Emulsion polymerization of styrene and methyl methacrylate using a hydrophobically modified inulin and comparison with other surfactants

The use of a new class of graft polymer surfactants, based on inulin, in emulsion polymerization of poly(methyl methacrylate) (PMMA) and polystyrene (PS) particles is described. PS and PMMA were synthesized by emulsion polymerization, and stable particles with a high monomer content (50 wt %) were obtained with a very small amount of polymeric surfactant ([surfactant]/[monomer] = 0.0033). The latex dispersions were characterized by dynamic light scattering and by transmission electron microscopy to obtain the average particle size and the polydispersity index, and the stability was determined by turbidimetry measurements and expressed in terms of critical coagulation concentration. The last section gives a comparison of PMMA particles prepared by emulsion polymerization using classical surfactants from different types as emulsifiers with that obtained using the copolymer surfactant. It shows the superiority of INUTEC SP1 as it is the only one that allows stable particles at 20 wt % monomer content, with a smaller ratio [surfactant]/[monomer] = 0.002.     

Exact mass measurement of product ions for the structural confirmation and identification of unknown compounds using a quadrupole time-of-flight spectrometer: a simplified approach using combined tandem mass spectrometric functions

This article describes a simple method to perform lock mass corrected accurate mass measurements in tandem mass spectrometry (MS/MS) with a quadrupole time-of-flight (Q-TOF) mass spectrometer. The experimental approach consists of using the protonated molecule of a known compound, which is measured in a MS/MS function using low collision energy (no fragmentation), as mass calibrator. The unknown compound is acquired in MS/MS mode albeit using high collision energy. After the acquisition, the two MS/MS spectra of unknown and mass calibrator are combined, and the fragments of the unknown are lock mass corrected by using the protonated molecule of the mass calibrator. To prove this concept, 10 compounds were analyzed using this approach, the fragments interpreted and, where possible, related to structural data available in the literature. All the unequivocally assigned fragments were accurately mass measured with mass errors within appropriate limits, i.e. for m/z values <200 with a mass tolerance of 3 mDa while for m/z > 200 the mass tolerance is expressed as 10 ppm.     

Monitoring of optical isomers of chiral alcohols and derivatives by chiral gas chromatography. Effect of derivatization on the enantio-differentiation

Summary Gas chromatographic chiral separation of several chiral 2-and 3-alkanols and diols was studied both in their free hydroxyl and in their trimethylsilyl ether forms. First, the derivatization procedure was verified through the identification of the trimethylsilyl ethers formed on the basis of their mass spectra and optimized to obtain quantitative reaction. The optimized procedure was applied to the trimethylsilylation of racemic mixtures of various hydroxyl compounds. The silylation was found to be highly effective in the improvement of the separation of the individual enantiomers. The major advantages of the derivatization process can be summarized as: (i) excellent baseline separation of the enantiomers of the silyl ethers was achieved in contrast to the parent OH-containing compounds, (ii) the sensitivity of detection highly increased, (iii) the separations do not show any significant concentration dependence and finally (iv) the analysis time needed decreased significantly. Presented at: Balaton Symposium on High-Performance Separation Methods, Siófok, Hungary, September 3–5, 1997     

Capillary electrophoretic studies of acid-base properties of sanguinarine and chelerythrine alkaloids

Capillary zone electrophoresis with UV detection was used for determination of dissociation constants of alkaloids sanguinarine and chelerythrine. Despite the limited solubility of the uncharged forms of the alkaloids resulting in insufficient analytical signal at higher pH the reliable dissociation constants were obtained when acidified samples containing low amount of the alkaloid were injected into the capillary. The precipitation of the alkaloid in the capillary induced by injecting sample of low pH into the background electrolyte of higher pH does not affect the mobility of the alkaloid if its concentration injected exceeds the solubility only to a small extent. Dissociation constants (pK(R+)) of sanguinarine and chelerythrine calculated to 8.3 +/- 0.1 and 9.2 +/- 0.1, respectively, are relevant to Good buffers of ionic strength of 30 mM.     

Synthesis of the dibenzo[f,h]phthalazine and dibenzo[f,h]cinnoline skeleton via a ‘Suzuki-Pd-catalyzed intramolecular arylation’ and a ‘Suzuki-Pschorr’ approach

Palladium-catalyzed intramolecular arylation of 2-benzyl-5-(2-bromophenyl)-4-phenylpyridazin-3(2H)-one yielded hitherto unknown 2-benzyldibenzo[f,h]phthalazin-1(2H)-one. The synthesis of this new tetracyclic pyridazinone from 2-benzyl-5-(2-aminophenyl)-4-phenylpyridazin-3(2H)-one via a Pschorr type reaction was also investigated. Similarly, the construction of 2-methyldibenzo[f,h]cinnolin-3(2H)-one from 2-methyl-5-(2-bromophenyl)-6-phenylpyridazin-3(2H)-one and 2-methyl-5-(2-aminophenyl)-6-phenylpyridazin-3(2H)-one is also reported. Removal of the N-benzyl protective group of 2-benzyl-dibenzo[f,h]phthalazin-1(2H)-one with AlCl₃ yielded unsubstituted dibenzo[f,h]phthalazin-1(2H)-one.     

Application of a retention database to the identification of individual polychlorinated biphenyl congeners in Aroclors mixture using selected polychlorinated biphenyls as a reference series

The database of the relative retention times (RRTs) of polychlorinated biphenyls (PCBs) reported in literature was used to calculate the retention indices (RIs) of all 209 PCB congeners on temperature programmed capillary column Rtx-5. Calculation of retention indices was based on reference series of seven congeners (PCB IUPAC Nos. 18, 52, 101, 143, 185, 203 and 206) that exhibit linear relative retention time behaviour as a function of chlorine number. The calculated indices were compared to those determined in our laboratory as well as to those obtained by other authors. The proposed indices system was applied for identification individual congeners in mixture of Aroclors 1242:1254:1260, using only reference series of PCBs.     

Identification and quantification of the antipsychotics risperidone,aripiprazole, pipamperone and their major metabolites in plasma using ultra‐high performance liquid chromatography–mass spectrometry

The antipsychotics risperidone, aripiprazole and pipamperone are frequently prescribed for the treatment in children with autism. The aim of this study was to validate an ultra‐high performance liquid chromatography–mass spectrometry method for the quantification of these antipsychotics in plasma. An ultra‐high performance liquid chromatography–mass spectrometry assay was developed for the determination of the drugs and metabolites. Gradient elution was performed on a reversed‐phase column with a mobile phase consisting of ammonium acetate, formic acid in methanol or in Milli‐Q ultrapure water at a flow rate of 0.5 mL/min. The method was validated according to the US Food and Drug Administration guidelines. The analytes were found to be stable enough after reconstitution and injection of only 5 μL improved the accuracy and precision in combination with the internal standard. Calibration curves of all five analytes were linear. All analytes were stable for at least 72 h in the autosampler and the high quality control of 9‐OH‐risperidone was stable for 48 h. The method allows quantification of all analytes. The advantage of this method is the combination of a minimal injection volume, a short run‐time, an easy sample preparation method and the ability to quantify all analytes in one run. Copyright © 2015 John Wiley & Sons, Ltd.