Bulk derivatization and cation exchange restricted access media-based trap-and-elute liquid chromatography–mass spectrometry method for determination of trace estrogens in serum

Estrone (E1), estradiols (α/β-E2), and estriol (E3) are four major metabolically active estrogens exerting strong biological activities at very low circulating concentrations. This paper reports a sensitive and efficient method with automated, on-line clean-up and detection to determine trace estrogens in a small volume of serum samples using liquid chromatography–electrospray ionization–tandem mass spectrometry directly, without off-line liquid–liquid or solid-phase extraction pretreatments. Serum aliquots (charcoal stripped fetal bovine serum, 100 μL) were spiked with four estrogen standards and their corresponding isotope-labeled internal standards, then bulk derivatized with 2-fluoro-1-methyl-pyridium p-toluenesulfonate (2-FMP) to establish the calibration curves and perform method validation. Calibration was established in the concentration ranges of 5–1000 pg mL⁻¹, and demonstrated good linearity of R² from 0.9944 to 0.9997 for the four derivatized estrogens. The lower detection limits obtained were 3–7 pg mL⁻¹. Good accuracy and precision in the range of 86–112% and 2.3–11.9%, respectively, were observed for the quality control (QC) samples at low, medium, and high concentration levels. The stability tests showed that the derivatized serum samples were stable 8 h after derivatization at room temperature and at least to 48 h if stored at −20 °C. The method was applied to measure trace estrogens in real human and bovine serum samples, and three of four estrogen compounds studied were observed and quantified.     

Correlation of optical properties with the fractal microstructure of black molybdenum coatings

Coating is commonly used for improving the optical properties of surfaces for solar collector applications. The coating morphology depends on the deposition conditions, and this determines the final optical characteristics. Coating morphologies are irregular and of fractal nature, so a suitable approach for its characterization should use methods borrowed from fractal analysis. The aim of this work is to study the fractal characteristics of black molybdenum coatings on copper and to relate the fractal parameters to the optical properties. To this end, coating surfaces were prepared via immersion in a solution of ammonium paramolybdate for different deposition periods. The fractal analysis was carried out for SEM and AFM images of the coating surface and the fractal properties were obtained with a recently developed high-dimensional extension of the well-known detrended fluctuation analysis (DFA). The most salient parameter drawn from the application of the DFA is the Hurst index, a parameter related to the roughness of the coating surface, and the multifractality index, which is related to the non-linearity features of the coating morphology. The results showed that optical properties, including absorptance and emittance, are decreasing functions of the Hurst and multifractality indices. This suggests that coating surfaces with high absorptance and emittance values are related to complex coating morphologies conformed within a non-linear structure.     

Filling polygonal holes with minimal energy surfaces on Powell-Sabin type triangulations

In this paper we present two different methods for filling in a hole in an explicit 3D surface, defined by a smooth function f in a part of a polygonal domain D⊂R². We obtain the final reconstructed surface over the whole domain D. We do the filling in two different ways: discontinuous and continuous. In the discontinuous case, we fill the hole with a function in a Powell-Sabin spline space that minimizes a linear combination of the usual seminorms in an adequate Sobolev space, and approximates (in the least squares sense) the values of f and those of its normal derivatives at an adequate set of points. In the continuous case, we will first replace f outside the hole by a smoothing bivariate spline s_f, and then we fill the hole also with a Powell-Sabin spline minimizing a linear combination of given seminorms. In both cases, we obtain existence and uniqueness of solutions and we present some graphical examples, and, in the continuous case, we also give a local convergence result.     

On subfÌields of radical extensions

A Jordan pair is constructed from a pair of cubic forms satisfying the adjoint identities. Given some parameters and an incidence structure S having three points on each line and no more than one line through two points, a pair of cubic forms are constructed. These forms satisfy the adjoint identities if and only if S is either a star or a generalized quadrangle and the parameters are precisely determined.     

Chalcedony (a crystalline variety of silica): biogenic origin in electric organs from living Psammobatis extenta (family Rajidae)

The electric organs of electric fish have been used extensively for the study of peripheral cholinergic synapses. Aluminum and silicon have been observed in the electrocytes of Psammobatis extenta, a fish belonging to the family Rajidae, using a combination of scanning electron microscopy and X-ray spectrometry. Based on this evidence, the presence of silica minerals has been documented by means of mineralogical techniques. Electric organ cryostat sections and subcellular fractions were observed using a Leica DMLP mineralogical microscope. The shape, size and color, among other properties, were analyzed in plane-polarized light, while birefringence and the extinction angle, which allow for mineral identification, were observed through crossed-polarized illumination. The distribution of chalcedony, an oxide silicon mineral, in the sections and all the fractions of the electric organ was recorded. X-ray diffraction analysis of the electric organ segments showed a similar result, with a low-quartz variety. Chalcedony precipitation occurred at a specific pH (7-8) and oxidation potential (Eh; 0.0 to -0.2). This observation supports the important role played by pH and Eh conditions in silica precipitation in electrocytes, as has been reported in geological environments. It is possible that silica formation and silica degradation in electric organs are also related to the enzymes, silicatein and silicase, that direct the polymerization and depolymerization of amorphous silica in sponges. Carbonic anhydrases (silicase) are involved in physiological pH regulation. Crystallization of chalcedony via spiral growth from a partially polymerized fluid is consistent with processes known to occur in organic systems. This is the first time that a biogenically produced crystalline mineral phase (i.e., chalcedony) has been observed in the electrocytes and cholinergic nerves from living electric fish.     

Automated analysis of the architecture of receptors, imaged by atomic force microscopy

Fast neurotransmission involves the operation of ionotropic receptors, which are multi-subunit proteins that respond to activation by opening an integral ion channel. Examples of such channels include the GABA(A) receptor, the 5-HT(3) receptor and the P2X receptor for ATP. These receptors contain more than one type of subunit, although the exact subunit stoichiometry and arrangement around the receptor rosette is often unknown. We are using atomic force microscopy (AFM) of purified receptors to address these issues. Measurement of the molecular volume of the receptor permits the determination of the number of subunits that it contains. Furthermore, analysis of the geometry of complexes between receptors and subunit-specific antibodies reveals the subunit arrangement. Our AFM-based approach has so far been dependent on manual data processing, which is both time-consuming and prone to operator bias. In this study, we set out to develop a novel method capable of automatic segmentation and quantitative analysis of both single receptor particles and receptor-antibody complexes. The method was validated using images of wild type and mutant forms of the P2X(6) receptor. We suggest that the automated method will greatly facilitate further progress in the use of AFM for the determination of receptor and multi-protein architecture.     

Structural and morphological studies on the deformation behavior of polypropylene/multi‐walled carbon nanotubes nanocomposites prepared through ultrasound‐assisted melt extrusion process

Structural and morphological behavior under stress–strain of polypropylene/multi‐walled carbon nanotubes (PP/MWCNTs) nanocomposites prepared through ultrasound‐assisted melt extrusion process was studied by means of optical microscopy, scanning electron microscopy, transmission electron microscopy, Raman spectroscopy, small angle X‐ray scattering (SAXS), and wide angle X‐ray scattering (WAXS). A high ductile behavior was observed in the PP/MWCNT nanocomposites with low concentration of MWCNTs. This was related to an energy‐dissipating mechanism, achieved by the formation of an ordered PP‐CNTs interphase zone and crystal oriented structure in the undeformed samples. Different strain‐induced‐phase transformations were observed by ex situ SAXS/WAXS, characterizing the different stages of structure development during the deformation of PP and PP/MWCNTs nanocomposites. The high concentration of CNTs reduced the strain behavior of PP due to the agglomeration of nanoparticles. A structural pathway relating the deformation‐induced phase transitions and the dissipation energy mechanism in the PP/MWCNTs nanocomposites at low concentration of nanoparticles was proposed. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 475–491     

RESTRICTED LIE ALGEBRAS WITH MAXIMAL 0-PIM

In this paper it is shown that the projective cover of the trivial irreducible module of a finite-dimensional solvable restricted Lie algebra is induced from the one dimensional trivial module of a maximal torus. As a consequence, the number of the isomorphism classes of irreducible modules with a fixed p-character for a finite-dimensional solvable restricted Lie algebra L is bounded above by p ^MT(L), where MT(L) denotes the maximal dimension of a torus in L. Finally, it is proved that in characteristic p > 3 the projective cover of the trivial irreducible L-module is induced from the one-dimensional trivial module of a torus of maximal dimension, only if L is solvable.     

A new plastic scintillation resin for single-step separation,concentration and measurement of technetium-99

Technetium is a synthetic element with no stable isotopes, produced as waste in nuclear power plants and in cyclotrons used for nuclear medicine. The element has high mobility, in the form of TcO₄⁻; its determination is therefore important for environmental protection. Technetium is found in low concentrations and therefore common methods for its analysis include long treatments in several steps and require large amounts of reagents for its purification and preconcentration. Plastic scintillation resins (PSresin) are novel materials used to separate, preconcentrate and measure radionuclides in a single step. The objective of this study is to prepare and characterise a PSresin for the preconcentration and measurement of ⁹⁹Tc. The study first evaluates the reproducibility of the production of PSresins between batches and over time; showing good reproducibility and storage stability. Next, we studied the effect of some common non-radioactive interferences, showing small influences on measurement, and radioactive interferences (³⁶Cl and ²³⁸U/²³⁴U). ³⁶Cl can be removed by a simple treatment with 0.5 M HCl and ²³⁸U/²³⁴U can be removed from the column by cleaning with a mixture of 0.1 M HNO₃ and 0.1 M HF. In the latter case, a slight change in the morphology of the PSresin caused an increase in detection efficiency. Finally, the PSresin was applied to the measurement of real spiked samples (sea water and urine) with deviations lower than 10% in all cases.