Hadron production from photon-photon interactions in the CM energy range from 1 to 5 GeV

We present the first data on photon-photon annihilation into hadrons for CM energies > 1 GeV obtained with the detector PLUTO at the e⁺e^? storage ring PETRA. Cross sections are extracted using an inelastic eγ scattering formalism. The results are compared to expectations from Regge-like models.     

Four-wave mixing of light beams with engineered orbital angular momentum in cold cesium atoms

We report an experimental demonstration that shows that the spatial structure carried by engineered coherent superpositions of light beams with orbital angular momentum can be mapped into the nonlinear polarization induced in a cloud of cold cesium atoms. The structure of such polarization was revealed by nearly degenerate four-wave-mixing processes.     

Detection of freeze injury in oranges by magnetic resonance imaging of moving samples

Magnetic resonance imaging (MRI) is applied for on-line inspection of fruits. The aim of this work is to address the applicability of MRI for freeze injury detection in oranges directly on a distribution chain. Undamaged and damaged oranges are conveyed at 50 and 100 mm/s by a specially designed conveyor within a 4.7 T spectrometer obtaining fast low-angle shot images. An automatic segmentation algorithm is proposed that allows the discrimination between undamaged and damaged oranges.     

Chiral separation of gamma-butyrolactone derivatives by gas chromatography on 2,3-di-O-methyl-6-O-tert.-butyldimethylsilyl-beta-cyclodextrin

The chiral GC separation of 2-alkyl-2-keto-gamma-butyrolactone derivatives and their alcohol analogs using 2,3-di-O-methyl-6-O-tert.-butyldimethylsilyl-beta-cyclodextrin (DIMETBCD) as chiral selector was discussed. The results, supported by the ketone preliminary molecular modelling calculations, suggest that the chiral recognition for DIMETBCD depends more on the geometry than on the polarity of the alkyl substituents on the butyrolactones. Hydrogen bonds and alkyl group steric effects should be an important function of the alcohol chiral recognition for DIMETBCD. Comparison of the retention times of the alcohol derivatives, in achiral and chiral stationary phases, suggests a specific structural effect for the cyclodextrin selctor.     

铸造铝青铜合金Cu-14Al-4Fe-Mn的摩擦磨损性能

用往复式摩擦磨损试验机考察了新型高强度、高耐磨性铸造铝青铜合金Cu-14Al-4Fe-Mn(代号HSWAB)的摩擦磨损性能,利用形貌扫描电子显微镜观察分析了合金磨损表面形貌,探讨了其磨损机理.结果表明,HSWAB合金在干摩擦和油润滑条件下的摩擦磨损性能及磨损机理存在明显差异.在干摩擦条件下,合金中脱落的硬质点及氧化物等磨粒导致较为严重的磨粒磨损,摩擦系数高、磨损率大,主要磨损机理为磨粒磨损、粘着磨损、氧化磨损及疲劳磨损.在油润滑条件下,摩擦系数和磨损率均显著降低,疲劳磨损和氧化磨损受到抑制,主要磨损机理为磨粒磨损和粘着磨损.Cu-14Al-4Fe-Mn合金在油润滑条件下的摩擦系数低达0.08,磨损率低达3.7×10-6g/m,是一种优良的耐磨材料.     

Synthesis and antimicrobial activities of silver(I) sulfanylcarboxylates. Structural isomers with identically or unequally coordinated Ag centers in an Ag4S4 ring

We have investigated the reactions of silver nitrate and 3-(aryl)-2-sulfanylpropenoic acids [H(2)xspa, x: p = 3-phenyl-, f = 3-(2-furyl)-, t = 3-(2-thienyl)-, py = 3-(2-pyridyl)-] and 2-cyclopentylidene-2-sulfanylacetic acid (H(2)L) in 1 : 1 and 2 : 1 molar ratios. The 1 : 1 molar ratio gave compounds of type [Ag(HL)]; reaction of these compounds with diisopropylamine and NaOH gave [HQ][Ag(L)] (HQ = diisopropylammonium) and Na[Ag(L)] x H(2)O, respectively. These compounds, as well as those of type [Ag(2)(L)] obtained with the 1 : 2 molar ratio, were isolated and characterized by IR and NMR ((1)H and (13)C) spectroscopy. (109)Ag NMR spectroscopy and ESI-MS spectrometry were also used in some cases. The crystal structures of [HQ][Ag(pspa)] (11), in which the presence of structural isomers was detected, and [HQ][Ag(cpa)] (15) were determined by X-ray diffractometry. The antimicrobial activity of the complexes against E. coli, S. aureus, B. subtilis, P. aeruginosa/Resistant P. aeruginosa, and C. albicans was tested.     

乙酸铵离心交换法和乙酸钙离心交换法测定土壤阳离子交换量

土壤阳离子交换量(CEC)的测定在农业中有重要的意义,对农业行业标准NY/T295—1995和NY/T1121.5—2006中的离心交换法测定土壤中CEC值的方法进行了优化,讨论了不同pH值的土壤样品对两种方法的选择依据,分析了CEC值测定重现性较差的原因。结果表明,pH值的范围是方法选择的重要依据,pH7.0的样品适合用乙酸铵离心交换法,pH≥7.0的样品则适用乙酸钙离心交换法。优化后方法的准确度和精密度有了较大的改善,实验中对各步骤的优化缩短了约40%的操作时间,减少工作量,适合于批量样品的准确测定。     

Effect of S–Se Bioisosteric Exchange on Affinity and Intrinsic Efficacy of Novel N-acylhydrazone Derivatives at the Adenosine A2A Receptor

In this work, we evaluated the conformational effect promoted by the isosteric exchange of sulfur by selenium in the heteroaromatic ring of new N-acylhydrazone (NAH) derivatives (3–8, 13, 14), analogues of the cardioactive compounds LASSBio-294 (1) and LASSBio-785 (2). NMR spectra analysis demonstrated a chemical shift variation of the iminic Csp² of NAH S/Se-isosters, suggesting a stronger intramolecular chalcogen interaction for Se-derivatives. To investigate the pharmacological profile of these compounds at the adenosine A_2A receptor (A_2AR), we performed a previously validated functional binding assay. As expected for bioisosteres, the isosteric-S/Se replacement affected neither the affinity nor the intrinsic efficacy of our NAH derivatives (1–8). However, the N-methylated compounds (2, 6–8) presented a weak partial agonist profile at A_2AR, contrary to the non-methylated counterparts (1, 3–5), which appeared as weak inverse agonists. Additionally, retroisosterism between aromatic rings of NAH on S/Se-isosters mimicked the effect of the N-methylation on intrinsic efficacy at A_2AR, while meta-substitution in the phenyl ring of the acyl moiety did not. This study showed that the conformational effect of NAH-N-methylation and aromatic rings retroisosterism changed the intrinsic efficacy on A_2AR, indicating the S/Se-chalcogen effect to drive the conformational behavior of this series of NAH.     

纳氏试剂测定水中氨氮影响因素的探讨

对国家生活饮用水标准检验方法"GB/T5750—2006"中涉及到的水中氨氮的检测条件进行了探讨,讨论了样品的采集与保存,影响显色、空白值的各项因素,并提出相应的解决办法。对国家标准物质以及实际样品的验证表明,方法的相对误差为0.03%~1.5%,相对标准偏差RSD为0.55%~5.3%,准确度也能满足分析要求,对国家标准方法进行了补充与细化,在实际工作中有参考价值。     

铁基大块非晶合金的摩擦磨损性能研究

采用电弧熔炼、铜模吸铸法制备Fe基大块非晶合金,利用球-盘式摩擦磨损试验机进行干摩擦磨损试验,研究了铸态Fe基大块非晶合金的摩擦磨损行为及热处理对其耐磨性的影响,利用扫描电子显微镜观察合金磨损表面形貌,分析了Fe基大块非晶合金以及相同成分晶态合金的磨损机理.结果表明:在本试验条件下,铸态Fe基大块非晶合金的耐磨性高于相同成分的晶态合金,热处理可以有效提高铸态Fe基大块非晶合金的耐磨性,在保持完全非晶状态的前提下,退火态非晶合金的磨损率较铸态非晶合金减小约40%;材料的结构和性能对合金的摩擦系数影响不大,当进入稳定阶段后Fe基大块非晶合金的摩擦系数稳定在0.58左右;不同处理状态的Fe基大块非晶合金和相同成分晶态合金的磨损机制不同,非晶合金的磨损机制以疲劳磨损为主兼有磨粒磨损,相同成分晶态合金的磨损机制为粘着磨损和磨粒磨损共同作用的结果.