulation time, no major changes were observed in the docked complexes, which indicated complex stability. Additionally, the free binding energies for the selected docked complexes were also estimated via the MM-GB/PBSA approach, and the results revealed that the total delta energies of MMGBSA were −24.23 kcal/mol, −26.38 kcal/mol, and −25 kcal/mol for top-1, top-2, and top-3, respectively. MMPBSA calculated the delta total energy as −17.23 kcal/mol (top-1 complex), −24.75 kcal/mol (top-2 complex), and −24.86 kcal/mol (top-3 complex). This study explored in silico screened phytochemicals against the main protease of the SARS-CoV-2 virus; however, the findings require an experimentally based study to further validate the obtained results.     

Necessary and sufficient conditions for oscillation of second‐order dynamic equations on time scales

In this paper, we establish necessary and sufficient conditions for oscillation of second‐order strongly superlinear and strongly sublinear dynamic equations. Our results unify and improve many known results in the literature.     

Spectrophotometric determination of acetone in acetic acid

A sensitive and selective spectrophotometric method for the determination of acetone in acetic acid has been worked out. It is based on the reaction of acetone with diazotized p-aminobenzoic acid in a strongly alkaline medium to form a purple color with maximum absorption at 540 nm. Beer's law holds up in the range 20–140 μg of acetone in a final volume of 20 ml, with a molar absorptivity of 8.1 × 10³ liters mol^?1 cm^?1, sensitivity index of 0.0072 μg cm^?2, relative error of ?1.9 to +0.6%, and relative standard deviation of 0.7–3.5, depending on the concentration level. Furthermore, the color reaction is fast, and the procedure is simple, and avoids the use of an extraction.     

Matrix-assisted laser desorption/ionization mass spectrometry with re-engineered 2,5-dihydroxybenzoic acid derivative

Dihydroxybenzoic acid was modified to three analogues (M2, M4 and M6). The analogues exhibited specific properties that resulted in enhancement of analyte signal intensity with or without addition of iodine compared to the underivatized parent. Addition of iodine to M2, an ester of dihydroxybenzoic acid that had a terminal double bond in the alkyl chain, resulted in peak intensities comparable to the parent, indicating that iodine interaction across the double bond resulted in enhancement although the exact mechanism is not fully understood. No enhancement on addition of iodine was observed for M4, which had a long alkyl chain that contained no double bonds. The alkyl chain allowed micelle formation in solution, which in turn allowed more uniform analyte-to-matrix mixing. The final analogue combined the long alkyl chain of M4 with the double bond of M2 and exhibited either similar peak intensities to that of dihydroxybenzoic acid or better. Micelle formation in solution was examined using spectroscopy and in the solid by reflective microscopy. The standard deviation from spot to spot was considerably lower relative to dihydroxybenzoic acid (RSD 3.4%vs. 14.2%). Unlike dihydroxybenzoic acid, the novel matrix M6 was able to yield characteristic peaks for analytes such as ubiquitin.